开源软件构建与测试

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

Changes of Revision 2

_service:extract_file:bzip2.spec Deleted

@@ -1,127 +0,0 @@
-Name:		bzip2
-Version:	1.0.8
-Release:	4
-Summary:	A high-quality data compressor
-
-License:	BSD
-URL:		https://www.sourceware.org/bzip2/
-Source0:	https://sourceware.org/pub/bzip2/%{name}-%{version}.tar.gz
-Source1:	bzip2.pc
-
-Patch0:		0001-add-compile-option.patch
-Patch1:		0002-CVE-2019-12900.patch
-
-BuildRequires:	gcc 
-
-Provides:       bzip2-libs
-Obsoletes:      bzip2-libs
-
-%description
-bzip2 is a freely available, patent free, high-quality data compressor.
-It typically compresses files to within 10% to 15% of the best available
-techniques (the PPM family of statistical compressors), whilst being
-around twice as fast at compression and six times faster at decompression.
-
-%package	devel
-Summary:	header files for bzip2
-Requires:	%{name} = %{version}-%{release}
-Provides:       bzip2-static
-Obsoletes:      bzip2-static
-
-%description	devel
-header files for bzip2
-
-%package_help
-
-%prep
-%autosetup -n %{name}-%{version} -p1
-
-%build
-%make_build -f Makefile-libbz2_so "CFLAGS=%{optflags} -Winline -fpic -fPIC -D_FILE_OFFSET_BITS=64"
-%make_build "CFLAGS=%{optflags} -fpic -fPIC -Winline -D_FILE_OFFSET_BITS=64"
-
-%install
-rm -rf %RPM_BUILD_ROOT
-%make_install PREFIX=%{buildroot}%{_prefix}
-
-# Default install path is /usr/bin lib man, change dest dirs here.
-pushd %{buildroot}%{_prefix}
-mkdir -p share
-mv man/ share/
-mv lib lib64
-popd
-
-ln -fs bzdiff %{buildroot}%{_bindir}/bzcmp
-ln -fs bzgrep %{buildroot}%{_bindir}/bzegrep
-ln -fs bzgrep %{buildroot}%{_bindir}/bzfgrep
-ln -fs bzmore %{buildroot}%{_bindir}/bzless
-install -m 0755 *.so* %{buildroot}%{_libdir}
-ln -s libbz2.so.%{version} %{buildroot}%{_libdir}/libbz2.so.1
-ln -s libbz2.so.1 %{buildroot}%{_libdir}/libbz2.so
-cp %{SOURCE1} .
-sed -i "s@^libdir=@libdir=%{_libdir}@" bzip2.pc
-mkdir -p %{buildroot}%{_libdir}/pkgconfig
-install -m 0644 bzip2.pc %{buildroot}%{_libdir}/pkgconfig/
-ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bunzip2.1.gz
-ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bzcat.1.gz
-ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bzip2recover.1.gz
-
-%check
-make check
-
-%ldconfig_scriptlets
-
-%files
-%defattr(-,root,root)
-%doc CHANGES LICENSE README
-%license LICENSE
-%{_bindir}/*
-%{_libdir}/*.so.*
-
-%files devel
-%defattr(-,root,root)
-%{_includedir}/bzlib.h
-%{_libdir}/*.so
-%{_libdir}/pkgconfig/
-%{_libdir}/*.a
-
-%files help
-%doc manual.html manual.pdf
-%{_mandir}/man1/b*.1.gz
-
-%changelog
-* Thu Jul 22 2021 wuchaochao <wuchaochao4@huawei.com> - 1.0.8-4
-- Remove BuildRequires gdb
-
-* Sat Mar 21 2020 chengquan<chengquan3@huawei.com> - 1.0.8-3
-- Add fPIC option to make the self-compiled environment build normally
-
-* Wed Mar 11 2020 yangjian<yangjian79.huawei.com> - 1.0.8-2
-- Fix dependency
-
-* Sat Oct 19 2019 openEuler Builteam <buildteam@openeuler.org> - 1.0.8-1
-- update bzip2
-
-* Tue Sep 24 2019 shenyangyang<shenyangyang4@huawei.com> - 1.0.6-33
-- Type:enhancement
-- ID:NA
-- SUG:NA
-- DESC:add help package and combine packages
-
-* Mon Aug 12 2019 openEuler Builteam <buildteam@openeuler.org> - 1.0.6-32
-- rewrite spec
-
-* Thu Jul 25 2019 wangchan<wangchan9@huawei.com> - 1.0.6-31
-- Modify version number
-
-* Tue Jul 16 2019 wangchan<wangchan9@huawei.com> - 1.0.6-30
-- Modify version number
-
-* Mon Jul 15 2019 wangchan<wangchan9@huawei.com> - 1.0.6-29
-- Type:security
-- ID:CVE-2019-12900
-- SUG:restart
-- DESC: fix CVE-2019-12900
-
-* Thu Jul 12 2018 openEuler Builteam <buildteam@openeuler.org>> - 1.0.6-28
-- Package init

_service:tar_scm:bzip2.spec Added

@@ -0,0 +1,130 @@
+Name:		bzip2
+Version:	1.0.8
+Release:	5
+Summary:	A high-quality data compressor
+
+License:	BSD
+URL:		https://www.sourceware.org/bzip2/
+Source0:	https://sourceware.org/pub/bzip2/%{name}-%{version}.tar.gz
+Source1:	bzip2.pc
+
+Patch0:		0001-add-compile-option.patch
+Patch1:		0002-CVE-2019-12900.patch
+
+BuildRequires:	gcc 
+
+Provides:       bzip2-libs
+Obsoletes:      bzip2-libs
+
+%description
+bzip2 is a freely available, patent free, high-quality data compressor.
+It typically compresses files to within 10% to 15% of the best available
+techniques (the PPM family of statistical compressors), whilst being
+around twice as fast at compression and six times faster at decompression.
+
+%package	devel
+Summary:	header files for bzip2
+Requires:	%{name} = %{version}-%{release}
+Provides:       bzip2-static
+Obsoletes:      bzip2-static
+
+%description	devel
+header files for bzip2
+
+%package_help
+
+%prep
+%autosetup -n %{name}-%{version} -p1
+
+%build
+%make_build -f Makefile-libbz2_so "CFLAGS=%{optflags} -Winline -fpic -fPIC -D_FILE_OFFSET_BITS=64"
+%make_build "CFLAGS=%{optflags} -fpic -fPIC -Winline -D_FILE_OFFSET_BITS=64"
+
+%install
+rm -rf %RPM_BUILD_ROOT
+%make_install PREFIX=%{buildroot}%{_prefix}
+
+# Default install path is /usr/bin lib man, change dest dirs here.
+pushd %{buildroot}%{_prefix}
+mkdir -p share
+mv man/ share/
+mv lib lib64
+popd
+
+ln -fs bzdiff %{buildroot}%{_bindir}/bzcmp
+ln -fs bzgrep %{buildroot}%{_bindir}/bzegrep
+ln -fs bzgrep %{buildroot}%{_bindir}/bzfgrep
+ln -fs bzmore %{buildroot}%{_bindir}/bzless
+install -m 0755 libbz2.so.%{version}  %{buildroot}%{_libdir}
+ln -s libbz2.so.%{version} %{buildroot}%{_libdir}/libbz2.so.1
+ln -s libbz2.so.1 %{buildroot}%{_libdir}/libbz2.so
+cp %{SOURCE1} .
+sed -i "s@^libdir=@libdir=%{_libdir}@" bzip2.pc
+mkdir -p %{buildroot}%{_libdir}/pkgconfig
+install -m 0644 bzip2.pc %{buildroot}%{_libdir}/pkgconfig/
+ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bunzip2.1.gz
+ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bzcat.1.gz
+ln -s bzip2.1.gz %{buildroot}%{_mandir}/man1/bzip2recover.1.gz
+
+%check
+make check
+
+%ldconfig_scriptlets
+
+%files
+%defattr(-,root,root)
+%doc CHANGES LICENSE README
+%license LICENSE
+%{_bindir}/*
+%{_libdir}/*.so.*
+
+%files devel
+%defattr(-,root,root)
+%{_includedir}/bzlib.h
+%{_libdir}/*.so
+%{_libdir}/pkgconfig/
+%{_libdir}/*.a
+
+%files help
+%doc manual.html manual.pdf
+%{_mandir}/man1/b*.1.gz
+
+%changelog
+* Tue Sep 20 2022 zhoupengcheng <zhoupengcheng11@huawei.com> - 1.0.8-5
+- Delete redundant .so files 
+
+* Thu Jul 22 2021 wuchaochao <wuchaochao4@huawei.com> - 1.0.8-4
+- Remove BuildRequires gdb
+
+* Sat Mar 21 2020 chengquan<chengquan3@huawei.com> - 1.0.8-3
+- Add fPIC option to make the self-compiled environment build normally
+
+* Wed Mar 11 2020 yangjian<yangjian79.huawei.com> - 1.0.8-2
+- Fix dependency
+
+* Sat Oct 19 2019 openEuler Builteam <buildteam@openeuler.org> - 1.0.8-1
+- update bzip2
+
+* Tue Sep 24 2019 shenyangyang<shenyangyang4@huawei.com> - 1.0.6-33
+- Type:enhancement
+- ID:NA
+- SUG:NA
+- DESC:add help package and combine packages
+
+* Mon Aug 12 2019 openEuler Builteam <buildteam@openeuler.org> - 1.0.6-32
+- rewrite spec
+
+* Thu Jul 25 2019 wangchan<wangchan9@huawei.com> - 1.0.6-31
+- Modify version number
+
+* Tue Jul 16 2019 wangchan<wangchan9@huawei.com> - 1.0.6-30
+- Modify version number
+
+* Mon Jul 15 2019 wangchan<wangchan9@huawei.com> - 1.0.6-29
+- Type:security
+- ID:CVE-2019-12900
+- SUG:restart
+- DESC: fix CVE-2019-12900
+
+* Thu Jul 12 2018 openEuler Builteam <buildteam@openeuler.org>> - 1.0.6-28
+- Package init

_service:extract_file:0001-add-compile-option.patch Deleted

@@ -1,52 +0,0 @@
-From 70218c0c89b399fdc6febea92aae5dcc6ad32f56 Mon Sep 17 00:00:00 2001
-From: lvying <lvying6@huawei.com>
-Date: Sat, 19 Oct 2019 13:07:28 +0800
-Subject: PATCH 1/2 add compile option
-
-Signed-off-by: lvying <lvying6@huawei.com>
----
- Makefile           | 4 ----
- Makefile-libbz2_so | 5 ++---
- 2 files changed, 2 insertions(+), 7 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index f8a1772..69ea7b2 100644
---- a/Makefile
-+++ b/Makefile
-@@ -18,10 +18,6 @@ SHELL=/bin/sh
- CC=gcc
- AR=ar
- RANLIB=ranlib
--LDFLAGS=
--
--BIGFILES=-D_FILE_OFFSET_BITS=64
--CFLAGS=-Wall -Winline -O2 -g $(BIGFILES)
- 
- # Where you want it installed when you do 'make install'
- PREFIX=/usr/local
-diff --git a/Makefile-libbz2_so b/Makefile-libbz2_so
-index fb0f230..1eaf26a 100644
---- a/Makefile-libbz2_so
-+++ b/Makefile-libbz2_so
-@@ -24,7 +24,6 @@
- SHELL=/bin/sh
- CC=gcc
- BIGFILES=-D_FILE_OFFSET_BITS=64
--CFLAGS=-fpic -fPIC -Wall -Winline -O2 -g $(BIGFILES)
- 
- OBJS= blocksort.o  \
-       huffman.o    \
-@@ -35,8 +34,8 @@ OBJS= blocksort.o  \
-       bzlib.o
- 
- all: $(OBJS)
--	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.8 $(OBJS)
--	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
-+	$(CC) $(CFLAGS) $(LDFLAGS) -shared -Wl,-soname -Wl,libbz2.so.1 -o libbz2.so.1.0.8 $(OBJS)
-+	$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
- 	rm -f libbz2.so.1.0
- 	ln -s libbz2.so.1.0.8 libbz2.so.1.0
- 
--- 
-1.8.3.1
-

_service:extract_file:0002-CVE-2019-12900.patch Deleted

@@ -1,32 +0,0 @@
-From 52f520db6cda25f18e26208745f1b92803d5d559 Mon Sep 17 00:00:00 2001
-From: Albert Astals Cid <aacid@kde.org>
-Date: Tue, 28 May 2019 19:35:18 +0200
-Subject: PATCH 2/2 Make sure nSelectors is not out of range
-
-nSelectors is used in a loop from 0 to nSelectors to access selectorMtf
-which is
-	UChar    selectorMtfBZ_MAX_SELECTORS;
-so if nSelectors is bigger than BZ_MAX_SELECTORS it'll do an invalid memory
-access
-
-Fixes out of bounds access discovered while fuzzying karchive
----
- decompress.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/decompress.c b/decompress.c
-index a1a0bac..e1fabdb 100644
---- a/decompress.c
-+++ b/decompress.c
-@@ -287,7 +287,7 @@ Int32 BZ2_decompress ( DState* s )
-       GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
-       if (nGroups < 2 || nGroups > BZ_N_GROUPS) RETURN(BZ_DATA_ERROR);
-       GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
--      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
-+      if (nSelectors < 1 || nSelectors > BZ_MAX_SELECTORS) RETURN(BZ_DATA_ERROR);
-       for (i = 0; i < nSelectors; i++) {
-          j = 0;
-          while (True) {
--- 
-1.8.3.1
-

_service:tar_scm:0001-add-compile-option.patch Added

@@ -0,0 +1,52 @@
+From 70218c0c89b399fdc6febea92aae5dcc6ad32f56 Mon Sep 17 00:00:00 2001
+From: lvying <lvying6@huawei.com>
+Date: Sat, 19 Oct 2019 13:07:28 +0800
+Subject: PATCH 1/2 add compile option
+
+Signed-off-by: lvying <lvying6@huawei.com>
+---
+ Makefile           | 4 ----
+ Makefile-libbz2_so | 5 ++---
+ 2 files changed, 2 insertions(+), 7 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index f8a1772..69ea7b2 100644
+--- a/Makefile
++++ b/Makefile
+@@ -18,10 +18,6 @@ SHELL=/bin/sh
+ CC=gcc
+ AR=ar
+ RANLIB=ranlib
+-LDFLAGS=
+-
+-BIGFILES=-D_FILE_OFFSET_BITS=64
+-CFLAGS=-Wall -Winline -O2 -g $(BIGFILES)
+ 
+ # Where you want it installed when you do 'make install'
+ PREFIX=/usr/local
+diff --git a/Makefile-libbz2_so b/Makefile-libbz2_so
+index fb0f230..1eaf26a 100644
+--- a/Makefile-libbz2_so
++++ b/Makefile-libbz2_so
+@@ -24,7 +24,6 @@
+ SHELL=/bin/sh
+ CC=gcc
+ BIGFILES=-D_FILE_OFFSET_BITS=64
+-CFLAGS=-fpic -fPIC -Wall -Winline -O2 -g $(BIGFILES)
+ 
+ OBJS= blocksort.o  \
+       huffman.o    \
+@@ -35,8 +34,8 @@ OBJS= blocksort.o  \
+       bzlib.o
+ 
+ all: $(OBJS)
+-	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.8 $(OBJS)
+-	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
++	$(CC) $(CFLAGS) $(LDFLAGS) -shared -Wl,-soname -Wl,libbz2.so.1 -o libbz2.so.1.0.8 $(OBJS)
++	$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
+ 	rm -f libbz2.so.1.0
+ 	ln -s libbz2.so.1.0.8 libbz2.so.1.0
+ 
+-- 
+1.8.3.1
+

_service:tar_scm:0002-CVE-2019-12900.patch Added

@@ -0,0 +1,32 @@
+From 52f520db6cda25f18e26208745f1b92803d5d559 Mon Sep 17 00:00:00 2001
+From: Albert Astals Cid <aacid@kde.org>
+Date: Tue, 28 May 2019 19:35:18 +0200
+Subject: PATCH 2/2 Make sure nSelectors is not out of range
+
+nSelectors is used in a loop from 0 to nSelectors to access selectorMtf
+which is
+	UChar    selectorMtfBZ_MAX_SELECTORS;
+so if nSelectors is bigger than BZ_MAX_SELECTORS it'll do an invalid memory
+access
+
+Fixes out of bounds access discovered while fuzzying karchive
+---
+ decompress.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/decompress.c b/decompress.c
+index a1a0bac..e1fabdb 100644
+--- a/decompress.c
++++ b/decompress.c
+@@ -287,7 +287,7 @@ Int32 BZ2_decompress ( DState* s )
+       GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
+       if (nGroups < 2 || nGroups > BZ_N_GROUPS) RETURN(BZ_DATA_ERROR);
+       GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
+-      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
++      if (nSelectors < 1 || nSelectors > BZ_MAX_SELECTORS) RETURN(BZ_DATA_ERROR);
+       for (i = 0; i < nSelectors; i++) {
+          j = 0;
+          while (True) {
+-- 
+1.8.3.1
+

_service Changed

_service:extract_file:bzip2-1.0.8.tar.gz Deleted

_service:extract_file:bzip2.pc Deleted

_service:extract_file:bzip2.yaml Deleted

_service:tar_scm:bzip2-1.0.8.tar.gz/CHANGES Added

@@ -0,0 +1,356 @@
+ ------------------------------------------------------------------
+ This file is part of bzip2/libbzip2, a program and library for
+ lossless, block-sorting data compression.
+
+ bzip2/libbzip2 version 1.0.8 of 13 July 2019
+ Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+ Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+ README file.
+
+ This program is released under the terms of the license contained
+ in the file LICENSE.
+ ------------------------------------------------------------------
+
+
+0.9.0
+~~~~~
+First version.
+
+
+0.9.0a
+~~~~~~
+Removed 'ranlib' from Makefile, since most modern Unix-es 
+don't need it, or even know about it.
+
+
+0.9.0b
+~~~~~~
+Fixed a problem with error reporting in bzip2.c.  This does not effect
+the library in any way.  Problem is: versions 0.9.0 and 0.9.0a (of the
+program proper) compress and decompress correctly, but give misleading
+error messages (internal panics) when an I/O error occurs, instead of
+reporting the problem correctly.  This shouldn't give any data loss
+(as far as I can see), but is confusing.
+
+Made the inline declarations disappear for non-GCC compilers.
+
+
+0.9.0c
+~~~~~~
+Fixed some problems in the library pertaining to some boundary cases.
+This makes the library behave more correctly in those situations.  The
+fixes apply only to features (calls and parameters) not used by
+bzip2.c, so the non-fixedness of them in previous versions has no
+effect on reliability of bzip2.c.
+
+In bzlib.c:
+   * made zero-length BZ_FLUSH work correctly in bzCompress().
+   * fixed bzWrite/bzRead to ignore zero-length requests.
+   * fixed bzread to correctly handle read requests after EOF.
+   * wrong parameter order in call to bzDecompressInit in
+     bzBuffToBuffDecompress.  Fixed.
+
+In compress.c:
+   * changed setting of nGroups in sendMTFValues() so as to 
+     do a bit better on small files.  This _does_ effect
+     bzip2.c.
+
+
+0.9.5a
+~~~~~~
+Major change: add a fallback sorting algorithm (blocksort.c)
+to give reasonable behaviour even for very repetitive inputs.
+Nuked --repetitive-best and --repetitive-fast since they are
+no longer useful.
+
+Minor changes: mostly a whole bunch of small changes/
+bugfixes in the driver (bzip2.c).  Changes pertaining to the
+user interface are:
+
+   allow decompression of symlink'd files to stdout
+   decompress/test files even without .bz2 extension
+   give more accurate error messages for I/O errors
+   when compressing/decompressing to stdout, don't catch control-C
+   read flags from BZIP2 and BZIP environment variables
+   decline to break hard links to a file unless forced with -f
+   allow -c flag even with no filenames
+   preserve file ownerships as far as possible
+   make -s -1 give the expected block size (100k)
+   add a flag -q --quiet to suppress nonessential warnings
+   stop decoding flags after --, so files beginning in - can be handled
+   resolved inconsistent naming: bzcat or bz2cat ?
+   bzip2 --help now returns 0
+
+Programming-level changes are:
+
+   fixed syntax error in GET_LL4 for Borland C++ 5.02
+   let bzBuffToBuffDecompress return BZ_DATA_ERROR{_MAGIC}
+   fix overshoot of mode-string end in bzopen_or_bzdopen
+   wrapped bzlib.h in #ifdef __cplusplus ... extern "C" { ... }
+   close file handles under all error conditions
+   added minor mods so it compiles with DJGPP out of the box
+   fixed Makefile so it doesn't give problems with BSD make
+   fix uninitialised memory reads in dlltest.c
+
+0.9.5b
+~~~~~~
+Open stdin/stdout in binary mode for DJGPP.
+
+0.9.5c
+~~~~~~
+Changed BZ_N_OVERSHOOT to be ... + 2 instead of ... + 1.  The + 1
+version could cause the sorted order to be wrong in some extremely
+obscure cases.  Also changed setting of quadrant in blocksort.c.
+
+0.9.5d
+~~~~~~
+The only functional change is to make bzlibVersion() in the library
+return the correct string.  This has no effect whatsoever on the
+functioning of the bzip2 program or library.  Added a couple of casts
+so the library compiles without warnings at level 3 in MS Visual
+Studio 6.0.  Included a Y2K statement in the file Y2K_INFO.  All other
+changes are minor documentation changes.
+
+1.0
+~~~
+Several minor bugfixes and enhancements:
+
+* Large file support.  The library uses 64-bit counters to
+  count the volume of data passing through it.  bzip2.c 
+  is now compiled with -D_FILE_OFFSET_BITS=64 to get large
+  file support from the C library.  -v correctly prints out
+  file sizes greater than 4 gigabytes.  All these changes have
+  been made without assuming a 64-bit platform or a C compiler
+  which supports 64-bit ints, so, except for the C library
+  aspect, they are fully portable.
+
+* Decompression robustness.  The library/program should be
+  robust to any corruption of compressed data, detecting and
+  handling _all_ corruption, instead of merely relying on
+  the CRCs.  What this means is that the program should 
+  never crash, given corrupted data, and the library should
+  always return BZ_DATA_ERROR.
+
+* Fixed an obscure race-condition bug only ever observed on
+  Solaris, in which, if you were very unlucky and issued
+  control-C at exactly the wrong time, both input and output
+  files would be deleted.
+
+* Don't run out of file handles on test/decompression when
+  large numbers of files have invalid magic numbers.
+
+* Avoid library namespace pollution.  Prefix all exported 
+  symbols with BZ2_.
+
+* Minor sorting enhancements from my DCC2000 paper.
+
+* Advance the version number to 1.0, so as to counteract the
+  (false-in-this-case) impression some people have that programs 
+  with version numbers less than 1.0 are in some way, experimental,
+  pre-release versions.
+
+* Create an initial Makefile-libbz2_so to build a shared library.
+  Yes, I know I should really use libtool et al ...
+
+* Make the program exit with 2 instead of 0 when decompression
+  fails due to a bad magic number (ie, an invalid bzip2 header).
+  Also exit with 1 (as the manual claims :-) whenever a diagnostic
+  message would have been printed AND the corresponding operation 
+  is aborted, for example
+     bzip2: Output file xx already exists.
+  When a diagnostic message is printed but the operation is not 
+  aborted, for example
+     bzip2: Can't guess original name for wurble -- using wurble.out
+  then the exit value 0 is returned, unless some other problem is
+  also detected.
+
+  I think it corresponds more closely to what the manual claims now.
+
+
+1.0.1
+~~~~~
+* Modified dlltest.c so it uses the new BZ2_ naming scheme.
+* Modified makefile-msc to fix minor build probs on Win2k.
+* Updated README.COMPILATION.PROBLEMS.
+
+There are no functionality changes or bug fixes relative to version
+1.0.0.  This is just a documentation update + a fix for minor Win32
+build problems.  For almost everyone, upgrading from 1.0.0 to 1.0.1 is
+utterly pointless.  Don't bother.
+
+
+1.0.2
+~~~~~
+A bug fix release, addressing various minor issues which have appeared
+in the 18 or so months since 1.0.1 was released.  Most of the fixes
+are to do with file-handling or documentation bugs.  To the best of my
+knowledge, there have been no data-loss-causing bugs reported in the
+compression/decompression engine of 1.0.0 or 1.0.1.
+
+Note that this release does not improve the rather crude build system
+for Unix platforms.  The general plan here is to autoconfiscate/
+libtoolise 1.0.2 soon after release, and release the result as 1.1.0
+or perhaps 1.2.0.  That, however, is still just a plan at this point.
+
+Here are the changes in 1.0.2.  Bug-reporters and/or patch-senders in
+parentheses.
+
+* Fix an infinite segfault loop in 1.0.1 when a directory is

