File _service:tar_scm:LoongArch-Use-finer-grained-DB... of Package gcc

File _service:tar_scm:LoongArch-Use-finer-grained-DBAR-hints.patch of Package gcc

From 4a70bfbf686c2b6a1ecd83fe851de826c612c3e0 Mon Sep 17 00:00:00 2001
From: Xi Ruoyao <xry111@xry111.site>
Date: Tue, 14 Nov 2023 05:32:38 +0800
Subject: [PATCH] LoongArch: Use finer-grained DBAR hints

LA664 defines DBAR hints 0x1 - 0x1f (except 0xf and 0x1f) as follows [1-2]:

- Bit 4: kind of constraint (0: completion, 1: ordering)
- Bit 3: barrier for previous read (0: true, 1: false)
- Bit 2: barrier for previous write (0: true, 1: false)
- Bit 1: barrier for succeeding read (0: true, 1: false)
- Bit 0: barrier for succeeding write (0: true, 1: false)

LLVM has already utilized them for different memory orders [3]:

- Bit 4 is always set to one because it's only intended to be zero for
  things like MMIO devices, which are out of the scope of memory orders.
- An acquire barrier is used to implement acquire loads like

ld.d $a1, $t0, 0
    dbar acquire_hint

where the load operation (ld.d) should not be reordered with any load
  or store operation after the acquire load.  To accomplish this
  constraint, we need to prevent the load operation from being reordered
  after the barrier, and also prevent any following load/store operation
  from being reordered before the barrier.  Thus bits 0, 1, and 3 must
  be zero, and bit 2 can be one, so acquire_hint should be 0b10100.
- An release barrier is used to implement release stores like

dbar release_hint
    st.d $a1, $t0, 0

where the store operation (st.d) should not be reordered with any load
  or store operation before the release store.  So we need to prevent
  the store operation from being reordered before the barrier, and also
  prevent any preceding load/store operation from being reordered after
  the barrier.  So bits 0, 2, 3 must be zero, and bit 1 can be one.  So
  release_hint should be 0b10010.

A similar mapping has been utilized for RISC-V GCC [4], LoongArch Linux
kernel [1], and LoongArch LLVM [3].  So the mapping should be correct.
And I've also bootstrapped & regtested GCC on a LA664 with this patch.

The LoongArch CPUs should treat "unknown" hints as dbar 0, so we can
unconditionally emit the new hints without a compiler switch.

[1]: https://git.kernel.org/torvalds/c/e031a5f3f1ed
[2]: https://github.com/loongson-community/docs/pull/12
[3]: https://github.com/llvm/llvm-project/pull/68787
[4]: https://gcc.gnu.org/r14-406

gcc/ChangeLog:

* config/loongarch/sync.md (mem_thread_fence): Remove redundant
	check.
	(mem_thread_fence_1): Emit finer-grained DBAR hints for
	different memory models, instead of 0.

Signed-off-by: ticat_fp <fanpeng@loongson.cn>
---
 gcc/config/loongarch/sync.md | 51 +++++++++++++++++++++++++++++-------
 1 file changed, 42 insertions(+), 9 deletions(-)

diff --git a/gcc/config/loongarch/sync.md b/gcc/config/loongarch/sync.md
index 9924d522bcd..1ad0c63e0d9 100644
--- a/gcc/config/loongarch/sync.md
+++ b/gcc/config/loongarch/sync.md
@@ -50,23 +50,56 @@
   [(match_operand:SI 0 "const_int_operand" "")] ;; model
   ""
 {
-  if (INTVAL (operands[0]) != MEMMODEL_RELAXED)
-    {
-      rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
-      MEM_VOLATILE_P (mem) = 1;
-      emit_insn (gen_mem_thread_fence_1 (mem, operands[0]));
-    }
+  rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
+  MEM_VOLATILE_P (mem) = 1;
+  emit_insn (gen_mem_thread_fence_1 (mem, operands[0]));
+
   DONE;
 })
 
-;; Until the LoongArch memory model (hence its mapping from C++) is finalized,
-;; conservatively emit a full FENCE.
+;; DBAR hint encoding for LA664 and later micro-architectures, paraphrased from
+;; the Linux patch revealing it [1]:
+;;
+;; - Bit 4: kind of constraint (0: completion, 1: ordering)
+;; - Bit 3: barrier for previous read (0: true, 1: false)
+;; - Bit 2: barrier for previous write (0: true, 1: false)
+;; - Bit 1: barrier for succeeding read (0: true, 1: false)
+;; - Bit 0: barrier for succeeding write (0: true, 1: false)
+;;
+;; [1]: https://git.kernel.org/torvalds/c/e031a5f3f1ed
+;;
+;; Implementations without support for the finer-granularity hints simply treat
+;; all as the full barrier (DBAR 0), so we can unconditionally start emiting the
+;; more precise hints right away.
 (define_insn "mem_thread_fence_1"
   [(set (match_operand:BLK 0 "" "")
 	(unspec:BLK [(match_dup 0)] UNSPEC_MEMORY_BARRIER))
    (match_operand:SI 1 "const_int_operand" "")] ;; model
   ""
-  "dbar\t0")
+  {
+    enum memmodel model = memmodel_base (INTVAL (operands[1]));
+
+    switch (model)
+      {
+      case MEMMODEL_ACQUIRE:
+	return "dbar\t0b10100";
+      case MEMMODEL_RELEASE:
+	return "dbar\t0b10010";
+      case MEMMODEL_ACQ_REL:
+      case MEMMODEL_SEQ_CST:
+	return "dbar\t0b10000";
+      default:
+	/* GCC internal: "For the '__ATOMIC_RELAXED' model no instructions
+	   need to be issued and this expansion is not invoked."
+
+	   __atomic builtins doc: "Consume is implemented using the
+	   stronger acquire memory order because of a deficiency in C++11's
+	   semantics."  See PR 59448 and get_memmodel in builtins.cc.
+
+	   Other values should not be returned by memmodel_base.  */
+	gcc_unreachable ();
+      }
+  })
 
 ;; Atomic memory operations.
 
-- 
2.33.0