File _service:obs_scm:iptables-config of Package iptables

# Load additional iptables modules (nat helpers)
#   Default: -none-
# Space separated list of nat helpers (e.g. 'ip_nat_ftp ip_nat_irc'), which
# are loaded after the firewall rules are applied. Options for the helpers are
# stored in /etc/modprobe.conf.
IPTABLES_MODULES=""

# Save current firewall rules on stop.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/iptables if firewall gets stopped
# (e.g. on system shutdown).
IPTABLES_SAVE_ON_STOP="no"

# Save current firewall rules on restart.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/iptables if firewall gets
# restarted.
IPTABLES_SAVE_ON_RESTART="no"

# Save (and restore) rule and chain counter.
#   Value: yes|no,  default: no
# Save counters for rules and chains to /etc/sysconfig/iptables if
# 'service iptables save' is called or on stop or restart if SAVE_ON_STOP or
# SAVE_ON_RESTART is enabled.
IPTABLES_SAVE_COUNTER="no"

# Numeric status output
#   Value: yes|no,  default: yes
# Print IP addresses and port numbers in numeric format in the status output.
IPTABLES_STATUS_NUMERIC="yes"

# Verbose status output
#   Value: yes|no,  default: yes
# Print info about the number of packets and bytes plus the "input-" and
# "outputdevice" in the status output.
IPTABLES_STATUS_VERBOSE="no"

# Status output with numbered lines
#   Value: yes|no,  default: yes
# Print a counter/number for every rule in the status output.
IPTABLES_STATUS_LINENUMBERS="yes"

# Reload sysctl settings on start and restart
#   Default: -none-
# Space separated list of sysctl items which are to be reloaded on start.
# List items will be matched by fgrep.
#IPTABLES_SYSCTL_LOAD_LIST=".nf_conntrack .bridge-nf"

# Set wait option for iptables-restore calls in seconds
#   Default: 600
# Set to 0 to deactivate the wait.
#IPTABLES_RESTORE_WAIT=600

# Set wait interval option for iptables-restore calls in microseconds
#   Default: 1000000
# Set to 100000 to try to get the lock every 100000 microseconds, 10 times a
# second.
# Only usable with IPTABLES_RESTORE_WAIT > 0
#IPTABLES_RESTORE_WAIT_INTERVAL=1000000