_service:tar_scm:bzip2-1.0.8.tar.gz/LICENSE Added

@@ -0,0 +1,42 @@
+
+--------------------------------------------------------------------------
+
+This program, "bzip2", the associated library "libbzip2", and all
+documentation, are copyright (C) 1996-2019 Julian R Seward.  All
+rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+2. The origin of this software must not be misrepresented; you must 
+   not claim that you wrote the original software.  If you use this 
+   software in a product, an acknowledgment in the product 
+   documentation would be appreciated but is not required.
+
+3. Altered source versions must be plainly marked as such, and must
+   not be misrepresented as being the original software.
+
+4. The name of the author may not be used to endorse or promote 
+   products derived from this software without specific prior written 
+   permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Julian Seward, jseward@acm.org
+bzip2/libbzip2 version 1.0.8 of 13 July 2019
+
+--------------------------------------------------------------------------

_service:tar_scm:bzip2-1.0.8.tar.gz/Makefile Added

@@ -0,0 +1,217 @@
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.8 of 13 July 2019
+# Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
+
+SHELL=/bin/sh
+
+# To assist in cross-compiling
+CC=gcc
+AR=ar
+RANLIB=ranlib
+LDFLAGS=
+
+BIGFILES=-D_FILE_OFFSET_BITS=64
+CFLAGS=-Wall -Winline -O2 -g $(BIGFILES)
+
+# Where you want it installed when you do 'make install'
+PREFIX=/usr/local
+
+
+OBJS= blocksort.o  \
+      huffman.o    \
+      crctable.o   \
+      randtable.o  \
+      compress.o   \
+      decompress.o \
+      bzlib.o
+
+all: libbz2.a bzip2 bzip2recover test
+
+bzip2: libbz2.a bzip2.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2 bzip2.o -L. -lbz2
+
+bzip2recover: bzip2recover.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2recover bzip2recover.o
+
+libbz2.a: $(OBJS)
+	rm -f libbz2.a
+	$(AR) cq libbz2.a $(OBJS)
+	@if ( test -f $(RANLIB) -o -f /usr/bin/ranlib -o \
+		-f /bin/ranlib -o -f /usr/ccs/bin/ranlib ) ; then \
+		echo $(RANLIB) libbz2.a ; \
+		$(RANLIB) libbz2.a ; \
+	fi
+
+check: test
+test: bzip2
+	@cat words1
+	./bzip2 -1  < sample1.ref > sample1.rb2
+	./bzip2 -2  < sample2.ref > sample2.rb2
+	./bzip2 -3  < sample3.ref > sample3.rb2
+	./bzip2 -d  < sample1.bz2 > sample1.tst
+	./bzip2 -d  < sample2.bz2 > sample2.tst
+	./bzip2 -ds < sample3.bz2 > sample3.tst
+	cmp sample1.bz2 sample1.rb2 
+	cmp sample2.bz2 sample2.rb2
+	cmp sample3.bz2 sample3.rb2
+	cmp sample1.tst sample1.ref
+	cmp sample2.tst sample2.ref
+	cmp sample3.tst sample3.ref
+	@cat words3
+
+install: bzip2 bzip2recover
+	if ( test ! -d $(PREFIX)/bin ) ; then mkdir -p $(PREFIX)/bin ; fi
+	if ( test ! -d $(PREFIX)/lib ) ; then mkdir -p $(PREFIX)/lib ; fi
+	if ( test ! -d $(PREFIX)/man ) ; then mkdir -p $(PREFIX)/man ; fi
+	if ( test ! -d $(PREFIX)/man/man1 ) ; then mkdir -p $(PREFIX)/man/man1 ; fi
+	if ( test ! -d $(PREFIX)/include ) ; then mkdir -p $(PREFIX)/include ; fi
+	cp -f bzip2 $(PREFIX)/bin/bzip2
+	cp -f bzip2 $(PREFIX)/bin/bunzip2
+	cp -f bzip2 $(PREFIX)/bin/bzcat
+	cp -f bzip2recover $(PREFIX)/bin/bzip2recover
+	chmod a+x $(PREFIX)/bin/bzip2
+	chmod a+x $(PREFIX)/bin/bunzip2
+	chmod a+x $(PREFIX)/bin/bzcat
+	chmod a+x $(PREFIX)/bin/bzip2recover
+	cp -f bzip2.1 $(PREFIX)/man/man1
+	chmod a+r $(PREFIX)/man/man1/bzip2.1
+	cp -f bzlib.h $(PREFIX)/include
+	chmod a+r $(PREFIX)/include/bzlib.h
+	cp -f libbz2.a $(PREFIX)/lib
+	chmod a+r $(PREFIX)/lib/libbz2.a
+	cp -f bzgrep $(PREFIX)/bin/bzgrep
+	ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
+	ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
+	chmod a+x $(PREFIX)/bin/bzgrep
+	cp -f bzmore $(PREFIX)/bin/bzmore
+	ln -s -f $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
+	chmod a+x $(PREFIX)/bin/bzmore
+	cp -f bzdiff $(PREFIX)/bin/bzdiff
+	ln -s -f $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
+	chmod a+x $(PREFIX)/bin/bzdiff
+	cp -f bzgrep.1 bzmore.1 bzdiff.1 $(PREFIX)/man/man1
+	chmod a+r $(PREFIX)/man/man1/bzgrep.1
+	chmod a+r $(PREFIX)/man/man1/bzmore.1
+	chmod a+r $(PREFIX)/man/man1/bzdiff.1
+	echo ".so man1/bzgrep.1" > $(PREFIX)/man/man1/bzegrep.1
+	echo ".so man1/bzgrep.1" > $(PREFIX)/man/man1/bzfgrep.1
+	echo ".so man1/bzmore.1" > $(PREFIX)/man/man1/bzless.1
+	echo ".so man1/bzdiff.1" > $(PREFIX)/man/man1/bzcmp.1
+
+clean: 
+	rm -f *.o libbz2.a bzip2 bzip2recover \
+	sample1.rb2 sample2.rb2 sample3.rb2 \
+	sample1.tst sample2.tst sample3.tst
+
+blocksort.o: blocksort.c
+	@cat words0
+	$(CC) $(CFLAGS) -c blocksort.c
+huffman.o: huffman.c
+	$(CC) $(CFLAGS) -c huffman.c
+crctable.o: crctable.c
+	$(CC) $(CFLAGS) -c crctable.c
+randtable.o: randtable.c
+	$(CC) $(CFLAGS) -c randtable.c
+compress.o: compress.c
+	$(CC) $(CFLAGS) -c compress.c
+decompress.o: decompress.c
+	$(CC) $(CFLAGS) -c decompress.c
+bzlib.o: bzlib.c
+	$(CC) $(CFLAGS) -c bzlib.c
+bzip2.o: bzip2.c
+	$(CC) $(CFLAGS) -c bzip2.c
+bzip2recover.o: bzip2recover.c
+	$(CC) $(CFLAGS) -c bzip2recover.c
+
+
+distclean: clean
+	rm -f manual.ps manual.html manual.pdf
+
+DISTNAME=bzip2-1.0.8
+dist: check manual
+	rm -f $(DISTNAME)
+	ln -s -f . $(DISTNAME)
+	tar cvf $(DISTNAME).tar \
+	   $(DISTNAME)/blocksort.c \
+	   $(DISTNAME)/huffman.c \
+	   $(DISTNAME)/crctable.c \
+	   $(DISTNAME)/randtable.c \
+	   $(DISTNAME)/compress.c \
+	   $(DISTNAME)/decompress.c \
+	   $(DISTNAME)/bzlib.c \
+	   $(DISTNAME)/bzip2.c \
+	   $(DISTNAME)/bzip2recover.c \
+	   $(DISTNAME)/bzlib.h \
+	   $(DISTNAME)/bzlib_private.h \
+	   $(DISTNAME)/Makefile \
+	   $(DISTNAME)/LICENSE \
+	   $(DISTNAME)/bzip2.1 \
+	   $(DISTNAME)/bzip2.1.preformatted \
+	   $(DISTNAME)/bzip2.txt \
+	   $(DISTNAME)/words0 \
+	   $(DISTNAME)/words1 \
+	   $(DISTNAME)/words2 \
+	   $(DISTNAME)/words3 \
+	   $(DISTNAME)/sample1.ref \
+	   $(DISTNAME)/sample2.ref \
+	   $(DISTNAME)/sample3.ref \
+	   $(DISTNAME)/sample1.bz2 \
+	   $(DISTNAME)/sample2.bz2 \
+	   $(DISTNAME)/sample3.bz2 \
+	   $(DISTNAME)/dlltest.c \
+	   $(DISTNAME)/manual.html \
+	   $(DISTNAME)/manual.pdf \
+	   $(DISTNAME)/manual.ps \
+	   $(DISTNAME)/README \
+	   $(DISTNAME)/README.COMPILATION.PROBLEMS \
+	   $(DISTNAME)/README.XML.STUFF \
+	   $(DISTNAME)/CHANGES \
+	   $(DISTNAME)/libbz2.def \
+	   $(DISTNAME)/libbz2.dsp \
+	   $(DISTNAME)/dlltest.dsp \
+	   $(DISTNAME)/makefile.msc \
+	   $(DISTNAME)/unzcrash.c \
+	   $(DISTNAME)/spewG.c \
+	   $(DISTNAME)/mk251.c \
+	   $(DISTNAME)/bzdiff \
+	   $(DISTNAME)/bzdiff.1 \
+	   $(DISTNAME)/bzmore \
+	   $(DISTNAME)/bzmore.1 \
+	   $(DISTNAME)/bzgrep \
+	   $(DISTNAME)/bzgrep.1 \
+	   $(DISTNAME)/Makefile-libbz2_so \
+	   $(DISTNAME)/bz-common.xsl \
+	   $(DISTNAME)/bz-fo.xsl \
+	   $(DISTNAME)/bz-html.xsl \
+	   $(DISTNAME)/bzip.css \
+	   $(DISTNAME)/entities.xml \
+	   $(DISTNAME)/manual.xml \
+	   $(DISTNAME)/format.pl \

_service:tar_scm:bzip2-1.0.8.tar.gz/Makefile-libbz2_so Added

@@ -0,0 +1,59 @@
+
+# This Makefile builds a shared version of the library, 
+# libbz2.so.1.0.8, with soname libbz2.so.1.0,
+# at least on x86-Linux (RedHat 7.2), 
+# with gcc-2.96 20000731 (Red Hat Linux 7.1 2.96-98).  
+# Please see the README file for some important info 
+# about building the library like this.
+
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.8 of 13 July 2019
+# Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
+
+
+SHELL=/bin/sh
+CC=gcc
+BIGFILES=-D_FILE_OFFSET_BITS=64
+CFLAGS=-fpic -fPIC -Wall -Winline -O2 -g $(BIGFILES)
+
+OBJS= blocksort.o  \
+      huffman.o    \
+      crctable.o   \
+      randtable.o  \
+      compress.o   \
+      decompress.o \
+      bzlib.o
+
+all: $(OBJS)
+	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.8 $(OBJS)
+	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
+	rm -f libbz2.so.1.0
+	ln -s libbz2.so.1.0.8 libbz2.so.1.0
+
+clean: 
+	rm -f $(OBJS) bzip2.o libbz2.so.1.0.8 libbz2.so.1.0 bzip2-shared
+
+blocksort.o: blocksort.c
+	$(CC) $(CFLAGS) -c blocksort.c
+huffman.o: huffman.c
+	$(CC) $(CFLAGS) -c huffman.c
+crctable.o: crctable.c
+	$(CC) $(CFLAGS) -c crctable.c
+randtable.o: randtable.c
+	$(CC) $(CFLAGS) -c randtable.c
+compress.o: compress.c
+	$(CC) $(CFLAGS) -c compress.c
+decompress.o: decompress.c
+	$(CC) $(CFLAGS) -c decompress.c
+bzlib.o: bzlib.c
+	$(CC) $(CFLAGS) -c bzlib.c

_service:tar_scm:bzip2-1.0.8.tar.gz/README Added

@@ -0,0 +1,196 @@
+
+This is the README for bzip2/libzip2.
+This version is fully compatible with the previous public releases.
+
+------------------------------------------------------------------
+This file is part of bzip2/libbzip2, a program and library for
+lossless, block-sorting data compression.
+
+bzip2/libbzip2 version 1.0.8 of 13 July 2019
+Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+Please read the WARNING, DISCLAIMER and PATENTS sections in this file.
+
+This program is released under the terms of the license contained
+in the file LICENSE.
+------------------------------------------------------------------
+
+Complete documentation is available in Postscript form (manual.ps),
+PDF (manual.pdf) or html (manual.html).  A plain-text version of the
+manual page is available as bzip2.txt.
+
+
+HOW TO BUILD -- UNIX
+
+Type 'make'.  This builds the library libbz2.a and then the programs
+bzip2 and bzip2recover.  Six self-tests are run.  If the self-tests
+complete ok, carry on to installation:
+
+To install in /usr/local/bin, /usr/local/lib, /usr/local/man and
+/usr/local/include, type
+
+   make install
+
+To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type
+
+   make install PREFIX=/xxx/yyy
+
+If you are (justifiably) paranoid and want to see what 'make install'
+is going to do, you can first do
+
+   make -n install                      or
+   make -n install PREFIX=/xxx/yyy      respectively.
+
+The -n instructs make to show the commands it would execute, but not
+actually execute them.
+
+
+HOW TO BUILD -- UNIX, shared library libbz2.so.
+
+Do 'make -f Makefile-libbz2_so'.  This Makefile seems to work for
+Linux-ELF (RedHat 7.2 on an x86 box), with gcc.  I make no claims
+that it works for any other platform, though I suspect it probably
+will work for most platforms employing both ELF and gcc.
+
+bzip2-shared, a client of the shared library, is also built, but not
+self-tested.  So I suggest you also build using the normal Makefile,
+since that conducts a self-test.  A second reason to prefer the
+version statically linked to the library is that, on x86 platforms,
+building shared objects makes a valuable register (%ebx) unavailable
+to gcc, resulting in a slowdown of 10%-20%, at least for bzip2.
+
+Important note for people upgrading .so's from 0.9.0/0.9.5 to version
+1.0.X.  All the functions in the library have been renamed, from (eg)
+bzCompress to BZ2_bzCompress, to avoid namespace pollution.
+Unfortunately this means that the libbz2.so created by
+Makefile-libbz2_so will not work with any program which used an older
+version of the library.  I do encourage library clients to make the
+effort to upgrade to use version 1.0, since it is both faster and more
+robust than previous versions.
+
+
+HOW TO BUILD -- Windows 95, NT, DOS, Mac, etc.
+
+It's difficult for me to support compilation on all these platforms.
+My approach is to collect binaries for these platforms, and put them
+on the master web site (https://sourceware.org/bzip2/).  Look there.  However
+(FWIW), bzip2-1.0.X is very standard ANSI C and should compile
+unmodified with MS Visual C.  If you have difficulties building, you
+might want to read README.COMPILATION.PROBLEMS.
+
+At least using MS Visual C++ 6, you can build from the unmodified
+sources by issuing, in a command shell: 
+
+   nmake -f makefile.msc
+
+(you may need to first run the MSVC-provided script VCVARS32.BAT
+ so as to set up paths to the MSVC tools correctly).
+
+
+VALIDATION
+
+Correct operation, in the sense that a compressed file can always be
+decompressed to reproduce the original, is obviously of paramount
+importance.  To validate bzip2, I used a modified version of Mark
+Nelson's churn program.  Churn is an automated test driver which
+recursively traverses a directory structure, using bzip2 to compress
+and then decompress each file it encounters, and checking that the
+decompressed data is the same as the original.
+
+
+
+Please read and be aware of the following:
+
+WARNING:
+
+   This program and library (attempts to) compress data by 
+   performing several non-trivial transformations on it.  
+   Unless you are 100% familiar with *all* the algorithms 
+   contained herein, and with the consequences of modifying them, 
+   you should NOT meddle with the compression or decompression 
+   machinery.  Incorrect changes can and very likely *will* 
+   lead to disastrous loss of data.
+
+
+DISCLAIMER:
+
+   I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
+   USE OF THIS PROGRAM/LIBRARY, HOWSOEVER CAUSED.
+
+   Every compression of a file implies an assumption that the
+   compressed file can be decompressed to reproduce the original.
+   Great efforts in design, coding and testing have been made to
+   ensure that this program works correctly.  However, the complexity
+   of the algorithms, and, in particular, the presence of various
+   special cases in the code which occur with very low but non-zero
+   probability make it impossible to rule out the possibility of bugs
+   remaining in the program.  DO NOT COMPRESS ANY DATA WITH THIS
+   PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
+   SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
+
+   That is not to say this program is inherently unreliable.  
+   Indeed, I very much hope the opposite is true.  bzip2/libbzip2 
+   has been carefully constructed and extensively tested.
+
+
+PATENTS:
+
+   To the best of my knowledge, bzip2/libbzip2 does not use any 
+   patented algorithms.  However, I do not have the resources 
+   to carry out a patent search.  Therefore I cannot give any 
+   guarantee of the above statement.
+
+
+
+WHAT'S NEW IN 0.9.0 (as compared to 0.1pl2) ?
+
+   * Approx 10% faster compression, 30% faster decompression
+   * -t (test mode) is a lot quicker
+   * Can decompress concatenated compressed files
+   * Programming interface, so programs can directly read/write .bz2 files
+   * Less restrictive (BSD-style) licensing
+   * Flag handling more compatible with GNU gzip
+   * Much more documentation, i.e., a proper user manual
+   * Hopefully, improved portability (at least of the library)
+
+WHAT'S NEW IN 0.9.5 ?
+
+   * Compression speed is much less sensitive to the input
+     data than in previous versions.  Specifically, the very
+     slow performance caused by repetitive data is fixed.
+   * Many small improvements in file and flag handling.
+   * A Y2K statement.
+
+WHAT'S NEW IN 1.0.x ?
+
+   See the CHANGES file.
+
+I hope you find bzip2 useful.  Feel free to contact the developers at
+   bzip2-devel@sourceware.org
+if you have any suggestions or queries.  Many people mailed me with
+comments, suggestions and patches after the releases of bzip-0.15,
+bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
+1.0.2 and 1.0.3, and the changes in bzip2 are largely a result of this
+feedback.  I thank you for your comments.
+
+bzip2's "home" is https://sourceware.org/bzip2/
+
+Julian Seward
+jseward@acm.org
+Cambridge, UK.
+
+18     July 1996 (version 0.15)
+25   August 1996 (version 0.21)
+ 7   August 1997 (bzip2, version 0.1)
+29   August 1997 (bzip2, version 0.1pl2)
+23   August 1998 (bzip2, version 0.9.0)
+ 8     June 1999 (bzip2, version 0.9.5)
+ 4     Sept 1999 (bzip2, version 0.9.5d)
+ 5      May 2000 (bzip2, version 1.0pre8)
+30 December 2001 (bzip2, version 1.0.2pre1)
+15 February 2005 (bzip2, version 1.0.3)
+20 December 2006 (bzip2, version 1.0.4)
+10 December 2007 (bzip2, version 1.0.5)
+ 6     Sept 2010 (bzip2, version 1.0.6)
+27     June 2019 (bzip2, version 1.0.7)
+13     July 2019 (bzip2, version 1.0.8)

_service:tar_scm:bzip2-1.0.8.tar.gz/README.COMPILATION.PROBLEMS Added

@@ -0,0 +1,58 @@
+------------------------------------------------------------------
+This file is part of bzip2/libbzip2, a program and library for
+lossless, block-sorting data compression.
+
+bzip2/libbzip2 version 1.0.8 of 13 July 2019
+Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+README file.
+
+This program is released under the terms of the license contained
+in the file LICENSE.
+------------------------------------------------------------------
+
+bzip2 should compile without problems on the vast majority of
+platforms.  Using the supplied Makefile, I've built and tested it
+myself for x86-linux and amd64-linux.  With makefile.msc, Visual C++
+6.0 and nmake, you can build a native Win32 version too.  Large file
+support seems to work correctly on at least on amd64-linux.
+
+When I say "large file" I mean a file of size 2,147,483,648 (2^31)
+bytes or above.  Many older OSs can't handle files above this size,
+but many newer ones can.  Large files are pretty huge -- most files
+you'll encounter are not Large Files.
+
+Early versions of bzip2 (0.1, 0.9.0, 0.9.5) compiled on a wide variety
+of platforms without difficulty, and I hope this version will continue
+in that tradition.  However, in order to support large files, I've had
+to include the define -D_FILE_OFFSET_BITS=64 in the Makefile.  This
+can cause problems.
+
+The technique of adding -D_FILE_OFFSET_BITS=64 to get large file
+support is, as far as I know, the Recommended Way to get correct large
+file support.  For more details, see the Large File Support
+Specification, published by the Large File Summit, at
+
+   http://ftp.sas.com/standards/large.file
+
+As a general comment, if you get compilation errors which you think
+are related to large file support, try removing the above define from
+the Makefile, ie, delete the line
+
+   BIGFILES=-D_FILE_OFFSET_BITS=64 
+
+from the Makefile, and do 'make clean ; make'.  This will give you a
+version of bzip2 without large file support, which, for most
+applications, is probably not a problem.  
+
+Alternatively, try some of the platform-specific hints listed below.
+
+You can use the spewG.c program to generate huge files to test bzip2's
+large file support, if you are feeling paranoid.  Be aware though that
+any compilation problems which affect bzip2 will also affect spewG.c,
+alas.
+
+AIX: I have reports that for large file support, you need to specify
+-D_LARGE_FILES rather than -D_FILE_OFFSET_BITS=64.  I have not tested
+this myself.

_service:tar_scm:bzip2-1.0.8.tar.gz/README.XML.STUFF Added

@@ -0,0 +1,45 @@
+  ----------------------------------------------------------------
+  This file is part of bzip2/libbzip2, a program and library for
+  lossless, block-sorting data compression.
+
+  bzip2/libbzip2 version 1.0.8 of 13 July 2019
+  Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+  Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+  README file.
+
+  This program is released under the terms of the license contained
+  in the file LICENSE.
+  ----------------------------------------------------------------
+
+The script xmlproc.sh takes an xml file as input,
+and processes it to create .pdf, .html or .ps output.
+It uses format.pl, a perl script to format <pre> blocks nicely,
+ and add CDATA tags so writers do not have to use eg. &lt; 
+
+The file "entities.xml" must be edited to reflect current
+version, year, etc.
+
+
+Usage:
+
+  ./xmlproc.sh -v manual.xml
+  Validates an xml file to ensure no dtd-compliance errors
+
+  ./xmlproc.sh -html manual.xml
+  Output: manual.html
+
+  ./xmlproc.sh -pdf manual.xml
+  Output: manual.pdf
+
+  ./xmlproc.sh -ps manual.xml
+  Output: manual.ps
+
+
+Notum bene: 
+- pdfxmltex barfs if given a filename with an underscore in it
+
+- xmltex won't work yet - there's a bug in passivetex
+    which we are all waiting for Sebastian to fix.
+  So we are going the xml -> pdf -> ps route for the time being,
+    using pdfxmltex.

_service:tar_scm:bzip2-1.0.8.tar.gz/blocksort.c Added

@@ -0,0 +1,1094 @@
+
+/*-------------------------------------------------------------*/
+/*--- Block sorting machinery                               ---*/
+/*---                                           blocksort.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*---------------------------------------------*/
+/*--- Fallback O(N log(N)^2) sorting        ---*/
+/*--- algorithm, for repetitive blocks      ---*/
+/*---------------------------------------------*/
+
+/*---------------------------------------------*/
+static 
+__inline__
+void fallbackSimpleSort ( UInt32* fmap, 
+                          UInt32* eclass, 
+                          Int32   lo, 
+                          Int32   hi )
+{
+   Int32 i, j, tmp;
+   UInt32 ec_tmp;
+
+   if (lo == hi) return;
+
+   if (hi - lo > 3) {
+      for ( i = hi-4; i >= lo; i-- ) {
+         tmp = fmapi;
+         ec_tmp = eclasstmp;
+         for ( j = i+4; j <= hi && ec_tmp > eclassfmapj; j += 4 )
+            fmapj-4 = fmapj;
+         fmapj-4 = tmp;
+      }
+   }
+
+   for ( i = hi-1; i >= lo; i-- ) {
+      tmp = fmapi;
+      ec_tmp = eclasstmp;
+      for ( j = i+1; j <= hi && ec_tmp > eclassfmapj; j++ )
+         fmapj-1 = fmapj;
+      fmapj-1 = tmp;
+   }
+}
+
+
+/*---------------------------------------------*/
+#define fswap(zz1, zz2) \
+   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
+
+#define fvswap(zzp1, zzp2, zzn)       \
+{                                     \
+   Int32 yyp1 = (zzp1);               \
+   Int32 yyp2 = (zzp2);               \
+   Int32 yyn  = (zzn);                \
+   while (yyn > 0) {                  \
+      fswap(fmapyyp1, fmapyyp2);  \
+      yyp1++; yyp2++; yyn--;          \
+   }                                  \
+}
+
+
+#define fmin(a,b) ((a) < (b)) ? (a) : (b)
+
+#define fpush(lz,hz) { stackLosp = lz; \
+                       stackHisp = hz; \
+                       sp++; }
+
+#define fpop(lz,hz) { sp--;              \
+                      lz = stackLosp;  \
+                      hz = stackHisp; }
+
+#define FALLBACK_QSORT_SMALL_THRESH 10
+#define FALLBACK_QSORT_STACK_SIZE   100
+
+
+static
+void fallbackQSort3 ( UInt32* fmap, 
+                      UInt32* eclass,
+                      Int32   loSt, 
+                      Int32   hiSt )
+{
+   Int32 unLo, unHi, ltLo, gtHi, n, m;
+   Int32 sp, lo, hi;
+   UInt32 med, r, r3;
+   Int32 stackLoFALLBACK_QSORT_STACK_SIZE;
+   Int32 stackHiFALLBACK_QSORT_STACK_SIZE;
+
+   r = 0;
+
+   sp = 0;
+   fpush ( loSt, hiSt );
+
+   while (sp > 0) {
+
+      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE - 1, 1004 );
+
+      fpop ( lo, hi );
+      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
+         fallbackSimpleSort ( fmap, eclass, lo, hi );
+         continue;
+      }
+
+      /* Random partitioning.  Median of 3 sometimes fails to
+         avoid bad cases.  Median of 9 seems to help but 
+         looks rather expensive.  This too seems to work but
+         is cheaper.  Guidance for the magic constants 
+         7621 and 32768 is taken from Sedgewick's algorithms
+         book, chapter 35.
+      */
+      r = ((r * 7621) + 1) % 32768;
+      r3 = r % 3;
+      if (r3 == 0) med = eclassfmaplo; else
+      if (r3 == 1) med = eclassfmap(lo+hi)>>1; else
+                   med = eclassfmaphi;
+
+      unLo = ltLo = lo;
+      unHi = gtHi = hi;
+
+      while (1) {
+         while (1) {
+            if (unLo > unHi) break;
+            n = (Int32)eclassfmapunLo - (Int32)med;
+            if (n == 0) { 
+               fswap(fmapunLo, fmapltLo); 
+               ltLo++; unLo++; 
+               continue; 
+            };
+            if (n > 0) break;
+            unLo++;
+         }
+         while (1) {
+            if (unLo > unHi) break;
+            n = (Int32)eclassfmapunHi - (Int32)med;
+            if (n == 0) { 
+               fswap(fmapunHi, fmapgtHi); 
+               gtHi--; unHi--; 
+               continue; 
+            };
+            if (n < 0) break;
+            unHi--;
+         }
+         if (unLo > unHi) break;
+         fswap(fmapunLo, fmapunHi); unLo++; unHi--;
+      }
+
+      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
+
+      if (gtHi < ltLo) continue;
+
+      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
+      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
+
+      n = lo + unLo - ltLo - 1;
+      m = hi - (gtHi - unHi) + 1;
+
+      if (n - lo > hi - m) {
+         fpush ( lo, n );
+         fpush ( m, hi );
+      } else {
+         fpush ( m, hi );
+         fpush ( lo, n );
+      }
+   }
+}
+
+#undef fmin
+#undef fpush
+#undef fpop
+#undef fswap
+#undef fvswap
+#undef FALLBACK_QSORT_SMALL_THRESH
+#undef FALLBACK_QSORT_STACK_SIZE
+
+
+/*---------------------------------------------*/
+/* Pre:
+      nblock > 0
+      eclass exists for 0 .. nblock-1
+      ((UChar*)eclass) 0 .. nblock-1 holds block
+      ptr exists for 0 .. nblock-1
+
+   Post:
+      ((UChar*)eclass) 0 .. nblock-1 holds block

_service:tar_scm:bzip2-1.0.8.tar.gz/bz-common.xsl Added

@@ -0,0 +1,39 @@
+<?xml version="1.0"?> 
+<xsl:stylesheet 
+     xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
+
+
+<xsl:param name="section.autolabel" select="'1'"/> 
+<xsl:param name="section.label.includes.component.label" select="'1'"/>
+
+
+<xsl:param name="local.l10n.xml" select="document('')"/> 
+<l:i18n xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0"> 
+  <l:l10n language="en"> 
+    <l:context name="title-numbered">
+      <l:template name="chapter" text="%n.&#160;%t"/>
+    </l:context> 
+  </l:l10n>
+</l:i18n>
+
+
+<xsl:param name="generate.toc">
+set       toc,title
+book      toc,title,figure,table,example,equation
+chapter   toc,title
+section   toc
+sect1     toc
+sect2     toc
+sect3     toc
+sect4     nop
+sect5     nop
+qandaset  toc
+qandadiv  nop
+appendix  toc,title
+article/appendix  nop
+article   toc,title
+preface   toc,title
+reference toc,title
+</xsl:param>
+
+</xsl:stylesheet>

_service:tar_scm:bzip2-1.0.8.tar.gz/bz-fo.xsl Added

@@ -0,0 +1,276 @@
+<?xml version="1.0" encoding="UTF-8"?> 
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" 
+     xmlns:fo="http://www.w3.org/1999/XSL/Format" version="1.0">
+
+<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/fo/docbook.xsl"/>
+<xsl:import href="bz-common.xsl"/>
+
+
+<xsl:output method="xml" indent="yes"/>
+
+
+<xsl:param name="stylesheet.result.type" select="'fo'"/>
+
+<xsl:param name="use.extensions" select="'1'"/>
+<xsl:param name="xep.extensions" select="0"/>      
+<xsl:param name="fop.extensions" select="0"/>     
+<xsl:param name="saxon.extensions" select="0"/>   
+<xsl:param name="passivetex.extensions" select="1"/>
+<xsl:param name="tablecolumns.extension" select="'1'"/>
+
+
+<xsl:param name="double.sided" select="'0'"/> 
+
+
+<xsl:param name="insert.xref.page.number" select="1"/>
+
+
+<xsl:template match="processing-instruction('custom-pagebreak')">
+  <fo:block break-before='page'/>
+</xsl:template>
+
+
+<xsl:attribute-set name="xref.properties">
+  <xsl:attribute name="color">blue</xsl:attribute>
+</xsl:attribute-set>
+
+
+<xsl:template match="programlisting | screen">
+  <fo:block start-indent="0.25in" wrap-option="no-wrap" 
+            white-space-collapse="false" text-align="start" 
+            font-family="monospace" background-color="#f2f2f9"
+            linefeed-treatment="preserve" 
+            xsl:use-attribute-sets="normal.para.spacing">
+    <xsl:apply-templates/>
+  </fo:block>
+</xsl:template>
+
+<xsl:template match="literallayout">
+  <fo:block start-indent="0.25in" wrap-option="no-wrap" 
+            white-space-collapse="false" text-align="start" 
+            font-family="monospace" background-color="#edf7f4"
+            linefeed-treatment="preserve" 
+            space-before="0em" space-after="0em">
+    <xsl:apply-templates/>
+  </fo:block>
+</xsl:template>
+
+
+<xsl:template match="itemizedlist/listitem">
+  <xsl:variable name="id">
+  <xsl:call-template name="object.id"/></xsl:variable>
+  <xsl:variable name="itemsymbol">
+    <xsl:call-template name="list.itemsymbol">
+      <xsl:with-param name="node" select="parent::itemizedlist"/>
+    </xsl:call-template>
+  </xsl:variable>
+  <xsl:variable name="item.contents">
+    <fo:list-item-label end-indent="label-end()">
+      <fo:block>
+        <xsl:choose>
+          <xsl:when test="$itemsymbol='disc'">&#x2022;</xsl:when>
+          <xsl:when test="$itemsymbol='bullet'">&#x2022;</xsl:when>
+          <xsl:otherwise>&#x2022;</xsl:otherwise>
+        </xsl:choose>
+      </fo:block>
+    </fo:list-item-label>
+    <fo:list-item-body start-indent="body-start()">
+      <xsl:apply-templates/>    
+    </fo:list-item-body>
+  </xsl:variable>
+  <xsl:choose>
+    <xsl:when test="parent::*/@spacing = 'compact'">
+      <fo:list-item id="{$id}" 
+          xsl:use-attribute-sets="compact.list.item.spacing">
+        <xsl:copy-of select="$item.contents"/>
+      </fo:list-item>
+    </xsl:when>
+    <xsl:otherwise>
+      <fo:list-item id="{$id}" xsl:use-attribute-sets="list.item.spacing">
+        <xsl:copy-of select="$item.contents"/>
+      </fo:list-item>
+    </xsl:otherwise>
+  </xsl:choose>
+</xsl:template>
+
+
+<xsl:template match="orderedlist/listitem">
+  <xsl:variable name="id">
+  <xsl:call-template name="object.id"/></xsl:variable>
+  <xsl:variable name="item.contents">
+    <fo:list-item-label end-indent="label-end()">
+      <fo:block>
+        <xsl:apply-templates select="." mode="item-number"/>
+      </fo:block>
+    </fo:list-item-label>
+    <fo:list-item-body start-indent="body-start()">
+      <xsl:apply-templates/>    
+    </fo:list-item-body>
+  </xsl:variable>
+  <xsl:choose>
+    <xsl:when test="parent::*/@spacing = 'compact'">
+      <fo:list-item id="{$id}" 
+          xsl:use-attribute-sets="compact.list.item.spacing">
+        <xsl:copy-of select="$item.contents"/>
+      </fo:list-item>
+    </xsl:when>
+    <xsl:otherwise>
+      <fo:list-item id="{$id}" xsl:use-attribute-sets="list.item.spacing">
+        <xsl:copy-of select="$item.contents"/>
+      </fo:list-item>
+    </xsl:otherwise>
+  </xsl:choose>
+</xsl:template>
+
+
+<xsl:param name="variablelist.as.blocks" select="1"/>
+<xsl:template match="varlistentry" mode="vl.as.blocks">
+  <xsl:variable name="id">
+    <xsl:call-template name="object.id"/></xsl:variable>
+  <fo:block id="{$id}" xsl:use-attribute-sets="list.item.spacing"  
+      keep-together.within-column="always" 
+      keep-with-next.within-column="always">
+    <xsl:apply-templates select="term"/>
+  </fo:block>
+  <fo:block start-indent="0.5in" end-indent="0in" 
+            space-after.minimum="0.2em" 
+            space-after.optimum="0.4em" 
+            space-after.maximum="0.6em">
+    <fo:block>
+      <xsl:apply-templates select="listitem"/>
+    </fo:block>
+  </fo:block>
+</xsl:template>
+
+
+
+<xsl:template name="footer.table">
+  <xsl:param name="pageclass" select="''"/>
+  <xsl:param name="sequence" select="''"/>
+  <xsl:param name="gentext-key" select="''"/>
+  <xsl:choose>
+    <xsl:when test="$pageclass = 'index'">
+      <xsl:attribute name="margin-left">0pt</xsl:attribute>
+    </xsl:when>
+  </xsl:choose>
+  <xsl:variable name="candidate">
+    <fo:table table-layout="fixed" width="100%">
+      <fo:table-column column-number="1" column-width="80%"/>
+      <fo:table-column column-number="2" column-width="20%"/>
+      <fo:table-body>
+        <fo:table-row height="14pt">
+          <fo:table-cell text-align="left" display-align="after">
+            <xsl:attribute name="relative-align">baseline</xsl:attribute>
+            <fo:block> 
+              <fo:block> </fo:block>
+            </fo:block>
+          </fo:table-cell>
+          <fo:table-cell text-align="center" display-align="after">
+            <xsl:attribute name="relative-align">baseline</xsl:attribute>
+            <fo:block>
+              <xsl:call-template name="footer.content">
+                <xsl:with-param name="pageclass" select="$pageclass"/>
+                <xsl:with-param name="sequence" select="$sequence"/>
+                <xsl:with-param name="position" select="'center'"/>
+                <xsl:with-param name="gentext-key" select="$gentext-key"/>
+              </xsl:call-template>
+            </fo:block>
+          </fo:table-cell>
+        </fo:table-row>
+      </fo:table-body>
+    </fo:table>
+  </xsl:variable>
+  
+  <xsl:choose>
+    <xsl:when test="$pageclass='titlepage' and $gentext-key='book'
+                    and $sequence='first'">
+      
+    </xsl:when>
+    <xsl:when test="$sequence = 'blank' and $footers.on.blank.pages = 0">
+      
+    </xsl:when>
+    <xsl:otherwise>
+      <xsl:copy-of select="$candidate"/>
+    </xsl:otherwise>
+  </xsl:choose>
+</xsl:template>
+
+
+

_service:tar_scm:bzip2-1.0.8.tar.gz/bz-html.xsl Added

_service:tar_scm:bzip2-1.0.8.tar.gz/bzdiff Added

@@ -0,0 +1,76 @@
+#!/bin/sh
+# sh is buggy on RS/6000 AIX 3.2. Replace above line with #!/bin/ksh
+
+# Bzcmp/diff wrapped for bzip2, 
+# adapted from zdiff by Philippe Troin <phil@fifi.org> for Debian GNU/Linux.
+
+# Bzcmp and bzdiff are used to invoke the cmp or the  diff  pro-
+# gram  on compressed files.  All options specified are passed
+# directly to cmp or diff.  If only 1 file is specified,  then
+# the  files  compared  are file1 and an uncompressed file1.gz.
+# If two files are specified, then they are  uncompressed  (if
+# necessary) and fed to cmp or diff.  The exit status from cmp
+# or diff is preserved.
+
+PATH="/usr/bin:/bin:$PATH"; export PATH
+prog=`echo $0 | sed 's|.*/||'`
+case "$prog" in
+  *cmp) comp=${CMP-cmp}   ;;
+  *)    comp=${DIFF-diff} ;;
+esac
+
+OPTIONS=
+FILES=
+for ARG
+do
+    case "$ARG" in
+    -*)	OPTIONS="$OPTIONS $ARG";;
+     *)	if test -f "$ARG"; then
+            FILES="$FILES $ARG"
+        else
+            echo "${prog}: $ARG not found or not a regular file"
+	    exit 1
+        fi ;;
+    esac
+done
+if test -z "$FILES"; then
+	echo "Usage: $prog ${comp}_options file file"
+	exit 1
+fi
+set $FILES
+if test $# -eq 1; then
+	FILE=`echo "$1" | sed 's/.bz2$//'`
+	bzip2 -cd "$FILE.bz2" | $comp $OPTIONS - "$FILE"
+	STAT="$?"
+
+elif test $# -eq 2; then
+	case "$1" in
+        *.bz2)
+                case "$2" in
+	        *.bz2)
+			F=`echo "$2" | sed 's|.*/||;s|.bz2$||'`
+			tmp=`mktemp "${TMPDIR:-/tmp}"/bzdiff.XXXXXXXXXX` || {
+			      echo 'cannot create a temporary file' >&2
+			      exit 1
+			}
+                        bzip2 -cdfq "$2" > "$tmp"
+                        bzip2 -cdfq "$1" | $comp $OPTIONS - "$tmp"
+                        STAT="$?"
+			/bin/rm -f "$tmp";;
+
+                *)      bzip2 -cdfq "$1" | $comp $OPTIONS - "$2"
+                        STAT="$?";;
+                esac;;
+        *)      case "$2" in
+	        *.bz2)
+                        bzip2 -cdfq "$2" | $comp $OPTIONS "$1" -
+                        STAT="$?";;
+                *)      $comp $OPTIONS "$1" "$2"
+                        STAT="$?";;
+                esac;;
+	esac
+else
+	echo "Usage: $prog ${comp}_options file file"
+	exit 1
+fi
+exit "$STAT"

_service:tar_scm:bzip2-1.0.8.tar.gz/bzdiff.1 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/bzgrep Added

@@ -0,0 +1,85 @@
+#!/bin/sh
+
+# Bzgrep wrapped for bzip2, 
+# adapted from zgrep by Philippe Troin <phil@fifi.org> for Debian GNU/Linux.
+## zgrep notice:
+## zgrep -- a wrapper around a grep program that decompresses files as needed
+## Adapted from a version sent by Charles Levert <charles@comm.polymtl.ca>
+
+PATH="/usr/bin:$PATH"; export PATH
+
+prog=`echo $0 | sed 's|.*/||'`
+case "$prog" in
+	*egrep)	grep=${EGREP-egrep}	;;
+	*fgrep)	grep=${FGREP-fgrep}	;;
+	*)	grep=${GREP-grep}	;;
+esac
+pat=""
+while test $# -ne 0; do
+  case "$1" in
+  -e | -f) opt="$opt $1"; shift; pat="$1"
+           if test "$grep" = grep; then  # grep is buggy with -e on SVR4
+             grep=egrep
+           fi;;
+  -A | -B) opt="$opt $1 $2"; shift;;
+  -*)	   opt="$opt $1";;
+   *)      if test -z "$pat"; then
+	     pat="$1"
+	   else
+	     break;
+           fi;;
+  esac
+  shift
+done
+
+if test -z "$pat"; then
+  echo "grep through bzip2 files"
+  echo "usage: $prog grep_options pattern files"
+  exit 1
+fi
+
+list=0
+silent=0
+op=`echo "$opt" | sed -e 's/ //g' -e 's/-//g'`
+case "$op" in
+  *l*) list=1
+esac
+case "$op" in
+  *h*) silent=1
+esac
+
+if test $# -eq 0; then
+  bzip2 -cdfq | $grep $opt "$pat"
+  exit $?
+fi
+
+res=0
+for i do
+  if test -f "$i"; then :; else if test -f "$i.bz2"; then i="$i.bz2"; fi; fi
+  if test $list -eq 1; then
+    bzip2 -cdfq "$i" | $grep $opt "$pat" 2>&1 > /dev/null && echo $i
+    r=$?
+  elif test $# -eq 1 -o $silent -eq 1; then
+    bzip2 -cdfq "$i" | $grep $opt "$pat"
+    r=$?
+  else
+    j=$(echo "$i" | sed 's/\\/&&/g;s/|/\\&/g;s/&/\\&/g')
+    j=`printf "%s" "$j" | tr '\n' ' '`
+    # A trick adapted from
+    # https://groups.google.com/forum/#!original/comp.unix.shell/x1345iu10eg/Nn1n-1r1uU0J
+    # that has the same effect as the following bash code:
+    # bzip2 -cdfq "$i" | $grep $opt "$pat" | sed "s|^|${j}:|"
+    # r=${PIPESTATUS1}
+    exec 3>&1
+    eval `
+      exec 4>&1 >&3 3>&-
+      {
+        bzip2 -cdfq "$i" 4>&-
+      } | {
+        $grep $opt "$pat" 4>&-; echo "r=$?;" >&4
+      } | sed "s|^|${j}:|"
+    `
+  fi
+  test "$r" -ne 0 && res="$r"
+done
+exit $res

_service:tar_scm:bzip2-1.0.8.tar.gz/bzgrep.1 Added

@@ -0,0 +1,56 @@
+\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
+\"for Debian GNU/Linux
+.TH BZGREP 1
+.SH NAME
+bzgrep, bzfgrep, bzegrep \- search possibly bzip2 compressed files for a regular expression
+.SH SYNOPSIS
+.B bzgrep
+ grep_options 
+.BI  \ -e\  " pattern"
+.IR filename ".\|.\|."
+.br
+.B bzegrep
+ egrep_options 
+.BI  \ -e\  " pattern"
+.IR filename ".\|.\|."
+.br
+.B bzfgrep
+ fgrep_options 
+.BI  \ -e\  " pattern"
+.IR filename ".\|.\|."
+.SH DESCRIPTION
+.IR  Bzgrep
+is used to invoke the
+.I grep
+on bzip2-compressed files. All options specified are passed directly to
+.I grep.
+If no file is specified, then the standard input is decompressed
+if necessary and fed to grep.
+Otherwise the given files are uncompressed if necessary and fed to
+.I grep.
+.PP
+If
+.I bzgrep
+is invoked as
+.I bzegrep
+or
+.I bzfgrep
+then
+.I egrep
+or
+.I fgrep
+is used instead of
+.I grep.
+If the GREP environment variable is set,
+.I bzgrep
+uses it as the
+.I grep
+program to be invoked. For example:
+
+    for sh:  GREP=fgrep  bzgrep string files
+    for csh: (setenv GREP fgrep; bzgrep string files)
+.SH AUTHOR
+Charles Levert (charles@comm.polymtl.ca). Adapted to bzip2 by Philippe
+Troin <phil@fifi.org> for Debian GNU/Linux.
+.SH "SEE ALSO"
+grep(1), egrep(1), fgrep(1), bzdiff(1), bzmore(1), bzless(1), bzip2(1)

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip.css Added

@@ -0,0 +1,74 @@
+/* Colours:
+#74240f  dark brown      h1, h2, h3, h4
+#336699  medium blue     links
+#339999  turquoise       link hover colour
+#202020  almost black    general text
+#761596  purple          md5sum text
+#626262  dark gray       pre border
+#eeeeee  very light gray pre background
+#f2f2f9  very light blue nav table background
+#3366cc  medium blue     nav table border
+*/
+
+a, a:link, a:visited, a:active { color: #336699; }
+a:hover { color: #339999; }
+
+body { font: 80%/126% sans-serif; }
+h1, h2, h3, h4 { color: #74240f; }
+
+dt { color: #336699; font-weight: bold }
+dd { 
+ margin-left: 1.5em; 
+ padding-bottom: 0.8em;
+}
+
+/* -- ruler -- */
+div.hr_blue { 
+  height:  3px; 
+  background:#ffffff url("../images/hr_blue.png") repeat-x; }
+div.hr_blue hr { display:none; }
+
+/* release styles */
+#release p { margin-top: 0.4em; }
+#release .md5sum { color: #761596; }
+
+
+/* ------ styles for docs|manuals|howto ------ */
+/* -- lists -- */
+ul  { 
+ margin:     0px 4px 16px 16px;
+ padding:    0px;
+ list-style: url("../images/li-blue.png"); 
+}
+ul li { 
+ margin-bottom: 10px;
+}
+ul ul	{ 
+ list-style-type:  none; 
+ list-style-image: none; 
+ margin-left:      0px; 
+}
+
+/* header / footer nav tables */
+table.nav {
+ border:     solid 1px #3366cc;
+ background: #f2f2f9;
+ background-color: #f2f2f9;
+ margin-bottom: 0.5em;
+}
+/* don't have underlined links in chunked nav menus */
+table.nav a { text-decoration: none; }
+table.nav a:hover { text-decoration: underline; }
+table.nav td { font-size: 85%; }
+
+code, tt, pre { font-size: 120%; }
+code, tt { color: #761596; }
+
+div.literallayout, pre.programlisting, pre.screen {
+ color:      #000000;
+ padding:    0.5em;
+ background: #eeeeee;
+ border:     1px solid #626262;
+ background-color: #eeeeee;
+ margin: 4px 0px 4px 0px; 
+}

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip2.1 Added

@@ -0,0 +1,454 @@
+.PU
+.TH bzip2 1
+.SH NAME
+bzip2, bunzip2 \- a block-sorting file compressor, v1.0.8
+.br
+bzcat \- decompresses files to stdout
+.br
+bzip2recover \- recovers data from damaged bzip2 files
+
+.SH SYNOPSIS
+.ll +8
+.B bzip2
+.RB  " \-cdfkqstvzVL123456789 " 
+
+.I "filenames \&..."
+
+.ll -8
+.br
+.B bunzip2
+.RB  " \-fkvsVL " 
+ 
+.I "filenames \&..."
+
+.br
+.B bzcat
+.RB  " \-s " 
+ 
+.I "filenames \&..."
+
+.br
+.B bzip2recover
+.I "filename"
+
+.SH DESCRIPTION
+.I bzip2
+compresses files using the Burrows-Wheeler block sorting
+text compression algorithm, and Huffman coding.  Compression is
+generally considerably better than that achieved by more conventional
+LZ77/LZ78-based compressors, and approaches the performance of the PPM
+family of statistical compressors.
+
+The command-line options are deliberately very similar to 
+those of 
+.I GNU gzip, 
+but they are not identical.
+
+.I bzip2
+expects a list of file names to accompany the
+command-line flags.  Each file is replaced by a compressed version of
+itself, with the name "original_name.bz2".  
+Each compressed file
+has the same modification date, permissions, and, when possible,
+ownership as the corresponding original, so that these properties can
+be correctly restored at decompression time.  File name handling is
+naive in the sense that there is no mechanism for preserving original
+file names, permissions, ownerships or dates in filesystems which lack
+these concepts, or have serious file name length restrictions, such as
+MS-DOS.
+
+.I bzip2
+and
+.I bunzip2
+will by default not overwrite existing
+files.  If you want this to happen, specify the \-f flag.
+
+If no file names are specified,
+.I bzip2
+compresses from standard
+input to standard output.  In this case,
+.I bzip2
+will decline to
+write compressed output to a terminal, as this would be entirely
+incomprehensible and therefore pointless.
+
+.I bunzip2
+(or
+.I bzip2 \-d) 
+decompresses all
+specified files.  Files which were not created by 
+.I bzip2
+will be detected and ignored, and a warning issued.  
+.I bzip2
+attempts to guess the filename for the decompressed file 
+from that of the compressed file as follows:
+
+       filename.bz2    becomes   filename
+       filename.bz     becomes   filename
+       filename.tbz2   becomes   filename.tar
+       filename.tbz    becomes   filename.tar
+       anyothername    becomes   anyothername.out
+
+If the file does not end in one of the recognised endings, 
+.I .bz2, 
+.I .bz, 
+.I .tbz2
+or
+.I .tbz, 
+.I bzip2 
+complains that it cannot
+guess the name of the original file, and uses the original name
+with
+.I .out
+appended.
+
+As with compression, supplying no
+filenames causes decompression from 
+standard input to standard output.
+
+.I bunzip2 
+will correctly decompress a file which is the
+concatenation of two or more compressed files.  The result is the
+concatenation of the corresponding uncompressed files.  Integrity
+testing (\-t) 
+of concatenated 
+compressed files is also supported.
+
+You can also compress or decompress files to the standard output by
+giving the \-c flag.  Multiple files may be compressed and
+decompressed like this.  The resulting outputs are fed sequentially to
+stdout.  Compression of multiple files 
+in this manner generates a stream
+containing multiple compressed file representations.  Such a stream
+can be decompressed correctly only by
+.I bzip2 
+version 0.9.0 or
+later.  Earlier versions of
+.I bzip2
+will stop after decompressing
+the first file in the stream.
+
+.I bzcat
+(or
+.I bzip2 -dc) 
+decompresses all specified files to
+the standard output.
+
+.I bzip2
+will read arguments from the environment variables
+.I BZIP2
+and
+.I BZIP,
+in that order, and will process them
+before any arguments read from the command line.  This gives a 
+convenient way to supply default arguments.
+
+Compression is always performed, even if the compressed 
+file is slightly
+larger than the original.  Files of less than about one hundred bytes
+tend to get larger, since the compression mechanism has a constant
+overhead in the region of 50 bytes.  Random data (including the output
+of most file compressors) is coded at about 8.05 bits per byte, giving
+an expansion of around 0.5%.
+
+As a self-check for your protection, 
+.I 
+bzip2
+uses 32-bit CRCs to
+make sure that the decompressed version of a file is identical to the
+original.  This guards against corruption of the compressed data, and
+against undetected bugs in
+.I bzip2
+(hopefully very unlikely).  The
+chances of data corruption going undetected is microscopic, about one
+chance in four billion for each file processed.  Be aware, though, that
+the check occurs upon decompression, so it can only tell you that
+something is wrong.  It can't help you 
+recover the original uncompressed
+data.  You can use 
+.I bzip2recover
+to try to recover data from
+damaged files.
+
+Return values: 0 for a normal exit, 1 for environmental problems (file
+not found, invalid flags, I/O errors, &c), 2 to indicate a corrupt
+compressed file, 3 for an internal consistency error (eg, bug) which
+caused
+.I bzip2
+to panic.
+
+.SH OPTIONS
+.TP
+.B \-c --stdout
+Compress or decompress to standard output.
+.TP
+.B \-d --decompress
+Force decompression.  
+.I bzip2, 
+.I bunzip2 
+and
+.I bzcat 
+are
+really the same program, and the decision about what actions to take is
+done on the basis of which name is used.  This flag overrides that
+mechanism, and forces 
+.I bzip2
+to decompress.
+.TP
+.B \-z --compress
+The complement to \-d: forces compression, regardless of the

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip2.1.preformatted Added

@@ -0,0 +1,399 @@
+bzip2(1)                                                 bzip2(1)
+
+
+
+N&#x8;NA&#x8;AM&#x8;ME&#x8;E
+       bzip2, bunzip2 − a block‐sorting file compressor, v1.0.8
+       bzcat − decompresses files to stdout
+       bzip2recover − recovers data from damaged bzip2 files
+
+
+S&#x8;SY&#x8;YN&#x8;NO&#x8;OP&#x8;PS&#x8;SI&#x8;IS&#x8;S
+       b&#x8;bz&#x8;zi&#x8;ip&#x8;p2&#x8;2  −&#x8;−c&#x8;cd&#x8;df&#x8;fk&#x8;kq&#x8;qs&#x8;st&#x8;tv&#x8;vz&#x8;zV&#x8;VL&#x8;L1&#x8;12&#x8;23&#x8;34&#x8;45&#x8;56&#x8;67&#x8;78&#x8;89&#x8;9   _&#x8;f_&#x8;i_&#x8;l_&#x8;e_&#x8;n_&#x8;a_&#x8;m_&#x8;e_&#x8;s _&#x8;._&#x8;._&#x8;.  
+       b&#x8;bu&#x8;un&#x8;nz&#x8;zi&#x8;ip&#x8;p2&#x8;2  −&#x8;−f&#x8;fk&#x8;kv&#x8;vs&#x8;sV&#x8;VL&#x8;L   _&#x8;f_&#x8;i_&#x8;l_&#x8;e_&#x8;n_&#x8;a_&#x8;m_&#x8;e_&#x8;s _&#x8;._&#x8;._&#x8;.  
+       b&#x8;bz&#x8;zc&#x8;ca&#x8;at&#x8;t  −&#x8;−s&#x8;s   _&#x8;f_&#x8;i_&#x8;l_&#x8;e_&#x8;n_&#x8;a_&#x8;m_&#x8;e_&#x8;s _&#x8;._&#x8;._&#x8;.  
+       b&#x8;bz&#x8;zi&#x8;ip&#x8;p2&#x8;2r&#x8;re&#x8;ec&#x8;co&#x8;ov&#x8;ve&#x8;er&#x8;r _&#x8;f_&#x8;i_&#x8;l_&#x8;e_&#x8;n_&#x8;a_&#x8;m_&#x8;e
+
+
+D&#x8;DE&#x8;ES&#x8;SC&#x8;CR&#x8;RI&#x8;IP&#x8;PT&#x8;TI&#x8;IO&#x8;ON&#x8;N
+       _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  compresses  files  using  the Burrows‐Wheeler block
+       sorting text compression algorithm,  and  Huffman  coding.
+       Compression  is  generally  considerably  better than that
+       achieved by more conventional LZ77/LZ78‐based compressors,
+       and  approaches  the performance of the PPM family of sta
+       tistical compressors.
+
+       The command‐line options are deliberately very similar  to
+       those of _&#x8;G_&#x8;N_&#x8;U _&#x8;g_&#x8;z_&#x8;i_&#x8;p_&#x8;, but they are not identical.
+
+       _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  expects  a list of file names to accompany the com
+       mand‐line flags.  Each file is replaced  by  a  compressed
+       version  of  itself,  with  the  name "original_name.bz2".
+       Each compressed file has the same modification date,  per
+       missions, and, when possible, ownership as the correspond
+       ing original, so that these properties  can  be  correctly
+       restored  at  decompression  time.   File name handling is
+       naive in the sense that there is no mechanism for preserv
+       ing  original file names, permissions, ownerships or dates
+       in filesystems which lack these concepts, or have  serious
+       file name length restrictions, such as MS‐DOS.
+
+       _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  and  _&#x8;b_&#x8;u_&#x8;n_&#x8;z_&#x8;i_&#x8;p_&#x8;2 will by default not overwrite existing
+       files.  If you want this to happen, specify the −f flag.
+
+       If no file names  are  specified,  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  compresses  from
+       standard  input  to  standard output.  In this case, _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2
+       will decline to write compressed output to a terminal,  as
+       this  would  be  entirely  incomprehensible  and therefore
+       pointless.
+
+       _&#x8;b_&#x8;u_&#x8;n_&#x8;z_&#x8;i_&#x8;p_&#x8;2 (or _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 _&#x8;−_&#x8;d_&#x8;) decompresses  all  specified  files.
+       Files which were not created by _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 will be detected and
+       ignored, and a warning issued.  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  attempts  to  guess
+       the  filename  for  the decompressed file from that of the
+       compressed file as follows:
+
+              filename.bz2    becomes   filename
+              filename.bz     becomes   filename
+              filename.tbz2   becomes   filename.tar
+              filename.tbz    becomes   filename.tar
+              anyothername    becomes   anyothername.out
+
+       If the file does not end in one of the recognised endings,
+       _&#x8;._&#x8;b_&#x8;z_&#x8;2_&#x8;,  _&#x8;._&#x8;b_&#x8;z_&#x8;,  _&#x8;._&#x8;t_&#x8;b_&#x8;z_&#x8;2 or _&#x8;._&#x8;t_&#x8;b_&#x8;z_&#x8;, _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 complains that it cannot
+       guess the name of the original file, and uses the original
+       name with _&#x8;._&#x8;o_&#x8;u_&#x8;t appended.
+
+       As  with compression, supplying no filenames causes decom
+       pression from standard input to standard output.
+
+       _&#x8;b_&#x8;u_&#x8;n_&#x8;z_&#x8;i_&#x8;p_&#x8;2 will correctly decompress a file which is the con
+       catenation of two or more compressed files.  The result is
+       the concatenation of the corresponding uncompressed files.
+       Integrity testing (−t) of concatenated compressed files is
+       also supported.
+
+       You can also compress or decompress files to the  standard
+       output  by giving the −c flag.  Multiple files may be com
+       pressed and decompressed like this.  The resulting outputs
+       are  fed  sequentially to stdout.  Compression of multiple
+       files in this manner generates a stream containing  multi
+       ple compressed file representations.  Such a stream can be
+       decompressed correctly only  by  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  version  0.9.0  or
+       later.   Earlier  versions of _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 will stop after decom
+       pressing the first file in the stream.
+
+       _&#x8;b_&#x8;z_&#x8;c_&#x8;a_&#x8;t (or _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 _&#x8;‐_&#x8;d_&#x8;c_&#x8;) decompresses all specified  files  to
+       the standard output.
+
+       _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  will  read arguments from the environment variables
+       _&#x8;B_&#x8;Z_&#x8;I_&#x8;P_&#x8;2 and _&#x8;B_&#x8;Z_&#x8;I_&#x8;P_&#x8;, in  that  order,  and  will  process  them
+       before  any  arguments  read  from the command line.  This
+       gives a convenient way to supply default arguments.
+
+       Compression is always performed, even  if  the  compressed
+       file  is slightly larger than the original.  Files of less
+       than about one hundred bytes tend to get larger, since the
+       compression  mechanism  has  a  constant  overhead  in the
+       region of 50 bytes.  Random data (including the output  of
+       most  file  compressors)  is  coded at about 8.05 bits per
+       byte, giving an expansion of around 0.5%.
+
+       As a self‐check for your  protection,  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2  uses  32‐bit
+       CRCs  to make sure that the decompressed version of a file
+       is identical to the original.  This guards against corrup
+       tion  of  the compressed data, and against undetected bugs
+       in _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 (hopefully very unlikely).  The chances  of  data
+       corruption  going  undetected  is  microscopic,  about one
+       chance in four billion for each file processed.  Be aware,
+       though,  that  the  check occurs upon decompression, so it
+       can only tell you that something is wrong.  It can’t  help
+       you  recover  the original uncompressed data.  You can use
+       _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2_&#x8;r_&#x8;e_&#x8;c_&#x8;o_&#x8;v_&#x8;e_&#x8;r to try to recover data from damaged files.
+
+       Return values: 0 for a normal exit,  1  for  environmental
+       problems  (file not found, invalid flags, I/O errors, &c),
+       2 to indicate a corrupt compressed file, 3 for an internal
+       consistency error (eg, bug) which caused _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 to panic.
+
+
+O&#x8;OP&#x8;PT&#x8;TI&#x8;IO&#x8;ON&#x8;NS&#x8;S
+       −&#x8;−c&#x8;c ‐&#x8;‐‐&#x8;‐s&#x8;st&#x8;td&#x8;do&#x8;ou&#x8;ut&#x8;t
+              Compress or decompress to standard output.
+
+       −&#x8;−d&#x8;d ‐&#x8;‐‐&#x8;‐d&#x8;de&#x8;ec&#x8;co&#x8;om&#x8;mp&#x8;pr&#x8;re&#x8;es&#x8;ss&#x8;s
+              Force  decompression.  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2_&#x8;, _&#x8;b_&#x8;u_&#x8;n_&#x8;z_&#x8;i_&#x8;p_&#x8;2 and _&#x8;b_&#x8;z_&#x8;c_&#x8;a_&#x8;t are
+              really the same program,  and  the  decision  about
+              what  actions to take is done on the basis of which
+              name is used.  This flag overrides that  mechanism,
+              and forces _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 to decompress.
+
+       −&#x8;−z&#x8;z ‐&#x8;‐‐&#x8;‐c&#x8;co&#x8;om&#x8;mp&#x8;pr&#x8;re&#x8;es&#x8;ss&#x8;s
+              The   complement   to   −d:   forces   compression,
+              regardless of the invocation name.
+
+       −&#x8;−t&#x8;t ‐&#x8;‐‐&#x8;‐t&#x8;te&#x8;es&#x8;st&#x8;t
+              Check integrity of the specified file(s), but don’t
+              decompress  them.   This  really  performs  a trial
+              decompression and throws away the result.
+
+       −&#x8;−f&#x8;f ‐&#x8;‐‐&#x8;‐f&#x8;fo&#x8;or&#x8;rc&#x8;ce&#x8;e
+              Force overwrite of output files.   Normally,  _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2
+              will  not  overwrite  existing  output files.  Also
+              forces _&#x8;b_&#x8;z_&#x8;i_&#x8;p_&#x8;2 to break hard links to files, which it
+              otherwise wouldn’t do.
+
+              bzip2  normally  declines to decompress files which
+              don’t have the  correct  magic  header  bytes.   If
+              forced  (‐f),  however,  it  will  pass  such files
+              through unmodified.  This is how GNU gzip  behaves.
+
+       −&#x8;−k&#x8;k ‐&#x8;‐‐&#x8;‐k&#x8;ke&#x8;ee&#x8;ep&#x8;p
+              Keep  (don’t delete) input files during compression
+              or decompression.
+
+       −&#x8;−s&#x8;s ‐&#x8;‐‐&#x8;‐s&#x8;sm&#x8;ma&#x8;al&#x8;ll&#x8;l
+              Reduce memory usage, for compression, decompression
+              and  testing.   Files  are  decompressed and tested
+              using a modified algorithm which only requires  2.5
+              bytes  per  block byte.  This means any file can be
+              decompressed in 2300k of memory,  albeit  at  about
+              half the normal speed.
+
+              During  compression,  −s  selects  a  block size of
+              200k, which limits memory use to  around  the  same
+              figure,  at  the expense of your compression ratio.
+              In short, if your  machine  is  low  on  memory  (8
+              megabytes  or  less),  use  −s for everything.  See
+              MEMORY MANAGEMENT below.
+
+       −&#x8;−q&#x8;q ‐&#x8;‐‐&#x8;‐q&#x8;qu&#x8;ui&#x8;ie&#x8;et&#x8;t
+              Suppress non‐essential warning messages.   Messages
+              pertaining  to I/O errors and other critical events
+              will not be suppressed.
+
+       −&#x8;−v&#x8;v ‐&#x8;‐‐&#x8;‐v&#x8;ve&#x8;er&#x8;rb&#x8;bo&#x8;os&#x8;se&#x8;e
+              Verbose mode ‐‐ show the compression ratio for each
+              file  processed.   Further  −v’s  increase the ver
+              bosity level, spewing out lots of information which
+              is primarily of interest for diagnostic purposes.
+
+       −&#x8;−L&#x8;L ‐&#x8;‐‐&#x8;‐l&#x8;li&#x8;ic&#x8;ce&#x8;en&#x8;ns&#x8;se&#x8;e ‐&#x8;‐V&#x8;V ‐&#x8;‐‐&#x8;‐v&#x8;ve&#x8;er&#x8;rs&#x8;si&#x8;io&#x8;on&#x8;n
+              Display  the  software  version,  license terms and
+              conditions.
+
+       −&#x8;−1&#x8;1 (&#x8;(o&#x8;or&#x8;r −&#x8;−−&#x8;−f&#x8;fa&#x8;as&#x8;st&#x8;t)&#x8;) t&#x8;to&#x8;o −&#x8;−9&#x8;9 (&#x8;(o&#x8;or&#x8;r −&#x8;−−&#x8;−b&#x8;be&#x8;es&#x8;st&#x8;t)&#x8;)
+              Set the block size to 100 k, 200 k ..  900  k  when
+              compressing.   Has  no  effect  when decompressing.
+              See MEMORY MANAGEMENT below.  The −−fast and −−best
+              aliases  are  primarily for GNU gzip compatibility.
+              In particular, −−fast doesn’t make things  signifi
+              cantly  faster.   And  −−best  merely  selects  the
+              default behaviour.
+
+       −&#x8;−‐&#x8;‐     Treats all subsequent arguments as file names, even
+              if they start with a dash.  This is so you can han
+              dle files with names beginning  with  a  dash,  for
+              example: bzip2 −‐ −myfilename.
+
+       −&#x8;−‐&#x8;‐r&#x8;re&#x8;ep&#x8;pe&#x8;et&#x8;ti&#x8;it&#x8;ti&#x8;iv&#x8;ve&#x8;e‐&#x8;‐f&#x8;fa&#x8;as&#x8;st&#x8;t ‐&#x8;‐‐&#x8;‐r&#x8;re&#x8;ep&#x8;pe&#x8;et&#x8;ti&#x8;it&#x8;ti&#x8;iv&#x8;ve&#x8;e‐&#x8;‐b&#x8;be&#x8;es&#x8;st&#x8;t

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip2.c Added

@@ -0,0 +1,2036 @@
+
+/*-----------------------------------------------------------*/
+/*--- A block-sorting, lossless compressor        bzip2.c ---*/
+/*-----------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+/* Place a 1 beside your platform, and 0 elsewhere.
+   Generic 32-bit Unix.
+   Also works on 64-bit Unix boxes.
+   This is the default.
+*/
+#define BZ_UNIX      1
+
+/*--
+  Win32, as seen by Jacob Navia's excellent
+  port of (Chris Fraser & David Hanson)'s excellent
+  lcc compiler.  Or with MS Visual C.
+  This is selected automatically if compiled by a compiler which
+  defines _WIN32, not including the Cygwin GCC.
+--*/
+#define BZ_LCCWIN32  0
+
+#if defined(_WIN32) && !defined(__CYGWIN__)
+#undef  BZ_LCCWIN32
+#define BZ_LCCWIN32 1
+#undef  BZ_UNIX
+#define BZ_UNIX 0
+#endif
+
+
+/*---------------------------------------------*/
+/*--
+  Some stuff for all platforms.
+--*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <signal.h>
+#include <math.h>
+#include <errno.h>
+#include <ctype.h>
+#include "bzlib.h"
+
+#define ERROR_IF_EOF(i)       { if ((i) == EOF)  ioError(); }
+#define ERROR_IF_NOT_ZERO(i)  { if ((i) != 0)    ioError(); }
+#define ERROR_IF_MINUS_ONE(i) { if ((i) == (-1)) ioError(); }
+
+
+/*---------------------------------------------*/
+/*--
+   Platform-specific stuff.
+--*/
+
+#if BZ_UNIX
+#   include <fcntl.h>
+#   include <sys/types.h>
+#   include <utime.h>
+#   include <unistd.h>
+#   include <sys/stat.h>
+#   include <sys/times.h>
+
+#   define PATH_SEP    '/'
+#   define MY_LSTAT    lstat
+#   define MY_STAT     stat
+#   define MY_S_ISREG  S_ISREG
+#   define MY_S_ISDIR  S_ISDIR
+
+#   define APPEND_FILESPEC(root, name) \
+      root=snocString((root), (name))
+
+#   define APPEND_FLAG(root, name) \
+      root=snocString((root), (name))
+
+#   define SET_BINARY_MODE(fd) /**/
+
+#   ifdef __GNUC__
+#      define NORETURN __attribute__ ((noreturn))
+#   else
+#      define NORETURN /**/
+#   endif
+
+#   ifdef __DJGPP__
+#     include <io.h>
+#     include <fcntl.h>
+#     undef MY_LSTAT
+#     undef MY_STAT
+#     define MY_LSTAT stat
+#     define MY_STAT stat
+#     undef SET_BINARY_MODE
+#     define SET_BINARY_MODE(fd)                        \
+        do {                                            \
+           int retVal = setmode ( fileno ( fd ),        \
+                                  O_BINARY );           \
+           ERROR_IF_MINUS_ONE ( retVal );               \
+        } while ( 0 )
+#   endif
+
+#   ifdef __CYGWIN__
+#     include <io.h>
+#     include <fcntl.h>
+#     undef SET_BINARY_MODE
+#     define SET_BINARY_MODE(fd)                        \
+        do {                                            \
+           int retVal = setmode ( fileno ( fd ),        \
+                                  O_BINARY );           \
+           ERROR_IF_MINUS_ONE ( retVal );               \
+        } while ( 0 )
+#   endif
+#endif /* BZ_UNIX */
+
+
+
+#if BZ_LCCWIN32
+#   include <io.h>
+#   include <fcntl.h>
+#   include <sys/stat.h>
+
+#   define NORETURN       /**/
+#   define PATH_SEP       '\\'
+#   define MY_LSTAT       _stati64
+#   define MY_STAT        _stati64
+#   define MY_S_ISREG(x)  ((x) & _S_IFREG)
+#   define MY_S_ISDIR(x)  ((x) & _S_IFDIR)
+
+#   define APPEND_FLAG(root, name) \
+      root=snocString((root), (name))
+
+#   define APPEND_FILESPEC(root, name)                \
+      root = snocString ((root), (name))
+
+#   define SET_BINARY_MODE(fd)                        \
+      do {                                            \
+         int retVal = setmode ( fileno ( fd ),        \
+                                O_BINARY );           \
+         ERROR_IF_MINUS_ONE ( retVal );               \
+      } while ( 0 )
+
+#endif /* BZ_LCCWIN32 */
+
+
+/*---------------------------------------------*/
+/*--
+  Some more stuff for all platforms :-)
+--*/
+
+typedef char            Char;
+typedef unsigned char   Bool;
+typedef unsigned char   UChar;
+typedef int             Int32;
+typedef unsigned int    UInt32;
+typedef short           Int16;
+typedef unsigned short  UInt16;
+                                       
+#define True  ((Bool)1)
+#define False ((Bool)0)
+
+/*--
+  IntNative is your platform's `native' int size.
+  Only here to avoid probs with 64-bit platforms.
+--*/
+typedef int IntNative;
+
+
+/*---------------------------------------------------*/
+/*--- Misc (file handling) data decls             ---*/
+/*---------------------------------------------------*/
+
+Int32   verbosity;
+Bool    keepInputFiles, smallMode, deleteOutputOnInterrupt;
+Bool    forceOverwrite, testFailsExist, unzFailsExist, noisy;
+Int32   numFileNames, numFilesProcessed, blockSize100k;
+Int32   exitValue;
+
+/*-- source modes; F==file, I==stdin, O==stdout --*/
+#define SM_I2O           1
+#define SM_F2O           2
+#define SM_F2F           3
+
+/*-- operation modes --*/
+#define OM_Z             1
+#define OM_UNZ           2
+#define OM_TEST          3
+
+Int32   opMode;

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip2.txt Added

@@ -0,0 +1,391 @@
+
+NAME
+       bzip2, bunzip2 - a block-sorting file compressor, v1.0.8
+       bzcat - decompresses files to stdout
+       bzip2recover - recovers data from damaged bzip2 files
+
+
+SYNOPSIS
+       bzip2  -cdfkqstvzVL123456789   filenames ...  
+       bunzip2  -fkvsVL   filenames ...  
+       bzcat  -s   filenames ...  
+       bzip2recover filename
+
+
+DESCRIPTION
+       bzip2  compresses  files  using  the Burrows-Wheeler block
+       sorting text compression algorithm,  and  Huffman  coding.
+       Compression  is  generally  considerably  better than that
+       achieved by more conventional LZ77/LZ78-based compressors,
+       and  approaches  the performance of the PPM family of sta-
+       tistical compressors.
+
+       The command-line options are deliberately very similar  to
+       those of GNU gzip, but they are not identical.
+
+       bzip2  expects  a list of file names to accompany the com-
+       mand-line flags.  Each file is replaced  by  a  compressed
+       version  of  itself,  with  the  name "original_name.bz2".
+       Each compressed file has the same modification date,  per-
+       missions, and, when possible, ownership as the correspond-
+       ing original, so that these properties  can  be  correctly
+       restored  at  decompression  time.   File name handling is
+       naive in the sense that there is no mechanism for preserv-
+       ing  original file names, permissions, ownerships or dates
+       in filesystems which lack these concepts, or have  serious
+       file name length restrictions, such as MS-DOS.
+
+       bzip2  and  bunzip2 will by default not overwrite existing
+       files.  If you want this to happen, specify the -f flag.
+
+       If no file names  are  specified,  bzip2  compresses  from
+       standard  input  to  standard output.  In this case, bzip2
+       will decline to write compressed output to a terminal,  as
+       this  would  be  entirely  incomprehensible  and therefore
+       pointless.
+
+       bunzip2 (or bzip2 -d) decompresses  all  specified  files.
+       Files which were not created by bzip2 will be detected and
+       ignored, and a warning issued.  bzip2  attempts  to  guess
+       the  filename  for  the decompressed file from that of the
+       compressed file as follows:
+
+              filename.bz2    becomes   filename
+              filename.bz     becomes   filename
+              filename.tbz2   becomes   filename.tar
+              filename.tbz    becomes   filename.tar
+              anyothername    becomes   anyothername.out
+
+       If the file does not end in one of the recognised endings,
+       .bz2,  .bz,  .tbz2 or .tbz, bzip2 complains that it cannot
+       guess the name of the original file, and uses the original
+       name with .out appended.
+
+       As  with compression, supplying no filenames causes decom-
+       pression from standard input to standard output.
+
+       bunzip2 will correctly decompress a file which is the con-
+       catenation of two or more compressed files.  The result is
+       the concatenation of the corresponding uncompressed files.
+       Integrity testing (-t) of concatenated compressed files is
+       also supported.
+
+       You can also compress or decompress files to the  standard
+       output  by giving the -c flag.  Multiple files may be com-
+       pressed and decompressed like this.  The resulting outputs
+       are  fed  sequentially to stdout.  Compression of multiple
+       files in this manner generates a stream containing  multi-
+       ple compressed file representations.  Such a stream can be
+       decompressed correctly only  by  bzip2  version  0.9.0  or
+       later.   Earlier  versions of bzip2 will stop after decom-
+       pressing the first file in the stream.
+
+       bzcat (or bzip2 -dc) decompresses all specified  files  to
+       the standard output.
+
+       bzip2  will  read arguments from the environment variables
+       BZIP2 and BZIP, in  that  order,  and  will  process  them
+       before  any  arguments  read  from the command line.  This
+       gives a convenient way to supply default arguments.
+
+       Compression is always performed, even  if  the  compressed
+       file  is slightly larger than the original.  Files of less
+       than about one hundred bytes tend to get larger, since the
+       compression  mechanism  has  a  constant  overhead  in the
+       region of 50 bytes.  Random data (including the output  of
+       most  file  compressors)  is  coded at about 8.05 bits per
+       byte, giving an expansion of around 0.5%.
+
+       As a self-check for your  protection,  bzip2  uses  32-bit
+       CRCs  to make sure that the decompressed version of a file
+       is identical to the original.  This guards against corrup-
+       tion  of  the compressed data, and against undetected bugs
+       in bzip2 (hopefully very unlikely).  The chances  of  data
+       corruption  going  undetected  is  microscopic,  about one
+       chance in four billion for each file processed.  Be aware,
+       though,  that  the  check occurs upon decompression, so it
+       can only tell you that something is wrong.  It can't  help
+       you  recover  the original uncompressed data.  You can use
+       bzip2recover to try to recover data from damaged files.
+
+       Return values: 0 for a normal exit,  1  for  environmental
+       problems  (file not found, invalid flags, I/O errors, &c),
+       2 to indicate a corrupt compressed file, 3 for an internal
+       consistency error (eg, bug) which caused bzip2 to panic.
+
+
+OPTIONS
+       -c --stdout
+              Compress or decompress to standard output.
+
+       -d --decompress
+              Force  decompression.  bzip2, bunzip2 and bzcat are
+              really the same program,  and  the  decision  about
+              what  actions to take is done on the basis of which
+              name is used.  This flag overrides that  mechanism,
+              and forces bzip2 to decompress.
+
+       -z --compress
+              The   complement   to   -d:   forces   compression,
+              regardless of the invocation name.
+
+       -t --test
+              Check integrity of the specified file(s), but don't
+              decompress  them.   This  really  performs  a trial
+              decompression and throws away the result.
+
+       -f --force
+              Force overwrite of output files.   Normally,  bzip2
+              will  not  overwrite  existing  output files.  Also
+              forces bzip2 to break hard links to files, which it
+              otherwise wouldn't do.
+
+              bzip2  normally  declines to decompress files which
+              don't have the  correct  magic  header  bytes.   If
+              forced  (-f),  however,  it  will  pass  such files
+              through unmodified.  This is how GNU gzip  behaves.
+
+       -k --keep
+              Keep  (don't delete) input files during compression
+              or decompression.
+
+       -s --small
+              Reduce memory usage, for compression, decompression
+              and  testing.   Files  are  decompressed and tested
+              using a modified algorithm which only requires  2.5
+              bytes  per  block byte.  This means any file can be
+              decompressed in 2300k of memory,  albeit  at  about
+              half the normal speed.
+
+              During  compression,  -s  selects  a  block size of
+              200k, which limits memory use to  around  the  same
+              figure,  at  the expense of your compression ratio.
+              In short, if your  machine  is  low  on  memory  (8
+              megabytes  or  less),  use  -s for everything.  See
+              MEMORY MANAGEMENT below.
+
+       -q --quiet
+              Suppress non-essential warning messages.   Messages
+              pertaining  to I/O errors and other critical events
+              will not be suppressed.
+
+       -v --verbose
+              Verbose mode -- show the compression ratio for each
+              file  processed.   Further  -v's  increase the ver-
+              bosity level, spewing out lots of information which
+              is primarily of interest for diagnostic purposes.
+
+       -L --license -V --version
+              Display  the  software  version,  license terms and
+              conditions.
+
+       -1 (or --fast) to -9 (or --best)
+              Set the block size to 100 k, 200 k ..  900  k  when
+              compressing.   Has  no  effect  when decompressing.
+              See MEMORY MANAGEMENT below.  The --fast and --best
+              aliases  are  primarily for GNU gzip compatibility.
+              In particular, --fast doesn't make things  signifi-
+              cantly  faster.   And  --best  merely  selects  the
+              default behaviour.
+
+       --     Treats all subsequent arguments as file names, even
+              if they start with a dash.  This is so you can han-
+              dle files with names beginning  with  a  dash,  for
+              example: bzip2 -- -myfilename.
+
+       --repetitive-fast --repetitive-best
+              These  flags  are  redundant  in versions 0.9.5 and
+              above.  They provided some coarse control over  the
+              behaviour  of the sorting algorithm in earlier ver-

_service:tar_scm:bzip2-1.0.8.tar.gz/bzip2recover.c Added

@@ -0,0 +1,516 @@
+/*-----------------------------------------------------------*/
+/*--- Block recoverer program for bzip2                   ---*/
+/*---                                      bzip2recover.c ---*/
+/*-----------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+/* This program is a complete hack and should be rewritten properly.
+	 It isn't very complicated. */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+
+
+/* This program records bit locations in the file to be recovered.
+   That means that if 64-bit ints are not supported, we will not
+   be able to recover .bz2 files over 512MB (2^32 bits) long.
+   On GNU supported platforms, we take advantage of the 64-bit
+   int support to circumvent this problem.  Ditto MSVC.
+
+   This change occurred in version 1.0.2; all prior versions have
+   the 512MB limitation.
+*/
+#ifdef __GNUC__
+   typedef  unsigned long long int  MaybeUInt64;
+#  define MaybeUInt64_FMT "%Lu"
+#else
+#ifdef _MSC_VER
+   typedef  unsigned __int64  MaybeUInt64;
+#  define MaybeUInt64_FMT "%I64u"
+#else
+   typedef  unsigned int   MaybeUInt64;
+#  define MaybeUInt64_FMT "%u"
+#endif
+#endif
+
+typedef  unsigned int   UInt32;
+typedef  int            Int32;
+typedef  unsigned char  UChar;
+typedef  char           Char;
+typedef  unsigned char  Bool;
+#define True    ((Bool)1)
+#define False   ((Bool)0)
+
+
+#define BZ_MAX_FILENAME 2000
+
+Char inFileNameBZ_MAX_FILENAME;
+Char outFileNameBZ_MAX_FILENAME;
+Char progNameBZ_MAX_FILENAME;
+
+MaybeUInt64 bytesOut = 0;
+MaybeUInt64 bytesIn  = 0;
+
+
+/*---------------------------------------------------*/
+/*--- Header bytes                                ---*/
+/*---------------------------------------------------*/
+
+#define BZ_HDR_B 0x42                         /* 'B' */
+#define BZ_HDR_Z 0x5a                         /* 'Z' */
+#define BZ_HDR_h 0x68                         /* 'h' */
+#define BZ_HDR_0 0x30                         /* '0' */
+ 
+
+/*---------------------------------------------------*/
+/*--- I/O errors                                  ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+static void readError ( void )
+{
+   fprintf ( stderr,
+             "%s: I/O error reading `%s', possible reason follows.\n",
+            progName, inFileName );
+   perror ( progName );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void writeError ( void )
+{
+   fprintf ( stderr,
+             "%s: I/O error reading `%s', possible reason follows.\n",
+            progName, inFileName );
+   perror ( progName );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void mallocFail ( Int32 n )
+{
+   fprintf ( stderr,
+             "%s: malloc failed on request for %d bytes.\n",
+            progName, n );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void tooManyBlocks ( Int32 max_handled_blocks )
+{
+   fprintf ( stderr,
+             "%s: `%s' appears to contain more than %d blocks\n",
+            progName, inFileName, max_handled_blocks );
+   fprintf ( stderr,
+             "%s: and cannot be handled.  To fix, increase\n",
+             progName );
+   fprintf ( stderr, 
+             "%s: BZ_MAX_HANDLED_BLOCKS in bzip2recover.c, and recompile.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+
+/*---------------------------------------------------*/
+/*--- Bit stream I/O                              ---*/
+/*---------------------------------------------------*/
+
+typedef
+   struct {
+      FILE*  handle;
+      Int32  buffer;
+      Int32  buffLive;
+      Char   mode;
+   }
+   BitStream;
+
+
+/*---------------------------------------------*/
+static BitStream* bsOpenReadStream ( FILE* stream )
+{
+   BitStream *bs = malloc ( sizeof(BitStream) );
+   if (bs == NULL) mallocFail ( sizeof(BitStream) );
+   bs->handle = stream;
+   bs->buffer = 0;
+   bs->buffLive = 0;
+   bs->mode = 'r';
+   return bs;
+}
+
+
+/*---------------------------------------------*/
+static BitStream* bsOpenWriteStream ( FILE* stream )
+{
+   BitStream *bs = malloc ( sizeof(BitStream) );
+   if (bs == NULL) mallocFail ( sizeof(BitStream) );
+   bs->handle = stream;
+   bs->buffer = 0;
+   bs->buffLive = 0;
+   bs->mode = 'w';
+   return bs;
+}
+
+
+/*---------------------------------------------*/
+static void bsPutBit ( BitStream* bs, Int32 bit )
+{
+   if (bs->buffLive == 8) {
+      Int32 retVal = putc ( (UChar) bs->buffer, bs->handle );
+      if (retVal == EOF) writeError();
+      bytesOut++;
+      bs->buffLive = 1;
+      bs->buffer = bit & 0x1;
+   } else {
+      bs->buffer = ( (bs->buffer << 1) | (bit & 0x1) );
+      bs->buffLive++;
+   };
+}
+
+
+/*---------------------------------------------*/
+/*--
+   Returns 0 or 1, or 2 to indicate EOF.
+--*/
+static Int32 bsGetBit ( BitStream* bs )

_service:tar_scm:bzip2-1.0.8.tar.gz/bzlib.c Added

@@ -0,0 +1,1572 @@
+
+/*-------------------------------------------------------------*/
+/*--- Library top-level functions.                          ---*/
+/*---                                               bzlib.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+/* CHANGES
+   0.9.0    -- original version.
+   0.9.0a/b -- no changes in this file.
+   0.9.0c   -- made zero-length BZ_FLUSH work correctly in bzCompress().
+     fixed bzWrite/bzRead to ignore zero-length requests.
+     fixed bzread to correctly handle read requests after EOF.
+     wrong parameter order in call to bzDecompressInit in
+     bzBuffToBuffDecompress.  Fixed.
+*/
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+/*--- Compression stuff                           ---*/
+/*---------------------------------------------------*/
+
+
+/*---------------------------------------------------*/
+#ifndef BZ_NO_STDIO
+void BZ2_bz__AssertH__fail ( int errcode )
+{
+   fprintf(stderr, 
+      "\n\nbzip2/libbzip2: internal error number %d.\n"
+      "This is a bug in bzip2/libbzip2, %s.\n"
+      "Please report it to: bzip2-devel@sourceware.org.  If this happened\n"
+      "when you were using some program which uses libbzip2 as a\n"
+      "component, you should also report this bug to the author(s)\n"
+      "of that program.  Please make an effort to report this bug;\n"
+      "timely and accurate bug reports eventually lead to higher\n"
+      "quality software.  Thanks.\n\n",
+      errcode,
+      BZ2_bzlibVersion()
+   );
+
+   if (errcode == 1007) {
+   fprintf(stderr,
+      "\n*** A special note about internal error number 1007 ***\n"
+      "\n"
+      "Experience suggests that a common cause of i.e. 1007\n"
+      "is unreliable memory or other hardware.  The 1007 assertion\n"
+      "just happens to cross-check the results of huge numbers of\n"
+      "memory reads/writes, and so acts (unintendedly) as a stress\n"
+      "test of your memory system.\n"
+      "\n"
+      "I suggest the following: try compressing the file again,\n"
+      "possibly monitoring progress in detail with the -vv flag.\n"
+      "\n"
+      "* If the error cannot be reproduced, and/or happens at different\n"
+      "  points in compression, you may have a flaky memory system.\n"
+      "  Try a memory-test program.  I have used Memtest86\n"
+      "  (www.memtest86.com).  At the time of writing it is free (GPLd).\n"
+      "  Memtest86 tests memory much more thorougly than your BIOSs\n"
+      "  power-on test, and may find failures that the BIOS doesn't.\n"
+      "\n"
+      "* If the error can be repeatably reproduced, this is a bug in\n"
+      "  bzip2, and I would very much like to hear about it.  Please\n"
+      "  let me know, and, ideally, save a copy of the file causing the\n"
+      "  problem -- without which I will be unable to investigate it.\n"
+      "\n"
+   );
+   }
+
+   exit(3);
+}
+#endif
+
+
+/*---------------------------------------------------*/
+static
+int bz_config_ok ( void )
+{
+   if (sizeof(int)   != 4) return 0;
+   if (sizeof(short) != 2) return 0;
+   if (sizeof(char)  != 1) return 0;
+   return 1;
+}
+
+
+/*---------------------------------------------------*/
+static
+void* default_bzalloc ( void* opaque, Int32 items, Int32 size )
+{
+   void* v = malloc ( items * size );
+   return v;
+}
+
+static
+void default_bzfree ( void* opaque, void* addr )
+{
+   if (addr != NULL) free ( addr );
+}
+
+
+/*---------------------------------------------------*/
+static
+void prepare_new_block ( EState* s )
+{
+   Int32 i;
+   s->nblock = 0;
+   s->numZ = 0;
+   s->state_out_pos = 0;
+   BZ_INITIALISE_CRC ( s->blockCRC );
+   for (i = 0; i < 256; i++) s->inUsei = False;
+   s->blockNo++;
+}
+
+
+/*---------------------------------------------------*/
+static
+void init_RL ( EState* s )
+{
+   s->state_in_ch  = 256;
+   s->state_in_len = 0;
+}
+
+
+static
+Bool isempty_RL ( EState* s )
+{
+   if (s->state_in_ch < 256 && s->state_in_len > 0)
+      return False; else
+      return True;
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzCompressInit) 
+                    ( bz_stream* strm, 
+                     int        blockSize100k,
+                     int        verbosity,
+                     int        workFactor )
+{
+   Int32   n;
+   EState* s;
+
+   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
+
+   if (strm == NULL || 
+       blockSize100k < 1 || blockSize100k > 9 ||
+       workFactor < 0 || workFactor > 250)
+     return BZ_PARAM_ERROR;
+
+   if (workFactor == 0) workFactor = 30;
+   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
+   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
+
+   s = BZALLOC( sizeof(EState) );
+   if (s == NULL) return BZ_MEM_ERROR;
+   s->strm = strm;
+
+   s->arr1 = NULL;
+   s->arr2 = NULL;
+   s->ftab = NULL;
+
+   n       = 100000 * blockSize100k;
+   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
+   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
+   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
+
+   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
+      if (s->arr1 != NULL) BZFREE(s->arr1);
+      if (s->arr2 != NULL) BZFREE(s->arr2);
+      if (s->ftab != NULL) BZFREE(s->ftab);
+      if (s       != NULL) BZFREE(s);
+      return BZ_MEM_ERROR;
+   }
+
+   s->blockNo           = 0;
+   s->state             = BZ_S_INPUT;
+   s->mode              = BZ_M_RUNNING;
+   s->combinedCRC       = 0;
+   s->blockSize100k     = blockSize100k;
+   s->nblockMAX         = 100000 * blockSize100k - 19;
+   s->verbosity         = verbosity;
+   s->workFactor        = workFactor;
+
+   s->block             = (UChar*)s->arr2;
+   s->mtfv              = (UInt16*)s->arr1;

_service:tar_scm:bzip2-1.0.8.tar.gz/bzlib.h Added

@@ -0,0 +1,282 @@
+
+/*-------------------------------------------------------------*/
+/*--- Public header file for the library.                   ---*/
+/*---                                               bzlib.h ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#ifndef _BZLIB_H
+#define _BZLIB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BZ_RUN               0
+#define BZ_FLUSH             1
+#define BZ_FINISH            2
+
+#define BZ_OK                0
+#define BZ_RUN_OK            1
+#define BZ_FLUSH_OK          2
+#define BZ_FINISH_OK         3
+#define BZ_STREAM_END        4
+#define BZ_SEQUENCE_ERROR    (-1)
+#define BZ_PARAM_ERROR       (-2)
+#define BZ_MEM_ERROR         (-3)
+#define BZ_DATA_ERROR        (-4)
+#define BZ_DATA_ERROR_MAGIC  (-5)
+#define BZ_IO_ERROR          (-6)
+#define BZ_UNEXPECTED_EOF    (-7)
+#define BZ_OUTBUFF_FULL      (-8)
+#define BZ_CONFIG_ERROR      (-9)
+
+typedef 
+   struct {
+      char *next_in;
+      unsigned int avail_in;
+      unsigned int total_in_lo32;
+      unsigned int total_in_hi32;
+
+      char *next_out;
+      unsigned int avail_out;
+      unsigned int total_out_lo32;
+      unsigned int total_out_hi32;
+
+      void *state;
+
+      void *(*bzalloc)(void *,int,int);
+      void (*bzfree)(void *,void *);
+      void *opaque;
+   } 
+   bz_stream;
+
+
+#ifndef BZ_IMPORT
+#define BZ_EXPORT
+#endif
+
+#ifndef BZ_NO_STDIO
+/* Need a definitition for FILE */
+#include <stdio.h>
+#endif
+
+#ifdef _WIN32
+#   include <windows.h>
+#   ifdef small
+      /* windows.h define small to char */
+#      undef small
+#   endif
+#   ifdef BZ_EXPORT
+#   define BZ_API(func) WINAPI func
+#   define BZ_EXTERN extern
+#   else
+   /* import windows dll dynamically */
+#   define BZ_API(func) (WINAPI * func)
+#   define BZ_EXTERN
+#   endif
+#else
+#   define BZ_API(func) func
+#   define BZ_EXTERN extern
+#endif
+
+
+/*-- Core (low-level) library functions --*/
+
+BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( 
+      bz_stream* strm, 
+      int        blockSize100k, 
+      int        verbosity, 
+      int        workFactor 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzCompress) ( 
+      bz_stream* strm, 
+      int action 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( 
+      bz_stream* strm 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( 
+      bz_stream *strm, 
+      int       verbosity, 
+      int       small
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( 
+      bz_stream* strm 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( 
+      bz_stream *strm 
+   );
+
+
+
+/*-- High(er) level library functions --*/
+
+#ifndef BZ_NO_STDIO
+#define BZ_MAX_UNUSED 5000
+
+typedef void BZFILE;
+
+BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( 
+      int*  bzerror,   
+      FILE* f, 
+      int   verbosity, 
+      int   small,
+      void* unused,    
+      int   nUnused 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( 
+      int*    bzerror, 
+      BZFILE* b 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void**  unused,  
+      int*    nUnused 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzRead) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void*   buf, 
+      int     len 
+   );
+
+BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( 
+      int*  bzerror,      
+      FILE* f, 
+      int   blockSize100k, 
+      int   verbosity, 
+      int   workFactor 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWrite) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void*   buf, 
+      int     len 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( 
+      int*          bzerror, 
+      BZFILE*       b, 
+      int           abandon, 
+      unsigned int* nbytes_in, 
+      unsigned int* nbytes_out 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( 
+      int*          bzerror, 
+      BZFILE*       b, 
+      int           abandon, 
+      unsigned int* nbytes_in_lo32, 
+      unsigned int* nbytes_in_hi32, 
+      unsigned int* nbytes_out_lo32, 
+      unsigned int* nbytes_out_hi32
+   );
+#endif

_service:tar_scm:bzip2-1.0.8.tar.gz/bzlib_private.h Added

@@ -0,0 +1,509 @@
+
+/*-------------------------------------------------------------*/
+/*--- Private header file for the library.                  ---*/
+/*---                                       bzlib_private.h ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#ifndef _BZLIB_PRIVATE_H
+#define _BZLIB_PRIVATE_H
+
+#include <stdlib.h>
+
+#ifndef BZ_NO_STDIO
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#endif
+
+#include "bzlib.h"
+
+
+
+/*-- General stuff. --*/
+
+#define BZ_VERSION  "1.0.8, 13-Jul-2019"
+
+typedef char            Char;
+typedef unsigned char   Bool;
+typedef unsigned char   UChar;
+typedef int             Int32;
+typedef unsigned int    UInt32;
+typedef short           Int16;
+typedef unsigned short  UInt16;
+
+#define True  ((Bool)1)
+#define False ((Bool)0)
+
+#ifndef __GNUC__
+#define __inline__  /* */
+#endif 
+
+#ifndef BZ_NO_STDIO
+
+extern void BZ2_bz__AssertH__fail ( int errcode );
+#define AssertH(cond,errcode) \
+   { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
+
+#if BZ_DEBUG
+#define AssertD(cond,msg) \
+   { if (!(cond)) {       \
+      fprintf ( stderr,   \
+        "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
+      exit(1); \
+   }}
+#else
+#define AssertD(cond,msg) /* */
+#endif
+
+#define VPrintf0(zf) \
+   fprintf(stderr,zf)
+#define VPrintf1(zf,za1) \
+   fprintf(stderr,zf,za1)
+#define VPrintf2(zf,za1,za2) \
+   fprintf(stderr,zf,za1,za2)
+#define VPrintf3(zf,za1,za2,za3) \
+   fprintf(stderr,zf,za1,za2,za3)
+#define VPrintf4(zf,za1,za2,za3,za4) \
+   fprintf(stderr,zf,za1,za2,za3,za4)
+#define VPrintf5(zf,za1,za2,za3,za4,za5) \
+   fprintf(stderr,zf,za1,za2,za3,za4,za5)
+
+#else
+
+extern void bz_internal_error ( int errcode );
+#define AssertH(cond,errcode) \
+   { if (!(cond)) bz_internal_error ( errcode ); }
+#define AssertD(cond,msg)                do { } while (0)
+#define VPrintf0(zf)                     do { } while (0)
+#define VPrintf1(zf,za1)                 do { } while (0)
+#define VPrintf2(zf,za1,za2)             do { } while (0)
+#define VPrintf3(zf,za1,za2,za3)         do { } while (0)
+#define VPrintf4(zf,za1,za2,za3,za4)     do { } while (0)
+#define VPrintf5(zf,za1,za2,za3,za4,za5) do { } while (0)
+
+#endif
+
+
+#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
+#define BZFREE(ppp)  (strm->bzfree)(strm->opaque,(ppp))
+
+
+/*-- Header bytes. --*/
+
+#define BZ_HDR_B 0x42   /* 'B' */
+#define BZ_HDR_Z 0x5a   /* 'Z' */
+#define BZ_HDR_h 0x68   /* 'h' */
+#define BZ_HDR_0 0x30   /* '0' */
+  
+/*-- Constants for the back end. --*/
+
+#define BZ_MAX_ALPHA_SIZE 258
+#define BZ_MAX_CODE_LEN    23
+
+#define BZ_RUNA 0
+#define BZ_RUNB 1
+
+#define BZ_N_GROUPS 6
+#define BZ_G_SIZE   50
+#define BZ_N_ITERS  4
+
+#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
+
+
+
+/*-- Stuff for randomising repetitive blocks. --*/
+
+extern Int32 BZ2_rNums512;
+
+#define BZ_RAND_DECLS                          \
+   Int32 rNToGo;                               \
+   Int32 rTPos                                 \
+
+#define BZ_RAND_INIT_MASK                      \
+   s->rNToGo = 0;                              \
+   s->rTPos  = 0                               \
+
+#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
+
+#define BZ_RAND_UPD_MASK                       \
+   if (s->rNToGo == 0) {                       \
+      s->rNToGo = BZ2_rNumss->rTPos;         \
+      s->rTPos++;                              \
+      if (s->rTPos == 512) s->rTPos = 0;       \
+   }                                           \
+   s->rNToGo--;
+
+
+
+/*-- Stuff for doing CRCs. --*/
+
+extern UInt32 BZ2_crc32Table256;
+
+#define BZ_INITIALISE_CRC(crcVar)              \
+{                                              \
+   crcVar = 0xffffffffL;                       \
+}
+
+#define BZ_FINALISE_CRC(crcVar)                \
+{                                              \
+   crcVar = ~(crcVar);                         \
+}
+
+#define BZ_UPDATE_CRC(crcVar,cha)              \
+{                                              \
+   crcVar = (crcVar << 8) ^                    \
+            BZ2_crc32Table(crcVar >> 24) ^    \
+                           ((UChar)cha);      \
+}
+
+
+
+/*-- States and modes for compression. --*/
+
+#define BZ_M_IDLE      1
+#define BZ_M_RUNNING   2
+#define BZ_M_FLUSHING  3
+#define BZ_M_FINISHING 4
+
+#define BZ_S_OUTPUT    1
+#define BZ_S_INPUT     2
+
+#define BZ_N_RADIX 2
+#define BZ_N_QSORT 12
+#define BZ_N_SHELL 18
+#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
+
+
+
+
+/*-- Structure holding all the compression-side stuff. --*/
+
+typedef
+   struct {
+      /* pointer back to the struct bz_stream */
+      bz_stream* strm;

_service:tar_scm:bzip2-1.0.8.tar.gz/bzmore Added

@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# Bzmore wrapped for bzip2, 
+# adapted from zmore by Philippe Troin <phil@fifi.org> for Debian GNU/Linux.
+
+PATH="/usr/bin:$PATH"; export PATH
+
+prog=`echo $0 | sed 's|.*/||'`
+case "$prog" in
+	*less)	more=less	;;
+	*)	more=more       ;;
+esac
+
+if test "`echo -n a`" = "-n a"; then
+  # looks like a SysV system:
+  n1=''; n2='\c'
+else
+  n1='-n'; n2=''
+fi
+oldtty=`stty -g 2>/dev/null`
+if stty -cbreak 2>/dev/null; then
+  cb='cbreak'; ncb='-cbreak'
+else
+  # 'stty min 1' resets eof to ^a on both SunOS and SysV!
+  cb='min 1 -icanon'; ncb='icanon eof ^d'
+fi
+if test $? -eq 0 -a -n "$oldtty"; then
+   trap 'stty $oldtty 2>/dev/null; exit' 0 2 3 5 10 13 15
+else
+   trap 'stty $ncb echo 2>/dev/null; exit' 0 2 3 5 10 13 15
+fi
+
+if test $# = 0; then
+    if test -t 0; then
+	echo usage: $prog files...
+    else
+	bzip2 -cdfq | eval $more
+    fi
+else
+    FIRST=1
+    for FILE
+    do
+	if test $FIRST -eq 0; then
+		echo $n1 "--More--(Next file: $FILE)$n2"
+		stty $cb -echo 2>/dev/null
+		ANS=`dd bs=1 count=1 2>/dev/null` 
+		stty $ncb echo 2>/dev/null
+		echo " "
+		if test "$ANS" = 'e' -o "$ANS" = 'q'; then
+			exit
+		fi
+	fi
+	if test "$ANS" != 's'; then
+		echo "------> $FILE <------"
+		bzip2 -cdfq "$FILE" | eval $more
+	fi
+	if test -t; then
+		FIRST=0
+	fi
+    done
+fi

_service:tar_scm:bzip2-1.0.8.tar.gz/bzmore.1 Added

@@ -0,0 +1,152 @@
+.\"Shamelessly copied from zmore.1 by Philippe Troin <phil@fifi.org>
+.\"for Debian GNU/Linux
+.TH BZMORE 1
+.SH NAME
+bzmore, bzless \- file perusal filter for crt viewing of bzip2 compressed text
+.SH SYNOPSIS
+.B bzmore
+ name ...  
+.br
+.B bzless
+ name ...  
+.SH NOTE
+In the following description,
+.I bzless
+and
+.I less
+can be used interchangeably with
+.I bzmore
+and
+.I more.
+.SH DESCRIPTION
+.I  Bzmore
+is a filter which allows examination of compressed or plain text files
+one screenful at a time on a soft-copy terminal.
+.I bzmore
+works on files compressed with
+.I bzip2
+and also on uncompressed files.
+If a file does not exist,
+.I bzmore
+looks for a file of the same name with the addition of a .bz2 suffix.
+.PP
+.I Bzmore
+normally pauses after each screenful, printing --More--
+at the bottom of the screen.
+If the user then types a carriage return, one more line is displayed.
+If the user hits a space,
+another screenful is displayed.  Other possibilities are enumerated later.
+.PP
+.I Bzmore
+looks in the file
+.I /etc/termcap
+to determine terminal characteristics,
+and to determine the default window size.
+On a terminal capable of displaying 24 lines,
+the default window size is 22 lines.
+Other sequences which may be typed when
+.I bzmore
+pauses, and their effects, are as follows (\fIi\fP is an optional integer
+argument, defaulting to 1) :
+.PP
+.IP \fIi\|\fP<space>
+display
+.I i
+more lines, (or another screenful if no argument is given)
+.PP
+.IP ^D
+display 11 more lines (a ``scroll'').
+If
+.I i
+is given, then the scroll size is set to \fIi\|\fP.
+.PP
+.IP d
+same as ^D (control-D)
+.PP
+.IP \fIi\|\fPz
+same as typing a space except that \fIi\|\fP, if present, becomes the new
+window size.  Note that the window size reverts back to the default at the
+end of the current file.
+.PP
+.IP \fIi\|\fPs
+skip \fIi\|\fP lines and print a screenful of lines
+.PP
+.IP \fIi\|\fPf
+skip \fIi\fP screenfuls and print a screenful of lines
+.PP
+.IP "q or Q"
+quit reading the current file; go on to the next (if any)
+.PP
+.IP "e or q"
+When the prompt --More--(Next file: 
+.IR file )
+is printed, this command causes bzmore to exit.
+.PP
+.IP s
+When the prompt --More--(Next file: 
+.IR file )
+is printed, this command causes bzmore to skip the next file and continue.
+.PP 
+.IP =
+Display the current line number.
+.PP
+.IP \fIi\|\fP/expr
+search for the \fIi\|\fP-th occurrence of the regular expression \fIexpr.\fP
+If the pattern is not found,
+.I bzmore
+goes on to the next file (if any).
+Otherwise, a screenful is displayed, starting two lines before the place
+where the expression was found.
+The user's erase and kill characters may be used to edit the regular
+expression.
+Erasing back past the first column cancels the search command.
+.PP
+.IP \fIi\|\fPn
+search for the \fIi\|\fP-th occurrence of the last regular expression entered.
+.PP
+.IP !command
+invoke a shell with \fIcommand\|\fP. 
+The character `!' in "command" are replaced with the
+previous shell command.  The sequence "\\!" is replaced by "!".
+.PP
+.IP ":q or :Q"
+quit reading the current file; go on to the next (if any)
+(same as q or Q).
+.PP
+.IP .
+(dot) repeat the previous command.
+.PP
+The commands take effect immediately, i.e., it is not necessary to
+type a carriage return.
+Up to the time when the command character itself is given,
+the user may hit the line kill character to cancel the numerical
+argument being formed.
+In addition, the user may hit the erase character to redisplay the
+--More-- message.
+.PP
+At any time when output is being sent to the terminal, the user can
+hit the quit key (normally control\-\\).
+.I Bzmore
+will stop sending output, and will display the usual --More--
+prompt.
+The user may then enter one of the above commands in the normal manner.
+Unfortunately, some output is lost when this is done, due to the
+fact that any characters waiting in the terminal's output queue
+are flushed when the quit signal occurs.
+.PP
+The terminal is set to
+.I noecho
+mode by this program so that the output can be continuous.
+What you type will thus not show on your terminal, except for the / and !
+commands.
+.PP
+If the standard output is not a teletype, then
+.I bzmore
+acts just like
+.I bzcat,
+except that a header is printed before each file.
+.SH FILES
+.DT
+/etc/termcap		Terminal data base
+.SH "SEE ALSO"
+more(1), less(1), bzip2(1), bzdiff(1), bzgrep(1)

_service:tar_scm:bzip2-1.0.8.tar.gz/compress.c Added

@@ -0,0 +1,672 @@
+
+/*-------------------------------------------------------------*/
+/*--- Compression machinery (not incl block sorting)        ---*/
+/*---                                            compress.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+/* CHANGES
+    0.9.0    -- original version.
+    0.9.0a/b -- no changes in this file.
+    0.9.0c   -- changed setting of nGroups in sendMTFValues() 
+                so as to do a bit better on small files
+*/
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+/*--- Bit stream I/O                              ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+void BZ2_bsInitWrite ( EState* s )
+{
+   s->bsLive = 0;
+   s->bsBuff = 0;
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsFinishWrite ( EState* s )
+{
+   while (s->bsLive > 0) {
+      s->zbitss->numZ = (UChar)(s->bsBuff >> 24);
+      s->numZ++;
+      s->bsBuff <<= 8;
+      s->bsLive -= 8;
+   }
+}
+
+
+/*---------------------------------------------------*/
+#define bsNEEDW(nz)                           \
+{                                             \
+   while (s->bsLive >= 8) {                   \
+      s->zbitss->numZ                       \
+         = (UChar)(s->bsBuff >> 24);          \
+      s->numZ++;                              \
+      s->bsBuff <<= 8;                        \
+      s->bsLive -= 8;                         \
+   }                                          \
+}
+
+
+/*---------------------------------------------------*/
+static
+__inline__
+void bsW ( EState* s, Int32 n, UInt32 v )
+{
+   bsNEEDW ( n );
+   s->bsBuff |= (v << (32 - s->bsLive - n));
+   s->bsLive += n;
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsPutUInt32 ( EState* s, UInt32 u )
+{
+   bsW ( s, 8, (u >> 24) & 0xffL );
+   bsW ( s, 8, (u >> 16) & 0xffL );
+   bsW ( s, 8, (u >>  8) & 0xffL );
+   bsW ( s, 8,  u        & 0xffL );
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsPutUChar ( EState* s, UChar c )
+{
+   bsW( s, 8, (UInt32)c );
+}
+
+
+/*---------------------------------------------------*/
+/*--- The back end proper                         ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+static
+void makeMaps_e ( EState* s )
+{
+   Int32 i;
+   s->nInUse = 0;
+   for (i = 0; i < 256; i++)
+      if (s->inUsei) {
+         s->unseqToSeqi = s->nInUse;
+         s->nInUse++;
+      }
+}
+
+
+/*---------------------------------------------------*/
+static
+void generateMTFValues ( EState* s )
+{
+   UChar   yy256;
+   Int32   i, j;
+   Int32   zPend;
+   Int32   wr;
+   Int32   EOB;
+
+   /* 
+      After sorting (eg, here),
+         s->arr1  0 .. s->nblock-1  holds sorted order,
+         and
+         ((UChar*)s->arr2)  0 .. s->nblock-1  
+         holds the original block data.
+
+      The first thing to do is generate the MTF values,
+      and put them in
+         ((UInt16*)s->arr1)  0 .. s->nblock-1 .
+      Because there are strictly fewer or equal MTF values
+      than block values, ptr values in this area are overwritten
+      with MTF values only when they are no longer needed.
+
+      The final compressed bitstream is generated into the
+      area starting at
+         (UChar*) (&((UChar*)s->arr2)s->nblock)
+
+      These storage aliases are set up in bzCompressInit(),
+      except for the last one, which is arranged in 
+      compressBlock().
+   */
+   UInt32* ptr   = s->ptr;
+   UChar* block  = s->block;
+   UInt16* mtfv  = s->mtfv;
+
+   makeMaps_e ( s );
+   EOB = s->nInUse+1;
+
+   for (i = 0; i <= EOB; i++) s->mtfFreqi = 0;
+
+   wr = 0;
+   zPend = 0;
+   for (i = 0; i < s->nInUse; i++) yyi = (UChar) i;
+
+   for (i = 0; i < s->nblock; i++) {
+      UChar ll_i;
+      AssertD ( wr <= i, "generateMTFValues(1)" );
+      j = ptri-1; if (j < 0) j += s->nblock;
+      ll_i = s->unseqToSeqblockj;
+      AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );
+
+      if (yy0 == ll_i) { 
+         zPend++;
+      } else {
+
+         if (zPend > 0) {
+            zPend--;
+            while (True) {
+               if (zPend & 1) {
+                  mtfvwr = BZ_RUNB; wr++; 
+                  s->mtfFreqBZ_RUNB++; 
+               } else {
+                  mtfvwr = BZ_RUNA; wr++; 
+                  s->mtfFreqBZ_RUNA++; 
+               }
+               if (zPend < 2) break;
+               zPend = (zPend - 2) / 2;
+            };
+            zPend = 0;
+         }
+         {
+            register UChar  rtmp;
+            register UChar* ryy_j;
+            register UChar  rll_i;
+            rtmp  = yy1;
+            yy1 = yy0;
+            ryy_j = &(yy1);
+            rll_i = ll_i;
+            while ( rll_i != rtmp ) {
+               register UChar rtmp2;
+               ryy_j++;

_service:tar_scm:bzip2-1.0.8.tar.gz/crctable.c Added

@@ -0,0 +1,104 @@
+
+/*-------------------------------------------------------------*/
+/*--- Table for doing CRCs                                  ---*/
+/*---                                            crctable.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*--
+  I think this is an implementation of the AUTODIN-II,
+  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
+  from code by Rob Warnock, in Section 51 of the
+  comp.compression FAQ.
+--*/
+
+UInt32 BZ2_crc32Table256 = {
+
+   /*-- Ugly, innit? --*/
+
+   0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
+   0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
+   0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
+   0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
+   0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
+   0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
+   0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
+   0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
+   0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
+   0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
+   0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
+   0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
+   0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
+   0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
+   0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
+   0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
+   0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
+   0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
+   0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
+   0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
+   0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
+   0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
+   0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
+   0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
+   0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
+   0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
+   0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
+   0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
+   0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
+   0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
+   0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
+   0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
+   0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
+   0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
+   0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
+   0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
+   0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
+   0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
+   0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
+   0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
+   0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
+   0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
+   0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
+   0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
+   0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
+   0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
+   0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
+   0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
+   0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
+   0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
+   0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
+   0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
+   0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
+   0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
+   0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
+   0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
+   0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
+   0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
+   0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
+   0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
+   0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
+   0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
+   0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
+   0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
+};
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                        crctable.c ---*/
+/*-------------------------------------------------------------*/

_service:tar_scm:bzip2-1.0.8.tar.gz/decompress.c Added

@@ -0,0 +1,652 @@
+
+/*-------------------------------------------------------------*/
+/*--- Decompression machinery                               ---*/
+/*---                                          decompress.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+static
+void makeMaps_d ( DState* s )
+{
+   Int32 i;
+   s->nInUse = 0;
+   for (i = 0; i < 256; i++)
+      if (s->inUsei) {
+         s->seqToUnseqs->nInUse = i;
+         s->nInUse++;
+      }
+}
+
+
+/*---------------------------------------------------*/
+#define RETURN(rrr)                               \
+   { retVal = rrr; goto save_state_and_return; };
+
+#define GET_BITS(lll,vvv,nnn)                     \
+   case lll: s->state = lll;                      \
+   while (True) {                                 \
+      if (s->bsLive >= nnn) {                     \
+         UInt32 v;                                \
+         v = (s->bsBuff >>                        \
+             (s->bsLive-nnn)) & ((1 << nnn)-1);   \
+         s->bsLive -= nnn;                        \
+         vvv = v;                                 \
+         break;                                   \
+      }                                           \
+      if (s->strm->avail_in == 0) RETURN(BZ_OK);  \
+      s->bsBuff                                   \
+         = (s->bsBuff << 8) |                     \
+           ((UInt32)                              \
+              (*((UChar*)(s->strm->next_in))));   \
+      s->bsLive += 8;                             \
+      s->strm->next_in++;                         \
+      s->strm->avail_in--;                        \
+      s->strm->total_in_lo32++;                   \
+      if (s->strm->total_in_lo32 == 0)            \
+         s->strm->total_in_hi32++;                \
+   }
+
+#define GET_UCHAR(lll,uuu)                        \
+   GET_BITS(lll,uuu,8)
+
+#define GET_BIT(lll,uuu)                          \
+   GET_BITS(lll,uuu,1)
+
+/*---------------------------------------------------*/
+#define GET_MTF_VAL(label1,label2,lval)           \
+{                                                 \
+   if (groupPos == 0) {                           \
+      groupNo++;                                  \
+      if (groupNo >= nSelectors)                  \
+         RETURN(BZ_DATA_ERROR);                   \
+      groupPos = BZ_G_SIZE;                       \
+      gSel = s->selectorgroupNo;                \
+      gMinlen = s->minLensgSel;                 \
+      gLimit = &(s->limitgSel0);              \
+      gPerm = &(s->permgSel0);                \
+      gBase = &(s->basegSel0);                \
+   }                                              \
+   groupPos--;                                    \
+   zn = gMinlen;                                  \
+   GET_BITS(label1, zvec, zn);                    \
+   while (1) {                                    \
+      if (zn > 20 /* the longest code */)         \
+         RETURN(BZ_DATA_ERROR);                   \
+      if (zvec <= gLimitzn) break;              \
+      zn++;                                       \
+      GET_BIT(label2, zj);                        \
+      zvec = (zvec << 1) | zj;                    \
+   };                                             \
+   if (zvec - gBasezn < 0                       \
+       || zvec - gBasezn >= BZ_MAX_ALPHA_SIZE)  \
+      RETURN(BZ_DATA_ERROR);                      \
+   lval = gPermzvec - gBasezn;                \
+}
+
+
+/*---------------------------------------------------*/
+Int32 BZ2_decompress ( DState* s )
+{
+   UChar      uc;
+   Int32      retVal;
+   Int32      minLen, maxLen;
+   bz_stream* strm = s->strm;
+
+   /* stuff that needs to be saved/restored */
+   Int32  i;
+   Int32  j;
+   Int32  t;
+   Int32  alphaSize;
+   Int32  nGroups;
+   Int32  nSelectors;
+   Int32  EOB;
+   Int32  groupNo;
+   Int32  groupPos;
+   Int32  nextSym;
+   Int32  nblockMAX;
+   Int32  nblock;
+   Int32  es;
+   Int32  N;
+   Int32  curr;
+   Int32  zt;
+   Int32  zn; 
+   Int32  zvec;
+   Int32  zj;
+   Int32  gSel;
+   Int32  gMinlen;
+   Int32* gLimit;
+   Int32* gBase;
+   Int32* gPerm;
+
+   if (s->state == BZ_X_MAGIC_1) {
+      /*initialise the save area*/
+      s->save_i           = 0;
+      s->save_j           = 0;
+      s->save_t           = 0;
+      s->save_alphaSize   = 0;
+      s->save_nGroups     = 0;
+      s->save_nSelectors  = 0;
+      s->save_EOB         = 0;
+      s->save_groupNo     = 0;
+      s->save_groupPos    = 0;
+      s->save_nextSym     = 0;
+      s->save_nblockMAX   = 0;
+      s->save_nblock      = 0;
+      s->save_es          = 0;
+      s->save_N           = 0;
+      s->save_curr        = 0;
+      s->save_zt          = 0;
+      s->save_zn          = 0;
+      s->save_zvec        = 0;
+      s->save_zj          = 0;
+      s->save_gSel        = 0;
+      s->save_gMinlen     = 0;
+      s->save_gLimit      = NULL;
+      s->save_gBase       = NULL;
+      s->save_gPerm       = NULL;
+   }
+
+   /*restore from the save area*/
+   i           = s->save_i;
+   j           = s->save_j;
+   t           = s->save_t;
+   alphaSize   = s->save_alphaSize;
+   nGroups     = s->save_nGroups;
+   nSelectors  = s->save_nSelectors;
+   EOB         = s->save_EOB;
+   groupNo     = s->save_groupNo;
+   groupPos    = s->save_groupPos;
+   nextSym     = s->save_nextSym;
+   nblockMAX   = s->save_nblockMAX;
+   nblock      = s->save_nblock;
+   es          = s->save_es;
+   N           = s->save_N;
+   curr        = s->save_curr;
+   zt          = s->save_zt;
+   zn          = s->save_zn; 
+   zvec        = s->save_zvec;
+   zj          = s->save_zj;
+   gSel        = s->save_gSel;
+   gMinlen     = s->save_gMinlen;
+   gLimit      = s->save_gLimit;
+   gBase       = s->save_gBase;
+   gPerm       = s->save_gPerm;
+
+   retVal = BZ_OK;
+
+   switch (s->state) {
+
+      GET_UCHAR(BZ_X_MAGIC_1, uc);
+      if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC);
+

_service:tar_scm:bzip2-1.0.8.tar.gz/dlltest.c Added

@@ -0,0 +1,175 @@
+/*
+   minibz2
+      libbz2.dll test program.
+      by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
+      This file is Public Domain.  Welcome any email to me.
+
+   usage: minibz2 -d -{1,2,..9} srcfilename destfilename
+*/
+
+#define BZ_IMPORT
+#include <stdio.h>
+#include <stdlib.h>
+#include "bzlib.h"
+#ifdef _WIN32
+#include <io.h>
+#endif
+
+
+#ifdef _WIN32
+
+#define BZ2_LIBNAME "libbz2-1.0.2.DLL" 
+
+#include <windows.h>
+static int BZ2DLLLoaded = 0;
+static HINSTANCE BZ2DLLhLib;
+int BZ2DLLLoadLibrary(void)
+{
+   HINSTANCE hLib;
+
+   if(BZ2DLLLoaded==1){return 0;}
+   hLib=LoadLibrary(BZ2_LIBNAME);
+   if(hLib == NULL){
+      fprintf(stderr,"Can't load %s\n",BZ2_LIBNAME);
+      return -1;
+   }
+   BZ2_bzlibVersion=GetProcAddress(hLib,"BZ2_bzlibVersion");
+   BZ2_bzopen=GetProcAddress(hLib,"BZ2_bzopen");
+   BZ2_bzdopen=GetProcAddress(hLib,"BZ2_bzdopen");
+   BZ2_bzread=GetProcAddress(hLib,"BZ2_bzread");
+   BZ2_bzwrite=GetProcAddress(hLib,"BZ2_bzwrite");
+   BZ2_bzflush=GetProcAddress(hLib,"BZ2_bzflush");
+   BZ2_bzclose=GetProcAddress(hLib,"BZ2_bzclose");
+   BZ2_bzerror=GetProcAddress(hLib,"BZ2_bzerror");
+
+   if (!BZ2_bzlibVersion || !BZ2_bzopen || !BZ2_bzdopen
+       || !BZ2_bzread || !BZ2_bzwrite || !BZ2_bzflush
+       || !BZ2_bzclose || !BZ2_bzerror) {
+      fprintf(stderr,"GetProcAddress failed.\n");
+      return -1;
+   }
+   BZ2DLLLoaded=1;
+   BZ2DLLhLib=hLib;
+   return 0;
+
+}
+int BZ2DLLFreeLibrary(void)
+{
+   if(BZ2DLLLoaded==0){return 0;}
+   FreeLibrary(BZ2DLLhLib);
+   BZ2DLLLoaded=0;
+}
+#endif /* WIN32 */
+
+void usage(void)
+{
+   puts("usage: minibz2 -d -{1,2,..9} srcfilename destfilename");
+}
+
+int main(int argc,char *argv)
+{
+   int decompress = 0;
+   int level = 9;
+   char *fn_r = NULL;
+   char *fn_w = NULL;
+
+#ifdef _WIN32
+   if(BZ2DLLLoadLibrary()<0){
+      fprintf(stderr,"Loading of %s failed.  Giving up.\n", BZ2_LIBNAME);
+      exit(1);
+   }
+   printf("Loading of %s succeeded.  Library version is %s.\n",
+          BZ2_LIBNAME, BZ2_bzlibVersion() );
+#endif
+   while(++argv,--argc){
+      if(**argv =='-' || **argv=='/'){
+         char *p;
+
+         for(p=*argv+1;*p;p++){
+            if(*p=='d'){
+               decompress = 1;
+            }else if('1'<=*p && *p<='9'){
+               level = *p - '0';
+            }else{
+               usage();
+               exit(1);
+            }
+         }
+      }else{
+         break;
+      }
+   }
+   if(argc>=1){
+      fn_r = *argv;
+      argc--;argv++;
+   }else{
+      fn_r = NULL;
+   }
+   if(argc>=1){
+      fn_w = *argv;
+      argc--;argv++;
+   }else{
+      fn_w = NULL;
+   }
+   {
+      int len;
+      char buff0x1000;
+      char mode10;
+
+      if(decompress){
+         BZFILE *BZ2fp_r = NULL;
+         FILE *fp_w = NULL;
+
+         if(fn_w){
+            if((fp_w = fopen(fn_w,"wb"))==NULL){
+               printf("can't open %s\n",fn_w);
+               perror("reason:");
+               exit(1);
+            }
+         }else{
+            fp_w = stdout;
+         }
+         if((fn_r == NULL && (BZ2fp_r = BZ2_bzdopen(fileno(stdin),"rb"))==NULL)
+            || (fn_r != NULL && (BZ2fp_r = BZ2_bzopen(fn_r,"rb"))==NULL)){
+            printf("can't bz2openstream\n");
+            exit(1);
+         }
+         while((len=BZ2_bzread(BZ2fp_r,buff,0x1000))>0){
+            fwrite(buff,1,len,fp_w);
+         }
+         BZ2_bzclose(BZ2fp_r);
+         if(fp_w != stdout) fclose(fp_w);
+      }else{
+         BZFILE *BZ2fp_w = NULL;
+         FILE *fp_r = NULL;
+
+         if(fn_r){
+            if((fp_r = fopen(fn_r,"rb"))==NULL){
+               printf("can't open %s\n",fn_r);
+               perror("reason:");
+               exit(1);
+            }
+         }else{
+            fp_r = stdin;
+         }
+         mode0='w';
+         mode1 = '0' + level;
+         mode2 = '\0';
+
+         if((fn_w == NULL && (BZ2fp_w = BZ2_bzdopen(fileno(stdout),mode))==NULL)
+            || (fn_w !=NULL && (BZ2fp_w = BZ2_bzopen(fn_w,mode))==NULL)){
+            printf("can't bz2openstream\n");
+            exit(1);
+         }
+         while((len=fread(buff,1,0x1000,fp_r))>0){
+            BZ2_bzwrite(BZ2fp_w,buff,len);
+         }
+         BZ2_bzclose(BZ2fp_w);
+         if(fp_r!=stdin)fclose(fp_r);
+      }
+   }
+#ifdef _WIN32
+   BZ2DLLFreeLibrary();
+#endif
+   return 0;
+}

_service:tar_scm:bzip2-1.0.8.tar.gz/dlltest.dsp Added

@@ -0,0 +1,93 @@
+# Microsoft Developer Studio Project File - Name="dlltest" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** ÒWµÈ¢Å¾³¢ **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=dlltest - Win32 Debug
+!MESSAGE ±êÍLøÈÒ²¸Ì§²ÙÅÍ èÜ¹ñB ±ÌÌßÛ¼Þª¸ÄðËÞÙÄÞ·é½ßÉÍ NMAKE ðgpµÄ¾³¢B
+!MESSAGE Ò²¸Ì§²ÙÌ´¸½Îß°Ä ºÏÝÄÞðgpµÄÀsµÄ¾³¢
+!MESSAGE 
+!MESSAGE NMAKE /f "dlltest.mak".
+!MESSAGE 
+!MESSAGE NMAKE ÌÀsÉ\¬ðwèÅ«Ü·
+!MESSAGE ºÏÝÄÞ ×²ÝãÅÏ¸ÛÌÝèðè`µÜ·Bá:
+!MESSAGE 
+!MESSAGE NMAKE /f "dlltest.mak" CFG="dlltest - Win32 Debug"
+!MESSAGE 
+!MESSAGE IðÂ\ÈËÞÙÄÞ Ó°ÄÞ:
+!MESSAGE 
+!MESSAGE "dlltest - Win32 Release" ("Win32 (x86) Console Application" p)
+!MESSAGE "dlltest - Win32 Debug" ("Win32 (x86) Console Application" p)
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "dlltest - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x411 /d "NDEBUG"
+# ADD RSC /l 0x411 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 /out:"minibz2.exe"
+
+!ELSEIF  "$(CFG)" == "dlltest - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "dlltest_"
+# PROP BASE Intermediate_Dir "dlltest_"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "dlltest_"
+# PROP Intermediate_Dir "dlltest_"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x411 /d "_DEBUG"
+# ADD RSC /l 0x411 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /out:"minibz2.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "dlltest - Win32 Release"
+# Name "dlltest - Win32 Debug"
+# Begin Source File
+
+SOURCE=.\bzlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\dlltest.c
+# End Source File
+# End Target
+# End Project

_service:tar_scm:bzip2-1.0.8.tar.gz/entities.xml Added

_service:tar_scm:bzip2-1.0.8.tar.gz/format.pl Added

@@ -0,0 +1,68 @@
+#!/usr/bin/perl -w
+#
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.8 of 13 July 2019
+# Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
+#
+use strict;
+
+# get command line values:
+if ( $#ARGV !=1 ) {
+    die "Usage:  $0 xml_infile xml_outfile\n";
+}
+
+my $infile = shift;
+# check infile exists
+die "Can't find file \"$infile\""
+  unless -f $infile;
+# check we can read infile
+if (! -r $infile) {
+    die "Can't read input $infile\n";
+}
+# check we can open infile
+open( INFILE,"<$infile" ) or 
+    die "Can't input $infile $!";
+
+#my $outfile = 'fmt-manual.xml';
+my $outfile = shift;
+#print "Infile: $infile, Outfile: $outfile\n";
+# check we can write to outfile
+open( OUTFILE,">$outfile" ) or 
+    die "Can't output $outfile $! for writing";
+
+my ($prev, $curr, $str);
+$prev = ''; $curr = '';
+while ( <INFILE> ) {
+
+		print OUTFILE $prev;
+    $prev = $curr;
+    $curr = $_;
+    $str = '';
+
+    if ( $prev =~ /<programlisting>$|<screen>$/ ) {
+        chomp $prev;
+        $curr = join( '', $prev, "<!CDATA", $curr );
+				$prev = '';
+        next;
+    }
+    elsif ( $curr =~ /<\/programlisting>|<\/screen>/ ) {
+        chomp $prev;
+        $curr = join( '', $prev, ">", $curr );
+				$prev = '';
+        next;
+    }
+}
+print OUTFILE $curr;
+close INFILE;
+close OUTFILE;
+exit;

_service:tar_scm:bzip2-1.0.8.tar.gz/huffman.c Added

@@ -0,0 +1,205 @@
+
+/*-------------------------------------------------------------*/
+/*--- Huffman coding low-level stuff                        ---*/
+/*---                                             huffman.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*---------------------------------------------------*/
+#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
+#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
+#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
+
+#define ADDWEIGHTS(zw1,zw2)                           \
+   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
+   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
+
+#define UPHEAP(z)                                     \
+{                                                     \
+   Int32 zz, tmp;                                     \
+   zz = z; tmp = heapzz;                            \
+   while (weighttmp < weightheapzz >> 1) {      \
+      heapzz = heapzz >> 1;                       \
+      zz >>= 1;                                       \
+   }                                                  \
+   heapzz = tmp;                                    \
+}
+
+#define DOWNHEAP(z)                                   \
+{                                                     \
+   Int32 zz, yy, tmp;                                 \
+   zz = z; tmp = heapzz;                            \
+   while (True) {                                     \
+      yy = zz << 1;                                   \
+      if (yy > nHeap) break;                          \
+      if (yy < nHeap &&                               \
+          weightheapyy+1 < weightheapyy)      \
+         yy++;                                        \
+      if (weighttmp < weightheapyy) break;      \
+      heapzz = heapyy;                            \
+      zz = yy;                                        \
+   }                                                  \
+   heapzz = tmp;                                    \
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbMakeCodeLengths ( UChar *len, 
+                             Int32 *freq,
+                             Int32 alphaSize,
+                             Int32 maxLen )
+{
+   /*--
+      Nodes and heap entries run from 1.  Entry 0
+      for both the heap and nodes is a sentinel.
+   --*/
+   Int32 nNodes, nHeap, n1, n2, i, j, k;
+   Bool  tooLong;
+
+   Int32 heap    BZ_MAX_ALPHA_SIZE + 2 ;
+   Int32 weight  BZ_MAX_ALPHA_SIZE * 2 ;
+   Int32 parent  BZ_MAX_ALPHA_SIZE * 2 ; 
+
+   for (i = 0; i < alphaSize; i++)
+      weighti+1 = (freqi == 0 ? 1 : freqi) << 8;
+
+   while (True) {
+
+      nNodes = alphaSize;
+      nHeap = 0;
+
+      heap0 = 0;
+      weight0 = 0;
+      parent0 = -2;
+
+      for (i = 1; i <= alphaSize; i++) {
+         parenti = -1;
+         nHeap++;
+         heapnHeap = i;
+         UPHEAP(nHeap);
+      }
+
+      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
+   
+      while (nHeap > 1) {
+         n1 = heap1; heap1 = heapnHeap; nHeap--; DOWNHEAP(1);
+         n2 = heap1; heap1 = heapnHeap; nHeap--; DOWNHEAP(1);
+         nNodes++;
+         parentn1 = parentn2 = nNodes;
+         weightnNodes = ADDWEIGHTS(weightn1, weightn2);
+         parentnNodes = -1;
+         nHeap++;
+         heapnHeap = nNodes;
+         UPHEAP(nHeap);
+      }
+
+      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
+
+      tooLong = False;
+      for (i = 1; i <= alphaSize; i++) {
+         j = 0;
+         k = i;
+         while (parentk >= 0) { k = parentk; j++; }
+         leni-1 = j;
+         if (j > maxLen) tooLong = True;
+      }
+      
+      if (! tooLong) break;
+
+      /* 17 Oct 04: keep-going condition for the following loop used
+         to be 'i < alphaSize', which missed the last element,
+         theoretically leading to the possibility of the compressor
+         looping.  However, this count-scaling step is only needed if
+         one of the generated Huffman code words is longer than
+         maxLen, which up to and including version 1.0.2 was 20 bits,
+         which is extremely unlikely.  In version 1.0.3 maxLen was
+         changed to 17 bits, which has minimal effect on compression
+         ratio, but does mean this scaling step is used from time to
+         time, enough to verify that it works.
+
+         This means that bzip2-1.0.3 and later will only produce
+         Huffman codes with a maximum length of 17 bits.  However, in
+         order to preserve backwards compatibility with bitstreams
+         produced by versions pre-1.0.3, the decompressor must still
+         handle lengths of up to 20. */
+
+      for (i = 1; i <= alphaSize; i++) {
+         j = weighti >> 8;
+         j = 1 + (j / 2);
+         weighti = j << 8;
+      }
+   }
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbAssignCodes ( Int32 *code,
+                         UChar *length,
+                         Int32 minLen,
+                         Int32 maxLen,
+                         Int32 alphaSize )
+{
+   Int32 n, vec, i;
+
+   vec = 0;
+   for (n = minLen; n <= maxLen; n++) {
+      for (i = 0; i < alphaSize; i++)
+         if (lengthi == n) { codei = vec; vec++; };
+      vec <<= 1;
+   }
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbCreateDecodeTables ( Int32 *limit,
+                                Int32 *base,
+                                Int32 *perm,
+                                UChar *length,
+                                Int32 minLen,
+                                Int32 maxLen,
+                                Int32 alphaSize )
+{
+   Int32 pp, i, j, vec;
+
+   pp = 0;
+   for (i = minLen; i <= maxLen; i++)
+      for (j = 0; j < alphaSize; j++)
+         if (lengthj == i) { permpp = j; pp++; };
+
+   for (i = 0; i < BZ_MAX_CODE_LEN; i++) basei = 0;
+   for (i = 0; i < alphaSize; i++) baselengthi+1++;
+
+   for (i = 1; i < BZ_MAX_CODE_LEN; i++) basei += basei-1;
+
+   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limiti = 0;
+   vec = 0;
+
+   for (i = minLen; i <= maxLen; i++) {
+      vec += (basei+1 - basei);
+      limiti = vec-1;
+      vec <<= 1;
+   }
+   for (i = minLen + 1; i <= maxLen; i++)
+      basei = ((limiti-1 + 1) << 1) - basei;

_service:tar_scm:bzip2-1.0.8.tar.gz/libbz2.def Added

_service:tar_scm:bzip2-1.0.8.tar.gz/libbz2.dsp Added

@@ -0,0 +1,130 @@
+# Microsoft Developer Studio Project File - Name="libbz2" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** ÒWµÈ¢Å¾³¢ **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+
+CFG=libbz2 - Win32 Debug
+!MESSAGE ±êÍLøÈÒ²¸Ì§²ÙÅÍ èÜ¹ñB ±ÌÌßÛ¼Þª¸ÄðËÞÙÄÞ·é½ßÉÍ NMAKE ðgpµÄ¾³¢B
+!MESSAGE Ò²¸Ì§²ÙÌ´¸½Îß°Ä ºÏÝÄÞðgpµÄÀsµÄ¾³¢
+!MESSAGE 
+!MESSAGE NMAKE /f "libbz2.mak".
+!MESSAGE 
+!MESSAGE NMAKE ÌÀsÉ\¬ðwèÅ«Ü·
+!MESSAGE ºÏÝÄÞ ×²ÝãÅÏ¸ÛÌÝèðè`µÜ·Bá:
+!MESSAGE 
+!MESSAGE NMAKE /f "libbz2.mak" CFG="libbz2 - Win32 Debug"
+!MESSAGE 
+!MESSAGE IðÂ\ÈËÞÙÄÞ Ó°ÄÞ:
+!MESSAGE 
+!MESSAGE "libbz2 - Win32 Release" ("Win32 (x86) Dynamic-Link Library" p)
+!MESSAGE "libbz2 - Win32 Debug" ("Win32 (x86) Dynamic-Link Library" p)
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "libbz2 - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
+# ADD BASE RSC /l 0x411 /d "NDEBUG"
+# ADD RSC /l 0x411 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386 /out:"libbz2.dll"
+
+!ELSEIF  "$(CFG)" == "libbz2 - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
+# ADD BASE RSC /l 0x411 /d "_DEBUG"
+# ADD RSC /l 0x411 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:"libbz2.dll" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "libbz2 - Win32 Release"
+# Name "libbz2 - Win32 Debug"
+# Begin Source File
+
+SOURCE=.\blocksort.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\bzlib.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\bzlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\bzlib_private.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\crctable.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\decompress.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\huffman.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\libbz2.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\randtable.c
+# End Source File
+# End Target
+# End Project

_service:tar_scm:bzip2-1.0.8.tar.gz/makefile.msc Added

@@ -0,0 +1,63 @@
+# Makefile for Microsoft Visual C++ 6.0
+# usage: nmake -f makefile.msc
+# K.M. Syring (syring@gsf.de)
+# Fixed up by JRS for bzip2-0.9.5d release.
+
+CC=cl
+CFLAGS= -DWIN32 -MD -Ox -D_FILE_OFFSET_BITS=64 -nologo
+
+OBJS= blocksort.obj  \
+      huffman.obj    \
+      crctable.obj   \
+      randtable.obj  \
+      compress.obj   \
+      decompress.obj \
+      bzlib.obj
+
+all: lib bzip2 test
+
+bzip2: lib
+	$(CC) $(CFLAGS) -o bzip2 bzip2.c libbz2.lib setargv.obj
+	$(CC) $(CFLAGS) -o bzip2recover bzip2recover.c
+
+lib: $(OBJS)
+	lib /out:libbz2.lib $(OBJS)
+
+test: bzip2
+	type words1
+	.\\bzip2 -1  < sample1.ref > sample1.rb2
+	.\\bzip2 -2  < sample2.ref > sample2.rb2
+	.\\bzip2 -3  < sample3.ref > sample3.rb2
+	.\\bzip2 -d  < sample1.bz2 > sample1.tst
+	.\\bzip2 -d  < sample2.bz2 > sample2.tst
+	.\\bzip2 -ds < sample3.bz2 > sample3.tst
+	@echo All six of the fc's should find no differences.
+	@echo If fc finds an error on sample3.bz2, this could be
+	@echo because WinZip's 'TAR file smart CR/LF conversion'
+	@echo is too clever for its own good.  Disable this option.
+	@echo The correct size for sample3.ref is 120,244.  If it
+	@echo is 150,251, WinZip has messed it up.
+	fc sample1.bz2 sample1.rb2 
+	fc sample2.bz2 sample2.rb2
+	fc sample3.bz2 sample3.rb2
+	fc sample1.tst sample1.ref
+	fc sample2.tst sample2.ref
+	fc sample3.tst sample3.ref
+
+
+
+clean: 
+	del *.obj
+	del libbz2.lib 
+	del bzip2.exe
+	del bzip2recover.exe
+	del sample1.rb2 
+	del sample2.rb2 
+	del sample3.rb2
+	del sample1.tst 
+	del sample2.tst
+	del sample3.tst
+
+.c.obj: 
+	$(CC) $(CFLAGS) -c $*.c -o $*.obj
+

_service:tar_scm:bzip2-1.0.8.tar.gz/manual.html Added

@@ -0,0 +1,2541 @@
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
+<title>bzip2 and libbzip2, version 1.0.8</title>
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<link rel="stylesheet" type="text/css" href="bzip.css" />
+  <style type="text/css" media="screen">/* Colours:
+#74240f  dark brown      h1, h2, h3, h4
+#336699  medium blue     links
+#339999  turquoise       link hover colour
+#202020  almost black    general text
+#761596  purple          md5sum text
+#626262  dark gray       pre border
+#eeeeee  very light gray pre background
+#f2f2f9  very light blue nav table background
+#3366cc  medium blue     nav table border
+*/
+
+a, a:link, a:visited, a:active { color: #336699; }
+a:hover { color: #339999; }
+
+body { font: 80%/126% sans-serif; }
+h1, h2, h3, h4 { color: #74240f; }
+
+dt { color: #336699; font-weight: bold }
+dd { 
+ margin-left: 1.5em; 
+ padding-bottom: 0.8em;
+}
+
+/* -- ruler -- */
+div.hr_blue { 
+  height:  3px; 
+  background:#ffffff url("../images/hr_blue.png") repeat-x; }
+div.hr_blue hr { display:none; }
+
+/* release styles */
+#release p { margin-top: 0.4em; }
+#release .md5sum { color: #761596; }
+
+
+/* ------ styles for docs|manuals|howto ------ */
+/* -- lists -- */
+ul  { 
+ margin:     0px 4px 16px 16px;
+ padding:    0px;
+ list-style: url("../images/li-blue.png"); 
+}
+ul li { 
+ margin-bottom: 10px;
+}
+ul ul	{ 
+ list-style-type:  none; 
+ list-style-image: none; 
+ margin-left:      0px; 
+}
+
+/* header / footer nav tables */
+table.nav {
+ border:     solid 1px #3366cc;
+ background: #f2f2f9;
+ background-color: #f2f2f9;
+ margin-bottom: 0.5em;
+}
+/* don't have underlined links in chunked nav menus */
+table.nav a { text-decoration: none; }
+table.nav a:hover { text-decoration: underline; }
+table.nav td { font-size: 85%; }
+
+code, tt, pre { font-size: 120%; }
+code, tt { color: #761596; }
+
+div.literallayout, pre.programlisting, pre.screen {
+ color:      #000000;
+ padding:    0.5em;
+ background: #eeeeee;
+ border:     1px solid #626262;
+ background-color: #eeeeee;
+ margin: 4px 0px 4px 0px; 
+}
+</style>
+</head>
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div lang="en" class="book">
+<div class="titlepage">
+<div>
+<div><h1 class="title">
+<a name="userman"></a>bzip2 and libbzip2, version 1.0.8</h1></div>
+<div><h2 class="subtitle">A program and library for data compression</h2></div>
+<div><div class="authorgroup"><div class="author">
+<h3 class="author">
+<span class="firstname">Julian</span> <span class="surname">Seward</span>
+</h3>
+<div class="affiliation"><span class="orgname">https://sourceware.org/bzip2/<br></span></div>
+</div></div></div>
+<div><p class="releaseinfo">Version 1.0.8 of 13 July 2019</p></div>
+<div><p class="copyright">Copyright © 1996-2019 Julian Seward</p></div>
+<div><div class="legalnotice">
+<a name="legal"></a><p>This program, <code class="computeroutput">bzip2</code>, the
+  associated library <code class="computeroutput">libbzip2</code>, and
+  all documentation, are copyright © 1996-2019 Julian Seward.
+  All rights reserved.</p>
+<p>Redistribution and use in source and binary forms, with
+  or without modification, are permitted provided that the
+  following conditions are met:</p>
+<div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: bullet; ">
+<li class="listitem" style="list-style-type: disc"><p>Redistributions of source code must retain the
+   above copyright notice, this list of conditions and the
+   following disclaimer.</p></li>
+<li class="listitem" style="list-style-type: disc"><p>The origin of this software must not be
+   misrepresented; you must not claim that you wrote the original
+   software.  If you use this software in a product, an
+   acknowledgment in the product documentation would be
+   appreciated but is not required.</p></li>
+<li class="listitem" style="list-style-type: disc"><p>Altered source versions must be plainly marked
+   as such, and must not be misrepresented as being the original
+   software.</p></li>
+<li class="listitem" style="list-style-type: disc"><p>The name of the author may not be used to
+   endorse or promote products derived from this software without
+   specific prior written permission.</p></li>
+</ul></div>
+<p>THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY
+  EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+  PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+  AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+  IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.</p>
+<p>PATENTS: To the best of my knowledge,
+ <code class="computeroutput">bzip2</code> and
+ <code class="computeroutput">libbzip2</code> do not use any patented
+ algorithms.  However, I do not have the resources to carry
+ out a patent search.  Therefore I cannot give any guarantee of
+ the above statement.
+ </p>
+</div></div>
+</div>
+<hr>
+</div>
+<div class="toc">
+<p><b>Table of Contents</b></p>
+<dl class="toc">
+<dt><span class="chapter"><a href="#intro">1. Introduction</a></span></dt>
+<dt><span class="chapter"><a href="#using">2. How to use bzip2</a></span></dt>
+<dd><dl>
+<dt><span class="sect1"><a href="#name">2.1. NAME</a></span></dt>
+<dt><span class="sect1"><a href="#synopsis">2.2. SYNOPSIS</a></span></dt>
+<dt><span class="sect1"><a href="#description">2.3. DESCRIPTION</a></span></dt>
+<dt><span class="sect1"><a href="#options">2.4. OPTIONS</a></span></dt>
+<dt><span class="sect1"><a href="#memory-management">2.5. MEMORY MANAGEMENT</a></span></dt>
+<dt><span class="sect1"><a href="#recovering">2.6. RECOVERING DATA FROM DAMAGED FILES</a></span></dt>
+<dt><span class="sect1"><a href="#performance">2.7. PERFORMANCE NOTES</a></span></dt>
+<dt><span class="sect1"><a href="#caveats">2.8. CAVEATS</a></span></dt>
+<dt><span class="sect1"><a href="#author">2.9. AUTHOR</a></span></dt>
+</dl></dd>
+<dt><span class="chapter"><a href="#libprog">3. 
+Programming with <code class="computeroutput">libbzip2</code>
+</a></span></dt>
+<dd><dl>
+<dt><span class="sect1"><a href="#top-level">3.1. Top-level structure</a></span></dt>
+<dd><dl>
+<dt><span class="sect2"><a href="#ll-summary">3.1.1. Low-level summary</a></span></dt>
+<dt><span class="sect2"><a href="#hl-summary">3.1.2. High-level summary</a></span></dt>
+<dt><span class="sect2"><a href="#util-fns-summary">3.1.3. Utility functions summary</a></span></dt>
+</dl></dd>
+<dt><span class="sect1"><a href="#err-handling">3.2. Error handling</a></span></dt>
+<dt><span class="sect1"><a href="#low-level">3.3. Low-level interface</a></span></dt>
+<dd><dl>
+<dt><span class="sect2"><a href="#bzcompress-init">3.3.1. BZ2_bzCompressInit</a></span></dt>
+<dt><span class="sect2"><a href="#bzCompress">3.3.2. BZ2_bzCompress</a></span></dt>
+<dt><span class="sect2"><a href="#bzCompress-end">3.3.3. BZ2_bzCompressEnd</a></span></dt>
+<dt><span class="sect2"><a href="#bzDecompress-init">3.3.4. BZ2_bzDecompressInit</a></span></dt>
+<dt><span class="sect2"><a href="#bzDecompress">3.3.5. BZ2_bzDecompress</a></span></dt>
+<dt><span class="sect2"><a href="#bzDecompress-end">3.3.6. BZ2_bzDecompressEnd</a></span></dt>
+</dl></dd>
+<dt><span class="sect1"><a href="#hl-interface">3.4. High-level interface</a></span></dt>
+<dd><dl>
+<dt><span class="sect2"><a href="#bzreadopen">3.4.1. BZ2_bzReadOpen</a></span></dt>
+<dt><span class="sect2"><a href="#bzread">3.4.2. BZ2_bzRead</a></span></dt>
+<dt><span class="sect2"><a href="#bzreadgetunused">3.4.3. BZ2_bzReadGetUnused</a></span></dt>
+<dt><span class="sect2"><a href="#bzreadclose">3.4.4. BZ2_bzReadClose</a></span></dt>
+<dt><span class="sect2"><a href="#bzwriteopen">3.4.5. BZ2_bzWriteOpen</a></span></dt>
+<dt><span class="sect2"><a href="#bzwrite">3.4.6. BZ2_bzWrite</a></span></dt>
+<dt><span class="sect2"><a href="#bzwriteclose">3.4.7. BZ2_bzWriteClose</a></span></dt>
+<dt><span class="sect2"><a href="#embed">3.4.8. Handling embedded compressed data streams</a></span></dt>
+<dt><span class="sect2"><a href="#std-rdwr">3.4.9. Standard file-reading/writing code</a></span></dt>
+</dl></dd>
+<dt><span class="sect1"><a href="#util-fns">3.5. Utility functions</a></span></dt>
+<dd><dl>
+<dt><span class="sect2"><a href="#bzbufftobuffcompress">3.5.1. BZ2_bzBuffToBuffCompress</a></span></dt>
+<dt><span class="sect2"><a href="#bzbufftobuffdecompress">3.5.2. BZ2_bzBuffToBuffDecompress</a></span></dt>
+</dl></dd>
+<dt><span class="sect1"><a href="#zlib-compat">3.6. zlib compatibility functions</a></span></dt>
+<dt><span class="sect1"><a href="#stdio-free">3.7. Using the library in a stdio-free environment</a></span></dt>
+<dd><dl>

_service:tar_scm:bzip2-1.0.8.tar.gz/manual.pdf Added

_service:tar_scm:bzip2-1.0.8.tar.gz/manual.ps Added

@@ -0,0 +1,216419 @@
+%!PS-Adobe-3.0
+%Produced by poppler pdftops version: 0.26.5 (http://poppler.freedesktop.org)
+%%Creator: PassiveTeX 1.25
+%%LanguageLevel: 2
+%%DocumentSuppliedResources: (atend)
+%%DocumentMedia: Letter 612 792 0 () ()
+%%BoundingBox: 0 0 612 792
+%%Pages: 38
+%%EndComments
+%%BeginProlog
+%%BeginResource: procset xpdf 3.00 0
+%%Copyright: Copyright 1996-2011 Glyph & Cog, LLC
+/xpdf 75 dict def xpdf begin
+% PDF special state
+/pdfDictSize 15 def
+/pdfSetup {
+  /setpagedevice where {
+    pop 2 dict begin
+      /Policies 1 dict dup begin /PageSize 6 def end def
+      { /Duplex true def } if
+    currentdict end setpagedevice
+  } {
+    pop
+  } ifelse
+} def
+/pdfSetupPaper {
+  % Change paper size, but only if different from previous paper size otherwise
+  % duplex fails. PLRM specifies a tolerance of 5 pts when matching paper size
+  % so we use the same when checking if the size changes.
+  /setpagedevice where {
+    pop currentpagedevice
+    /PageSize known {
+      2 copy
+      currentpagedevice /PageSize get aload pop
+      exch 4 1 roll
+      sub abs 5 gt
+      3 1 roll
+      sub abs 5 gt
+      or
+    } {
+      true
+    } ifelse
+    {
+      2 array astore
+      2 dict begin
+        /PageSize exch def
+        /ImagingBBox null def
+      currentdict end
+      setpagedevice
+    } {
+      pop pop
+    } ifelse
+  } {
+    pop
+  } ifelse
+} def
+/pdfStartPage {
+  pdfDictSize dict begin
+  /pdfFillCS  def
+  /pdfFillXform {} def
+  /pdfStrokeCS  def
+  /pdfStrokeXform {} def
+  /pdfFill 0 def
+  /pdfStroke 0 def
+  /pdfFillOP false def
+  /pdfStrokeOP false def
+  /pdfLastFill false def
+  /pdfLastStroke false def
+  /pdfTextMat 1 0 0 1 0 0 def
+  /pdfFontSize 0 def
+  /pdfCharSpacing 0 def
+  /pdfTextRender 0 def
+  /pdfPatternCS false def
+  /pdfTextRise 0 def
+  /pdfWordSpacing 0 def
+  /pdfHorizScaling 1 def
+  /pdfTextClipPath  def
+} def
+/pdfEndPage { end } def
+% PDF color state
+/cs { /pdfFillXform exch def dup /pdfFillCS exch def
+      setcolorspace } def
+/CS { /pdfStrokeXform exch def dup /pdfStrokeCS exch def
+      setcolorspace } def
+/sc { pdfLastFill not { pdfFillCS setcolorspace } if
+      dup /pdfFill exch def aload pop pdfFillXform setcolor
+     /pdfLastFill true def /pdfLastStroke false def } def
+/SC { pdfLastStroke not { pdfStrokeCS setcolorspace } if
+      dup /pdfStroke exch def aload pop pdfStrokeXform setcolor
+     /pdfLastStroke true def /pdfLastFill false def } def
+/op { /pdfFillOP exch def
+      pdfLastFill { pdfFillOP setoverprint } if } def
+/OP { /pdfStrokeOP exch def
+      pdfLastStroke { pdfStrokeOP setoverprint } if } def
+/fCol {
+  pdfLastFill not {
+    pdfFillCS setcolorspace
+    pdfFill aload pop pdfFillXform setcolor
+    pdfFillOP setoverprint
+    /pdfLastFill true def /pdfLastStroke false def
+  } if
+} def
+/sCol {
+  pdfLastStroke not {
+    pdfStrokeCS setcolorspace
+    pdfStroke aload pop pdfStrokeXform setcolor
+    pdfStrokeOP setoverprint
+    /pdfLastStroke true def /pdfLastFill false def
+  } if
+} def
+% build a font
+/pdfMakeFont {
+  4 3 roll findfont
+  4 2 roll matrix scale makefont
+  dup length dict begin
+    { 1 index /FID ne { def } { pop pop } ifelse } forall
+    /Encoding exch def
+    currentdict
+  end
+  definefont pop
+} def
+/pdfMakeFont16 {
+  exch findfont
+  dup length dict begin
+    { 1 index /FID ne { def } { pop pop } ifelse } forall
+    /WMode exch def
+    currentdict
+  end
+  definefont pop
+} def
+% graphics state operators
+/q { gsave pdfDictSize dict begin } def
+/Q {
+  end grestore
+  /pdfLastFill where {
+    pop
+    pdfLastFill {
+      pdfFillOP setoverprint
+    } {
+      pdfStrokeOP setoverprint
+    } ifelse
+  } if
+} def
+/cm { concat } def
+/d { setdash } def
+/i { setflat } def
+/j { setlinejoin } def
+/J { setlinecap } def
+/M { setmiterlimit } def
+/w { setlinewidth } def
+% path segment operators
+/m { moveto } def
+/l { lineto } def
+/c { curveto } def
+/re { 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto
+      neg 0 rlineto closepath } def
+/h { closepath } def
+% path painting operators
+/S { sCol stroke } def
+/Sf { fCol stroke } def
+/f { fCol fill } def
+/f* { fCol eofill } def
+% clipping operators
+/W { clip newpath } def
+/W* { eoclip newpath } def
+/Ws { strokepath clip newpath } def
+% text state operators
+/Tc { /pdfCharSpacing exch def } def
+/Tf { dup /pdfFontSize exch def
+      dup pdfHorizScaling mul exch matrix scale
+      pdfTextMat matrix concatmatrix dup 4 0 put dup 5 0 put
+      exch findfont exch makefont setfont } def
+/Tr { /pdfTextRender exch def } def
+/Tp { /pdfPatternCS exch def } def
+/Ts { /pdfTextRise exch def } def
+/Tw { /pdfWordSpacing exch def } def
+/Tz { /pdfHorizScaling exch def } def
+% text positioning operators
+/Td { pdfTextMat transform moveto } def
+/Tm { /pdfTextMat exch def } def
+% text string operators
+/xyshow where {
+  pop
+  /xyshow2 {
+    dup length array
+    0 2 2 index length 1 sub {
+      2 index 1 index 2 copy get 3 1 roll 1 add get
+      pdfTextMat dtransform
+      4 2 roll 2 copy 6 5 roll put 1 add 3 1 roll dup 4 2 roll put
+    } for
+    exch pop
+    xyshow
+  } def
+}{
+  /xyshow2 {
+    currentfont /FontType get 0 eq {
+      0 2 3 index length 1 sub {
+        currentpoint 4 index 3 index 2 getinterval show moveto
+        2 copy get 2 index 3 2 roll 1 add get

_service:tar_scm:bzip2-1.0.8.tar.gz/manual.xml Added

@@ -0,0 +1,2964 @@
+<?xml version="1.0"?> 
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+
+
+<!ENTITY % common-ents SYSTEM "entities.xml"> %common-ents;
+>
+
+<book lang="en" id="userman" xreflabel="bzip2 Manual">
+
+ <bookinfo>
+  <title>bzip2 and libbzip2, version &bz-version;</title>
+  <subtitle>A program and library for data compression</subtitle>
+  <copyright>
+   <year>&bz-lifespan;</year>
+   <holder>Julian Seward</holder>
+  </copyright>
+  <releaseinfo>Version &bz-version; of &bz-date;</releaseinfo>
+
+  <authorgroup>
+   <author>
+    <firstname>Julian</firstname>
+    <surname>Seward</surname>
+    <affiliation>
+     <orgname>&bz-url;</orgname>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <legalnotice id="legal">
+
+  <para>This program, <computeroutput>bzip2</computeroutput>, the
+  associated library <computeroutput>libbzip2</computeroutput>, and
+  all documentation, are copyright &copy; &bz-lifespan; Julian Seward.
+  All rights reserved.</para>
+
+  <para>Redistribution and use in source and binary forms, with
+  or without modification, are permitted provided that the
+  following conditions are met:</para>
+
+  <itemizedlist mark='bullet'>
+
+   <listitem><para>Redistributions of source code must retain the
+   above copyright notice, this list of conditions and the
+   following disclaimer.</para></listitem>
+
+   <listitem><para>The origin of this software must not be
+   misrepresented; you must not claim that you wrote the original
+   software.  If you use this software in a product, an
+   acknowledgment in the product documentation would be
+   appreciated but is not required.</para></listitem>
+
+   <listitem><para>Altered source versions must be plainly marked
+   as such, and must not be misrepresented as being the original
+   software.</para></listitem>
+
+   <listitem><para>The name of the author may not be used to
+   endorse or promote products derived from this software without
+   specific prior written permission.</para></listitem>
+
+  </itemizedlist>
+
+  <para>THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY
+  EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+  PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+  AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+  IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.</para>
+
+ <para>PATENTS: To the best of my knowledge,
+ <computeroutput>bzip2</computeroutput> and
+ <computeroutput>libbzip2</computeroutput> do not use any patented
+ algorithms.  However, I do not have the resources to carry
+ out a patent search.  Therefore I cannot give any guarantee of
+ the above statement.
+ </para>
+
+</legalnotice>
+
+</bookinfo>
+
+
+
+<chapter id="intro" xreflabel="Introduction">
+<title>Introduction</title>
+
+<para><computeroutput>bzip2</computeroutput> compresses files
+using the Burrows-Wheeler block-sorting text compression
+algorithm, and Huffman coding.  Compression is generally
+considerably better than that achieved by more conventional
+LZ77/LZ78-based compressors, and approaches the performance of
+the PPM family of statistical compressors.</para>
+
+<para><computeroutput>bzip2</computeroutput> is built on top of
+<computeroutput>libbzip2</computeroutput>, a flexible library for
+handling compressed data in the
+<computeroutput>bzip2</computeroutput> format.  This manual
+describes both how to use the program and how to work with the
+library interface.  Most of the manual is devoted to this
+library, not the program, which is good news if your interest is
+only in the program.</para>
+
+<itemizedlist mark='bullet'>
+
+ <listitem><para><xref linkend="using"/> describes how to use
+ <computeroutput>bzip2</computeroutput>; this is the only part
+ you need to read if you just want to know how to operate the
+ program.</para></listitem>
+
+ <listitem><para><xref linkend="libprog"/> describes the
+ programming interfaces in detail, and</para></listitem>
+
+ <listitem><para><xref linkend="misc"/> records some
+ miscellaneous notes which I thought ought to be recorded
+ somewhere.</para></listitem>
+
+</itemizedlist>
+
+</chapter>
+
+
+<chapter id="using" xreflabel="How to use bzip2">
+<title>How to use bzip2</title>
+
+<para>This chapter contains a copy of the
+<computeroutput>bzip2</computeroutput> man page, and nothing
+else.</para>
+
+<sect1 id="name" xreflabel="NAME">
+<title>NAME</title>
+
+<itemizedlist mark='bullet'>
+
+ <listitem><para><computeroutput>bzip2</computeroutput>,
+  <computeroutput>bunzip2</computeroutput> - a block-sorting file
+  compressor, v&bz-version;</para></listitem>
+
+ <listitem><para><computeroutput>bzcat</computeroutput> -
+   decompresses files to stdout</para></listitem>
+
+ <listitem><para><computeroutput>bzip2recover</computeroutput> -
+   recovers data from damaged bzip2 files</para></listitem>
+
+</itemizedlist>
+
+</sect1>
+
+
+<sect1 id="synopsis" xreflabel="SYNOPSIS">
+<title>SYNOPSIS</title>
+
+<itemizedlist mark='bullet'>
+
+ <listitem><para><computeroutput>bzip2</computeroutput> 
+  -cdfkqstvzVL123456789   filenames ...  </para></listitem>
+
+ <listitem><para><computeroutput>bunzip2</computeroutput> 
+  -fkvsVL   filenames ...  </para></listitem>
+
+ <listitem><para><computeroutput>bzcat</computeroutput>  -s  
+  filenames ...  </para></listitem>
+
+ <listitem><para><computeroutput>bzip2recover</computeroutput>
+  filename</para></listitem>
+
+</itemizedlist>
+
+</sect1>
+
+
+<sect1 id="description" xreflabel="DESCRIPTION">
+<title>DESCRIPTION</title>
+
+<para><computeroutput>bzip2</computeroutput> compresses files
+using the Burrows-Wheeler block sorting text compression
+algorithm, and Huffman coding.  Compression is generally
+considerably better than that achieved by more conventional
+LZ77/LZ78-based compressors, and approaches the performance of
+the PPM family of statistical compressors.</para>
+
+<para>The command-line options are deliberately very similar to
+those of GNU <computeroutput>gzip</computeroutput>, but they are
+not identical.</para>
+
+<para><computeroutput>bzip2</computeroutput> expects a list of
+file names to accompany the command-line flags.  Each file is
+replaced by a compressed version of itself, with the name
+<computeroutput>original_name.bz2</computeroutput>.  Each
+compressed file has the same modification date, permissions, and,
+when possible, ownership as the corresponding original, so that
+these properties can be correctly restored at decompression time.
+File name handling is naive in the sense that there is no
+mechanism for preserving original file names, permissions,

_service:tar_scm:bzip2-1.0.8.tar.gz/mk251.c Added

_service:tar_scm:bzip2-1.0.8.tar.gz/randtable.c Added

@@ -0,0 +1,84 @@
+
+/*-------------------------------------------------------------*/
+/*--- Table for randomising repetitive blocks               ---*/
+/*---                                           randtable.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------*/
+Int32 BZ2_rNums512 = { 
+   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
+   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
+   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
+   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
+   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
+   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
+   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
+   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
+   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
+   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
+   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
+   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
+   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
+   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
+   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
+   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
+   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
+   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
+   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
+   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
+   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
+   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
+   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
+   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
+   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
+   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
+   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
+   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
+   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
+   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
+   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
+   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
+   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
+   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
+   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
+   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
+   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
+   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
+   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
+   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
+   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
+   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
+   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
+   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
+   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
+   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
+   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
+   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
+   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
+   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
+   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
+   936, 638
+};
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                       randtable.c ---*/
+/*-------------------------------------------------------------*/

_service:tar_scm:bzip2-1.0.8.tar.gz/sample1.bz2 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/sample1.ref Added

_service:tar_scm:bzip2-1.0.8.tar.gz/sample2.bz2 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/sample2.ref Added

_service:tar_scm:bzip2-1.0.8.tar.gz/sample3.bz2 Added

@@ -0,0 +1,30007 @@
+This file is exceedingly boring.  If you find yourself
+reading it, please (1) take it from me that you can safely
+guess what the rest of the file says, and (2) seek professional
+help.
+
+ps.  there are no further sarcastic remarks in this file.
+
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh
+ugh

_service:tar_scm:bzip2-1.0.8.tar.gz/sample3.ref Added

_service:tar_scm:bzip2-1.0.8.tar.gz/spewG.c Added

@@ -0,0 +1,54 @@
+
+/* spew out a thoroughly gigantic file designed so that bzip2
+   can compress it reasonably rapidly.  This is to help test
+   support for large files (> 2GB) in a reasonable amount of time.
+   I suggest you use the undocumented --exponential option to
+   bzip2 when compressing the resulting file; this saves a bit of
+   time.  Note: *don't* bother with --exponential when compressing 
+   Real Files; it'll just waste a lot of CPU time :-)
+   (but is otherwise harmless).
+*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+	 ------------------------------------------------------------------ */
+
+
+#define _FILE_OFFSET_BITS 64
+
+#include <stdio.h>
+#include <stdlib.h>
+
+/* The number of megabytes of junk to spew out (roughly) */
+#define MEGABYTES 5000
+
+#define N_BUF 1000000
+char bufN_BUF;
+
+int main ( int argc, char** argv )
+{
+   int ii, kk, p;
+   srandom(1);
+   setbuffer ( stdout, buf, N_BUF );
+   for (kk = 0; kk < MEGABYTES * 515; kk+=3) {
+      p = 25+random()%50;
+      for (ii = 0; ii < p; ii++)
+         printf ( "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" );
+      for (ii = 0; ii < p-1; ii++)
+         printf ( "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb" );
+      for (ii = 0; ii < p+1; ii++)
+         printf ( "ccccccccccccccccccccccccccccccccccccc" );
+   }
+   fflush(stdout);
+   return 0;
+}

_service:tar_scm:bzip2-1.0.8.tar.gz/unzcrash.c Added

@@ -0,0 +1,141 @@
+
+/* A test program written to test robustness to decompression of
+   corrupted data.  Usage is 
+       unzcrash filename
+   and the program will read the specified file, compress it (in memory),
+   and then repeatedly decompress it, each time with a different bit of
+   the compressed data inverted, so as to test all possible one-bit errors.
+   This should not cause any invalid memory accesses.  If it does, 
+   I want to know about it!
+
+   PS.  As you can see from the above description, the process is
+   incredibly slow.  A file of size eg 5KB will cause it to run for
+   many hours.
+*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.8 of 13 July 2019
+   Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include <stdio.h>
+#include <assert.h>
+#include "bzlib.h"
+
+#define M_BLOCK 1000000
+
+typedef unsigned char uchar;
+
+#define M_BLOCK_OUT (M_BLOCK + 1000000)
+uchar inbufM_BLOCK;
+uchar outbufM_BLOCK_OUT;
+uchar zbufM_BLOCK + 600 + (M_BLOCK / 100);
+
+int nIn, nOut, nZ;
+
+static char *bzerrorstrings = {
+       "OK"
+      ,"SEQUENCE_ERROR"
+      ,"PARAM_ERROR"
+      ,"MEM_ERROR"
+      ,"DATA_ERROR"
+      ,"DATA_ERROR_MAGIC"
+      ,"IO_ERROR"
+      ,"UNEXPECTED_EOF"
+      ,"OUTBUFF_FULL"
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+};
+
+void flip_bit ( int bit )
+{
+   int byteno = bit / 8;
+   int bitno  = bit % 8;
+   uchar mask = 1 << bitno;
+   //fprintf ( stderr, "(byte %d  bit %d  mask %d)",
+   //          byteno, bitno, (int)mask );
+   zbufbyteno ^= mask;
+}
+
+int main ( int argc, char** argv )
+{
+   FILE* f;
+   int   r;
+   int   bit;
+   int   i;
+
+   if (argc != 2) {
+      fprintf ( stderr, "usage: unzcrash filename\n" );
+      return 1;
+   }
+
+   f = fopen ( argv1, "r" );
+   if (!f) {
+      fprintf ( stderr, "unzcrash: can't open %s\n", argv1 );
+      return 1;
+   }
+
+   nIn = fread ( inbuf, 1, M_BLOCK, f );
+   fprintf ( stderr, "%d bytes read\n", nIn );
+
+   nZ = M_BLOCK;
+   r = BZ2_bzBuffToBuffCompress (
+         zbuf, &nZ, inbuf, nIn, 9, 0, 30 );
+
+   assert (r == BZ_OK);
+   fprintf ( stderr, "%d after compression\n", nZ );
+
+   for (bit = 0; bit < nZ*8; bit++) {
+      fprintf ( stderr, "bit %d  ", bit );
+      flip_bit ( bit );
+      nOut = M_BLOCK_OUT;
+      r = BZ2_bzBuffToBuffDecompress (
+            outbuf, &nOut, zbuf, nZ, 0, 0 );
+      fprintf ( stderr, " %d  %s ", r, bzerrorstrings-r );
+
+      if (r != BZ_OK) {
+         fprintf ( stderr, "\n" );
+      } else {
+         if (nOut != nIn) {
+           fprintf(stderr, "nIn/nOut mismatch %d %d\n", nIn, nOut );
+           return 1;
+         } else {
+           for (i = 0; i < nOut; i++)
+             if (inbufi != outbufi) { 
+                fprintf(stderr, "mismatch at %d\n", i ); 
+                return 1; 
+           }
+           if (i == nOut) fprintf(stderr, "really ok!\n" );
+         }
+      }
+
+      flip_bit ( bit );
+   }
+
+#if 0
+   assert (nOut == nIn);
+   for (i = 0; i < nOut; i++) {
+     if (inbufi != outbufi) {
+        fprintf ( stderr, "difference at %d !\n", i );
+        return 1;
+     }
+   }
+#endif
+
+   fprintf ( stderr, "all ok\n" );
+   return 0;
+}

_service:tar_scm:bzip2-1.0.8.tar.gz/words0 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/words1 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/words2 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/words3 Added

_service:tar_scm:bzip2-1.0.8.tar.gz/xmlproc.sh Added

@@ -0,0 +1,114 @@
+#!/bin/bash
+# see the README file for usage etc.
+#
+# ------------------------------------------------------------------
+#  This file is part of bzip2/libbzip2, a program and library for
+#  lossless, block-sorting data compression.
+#
+#  bzip2/libbzip2 version 1.0.8 of 13 July 2019
+#  Copyright (C) 1996-2019 Julian Seward <jseward@acm.org>
+#
+#  Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+#  README file.
+#
+#  This program is released under the terms of the license contained
+#  in the file LICENSE.
+# ----------------------------------------------------------------
+
+
+usage() {
+  echo '';
+  echo 'Usage: xmlproc.sh -option <filename.xml>';
+  echo 'Specify a target from:';
+  echo '-v      verify xml file conforms to dtd';
+  echo '-html   output in html format (single file)';
+  echo '-ps     output in postscript format';
+  echo '-pdf    output in pdf format';
+  exit;
+}
+
+if test $# -ne 2; then
+  usage
+fi
+# assign the variable for the output type
+action=$1; shift
+# assign the output filename
+xmlfile=$1; shift
+# and check user input it correct
+if !(test -f $xmlfile); then
+  echo "No such file: $xmlfile";
+  exit;
+fi
+# some other stuff we will use
+OUT=output
+xsl_fo=bz-fo.xsl
+xsl_html=bz-html.xsl
+
+basename=$xmlfile
+basename=${basename//'.xml'/''}
+
+fofile="${basename}.fo"
+htmlfile="${basename}.html"
+pdffile="${basename}.pdf"
+psfile="${basename}.ps"
+xmlfmtfile="${basename}.fmt"
+
+# first process the xmlfile with CDATA tags
+./format.pl $xmlfile $xmlfmtfile
+# so the shell knows where the catalogs live
+export XML_CATALOG_FILES=/etc/xml/catalog
+
+# post-processing tidy up
+cleanup() {
+  echo "Cleaning up: $@" 
+  while  $# != 0 
+  do
+    arg=$1; shift;
+    echo "  deleting $arg";
+    rm $arg
+  done
+}
+
+case $action in
+  -v)
+   flags='--noout --xinclude --noblanks --postvalid'
+   dtd='--dtdvalid http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd'
+   xmllint $flags $dtd $xmlfmtfile 2> $OUT 
+   egrep 'error' $OUT 
+   rm $OUT
+  ;;
+
+  -html)
+   echo "Creating $htmlfile ..."
+   xsltproc --nonet --xinclude  -o $htmlfile $xsl_html $xmlfmtfile
+   cleanup $xmlfmtfile
+  ;;
+
+  -pdf)
+   echo "Creating $pdffile ..."
+   xsltproc --nonet --xinclude -o $fofile $xsl_fo $xmlfmtfile
+   pdfxmltex $fofile >$OUT </dev/null
+   pdfxmltex $fofile >$OUT </dev/null
+   pdfxmltex $fofile >$OUT </dev/null
+   cleanup $OUT $xmlfmtfile *.aux *.fo *.log *.out
+  ;;
+
+  -ps)
+   echo "Creating $psfile ..."
+   xsltproc --nonet --xinclude -o $fofile $xsl_fo $xmlfmtfile
+   pdfxmltex $fofile >$OUT </dev/null
+   pdfxmltex $fofile >$OUT </dev/null
+   pdfxmltex $fofile >$OUT </dev/null
+   pdftops $pdffile $psfile
+   cleanup $OUT $xmlfmtfile $pdffile *.aux *.fo *.log *.out
+#  passivetex is broken, so we can't go this route yet.
+#   xmltex $fofile >$OUT </dev/null
+#   xmltex $fofile >$OUT </dev/null
+#   xmltex $fofile >$OUT </dev/null
+#   dvips -R -q -o bzip-manual.ps *.dvi
+  ;;
+
+  *)
+  usage
+  ;;
+esac

_service:tar_scm:bzip2-1626960522.3959fd5.tar/. Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/0001-add-compile-option.patch Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/0002-CVE-2019-12900.patch Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/bzip2-1.0.8.tar.gz Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/bzip2.pc Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/bzip2.spec Deleted

_service:tar_scm:bzip2-1626960522.3959fd5.tar/bzip2.yaml Deleted

_service:tar_scm:bzip2.pc Added

_service:tar_scm:bzip2.yaml Added