File _service:download_src_package:rpm.spec of Package rpm

%define anolis_release 2
# run internal testsuite?
# fakechroot is severely broken, disable it
%bcond_with check

# build against xz?
%bcond_without xz
# build with plugins?
%bcond_without plugins
# build with libarchive? (needed for rpm2archive)
%bcond_without libarchive
# build with libimaevm.so
%bcond_without libimaevm
# build with fsverity support?
%bcond_with fsverity
# build with zstd support?
%bcond_without zstd
# build with ndb backend?
%bcond_without ndb
# build with sqlite support?
%bcond_without sqlite
# build with bdb_ro support?
%bcond_without bdb_ro

%define rpmhome /usr/lib/rpm

%global rpmver 4.18.0
%global sover 9

%global srcver %{rpmver}
%global srcdir rpm-%(echo %{rpmver} | cut -d'.' -f1-2).x

Summary: The RPM package management system
Name: rpm
Version: %{rpmver}
Release: %{anolis_release}%{?dist}
Url: http://www.rpm.org/
Source0: http://ftp.rpm.org/releases/%{srcdir}/rpm-%{srcver}.tar.bz2

Source10: rpmdb-rebuild.service

Source20: rpmdb-migrate.service
Source21: rpmdb_migrate

Patch0: rpm-4.17.x-rpm_dbpath.patch

# Partially GPL/LGPL dual-licensed and some bits with BSD
# SourceLicense: (GPLv2+ and LGPLv2+ with exceptions) and BSD
License: GPLv2+

Requires: coreutils
Requires: popt >= 1.10.2.1
Requires: curl
Obsoletes: python2-rpm < %{version}-%{release}

%if %{with check}
BuildRequires: fakechroot gnupg2
BuildRequires: debugedit >= 0.3
%endif

# XXX generally assumed to be installed but make it explicit as rpm
# is a bit special...
BuildRequires: system-rpm-config
BuildRequires: systemd-rpm-macros
BuildRequires: gcc make
BuildRequires: gawk
BuildRequires: elfutils-devel >= 0.112
BuildRequires: elfutils-libelf-devel
BuildRequires: readline-devel zlib-devel
BuildRequires: openssl-devel
# The popt version here just documents an older known-good version
BuildRequires: popt-devel >= 1.10.2
BuildRequires: file-devel
BuildRequires: gettext-devel
BuildRequires: ncurses-devel
BuildRequires: bzip2-devel >= 0.9.0c
BuildRequires: lua-devel >= 5.1
BuildRequires: libcap-devel
BuildRequires: libacl-devel
%if %{with xz}
BuildRequires: xz-devel >= 4.999.8
%endif
%if %{with libarchive}
BuildRequires: libarchive-devel
%endif
%if %{with zstd}
BuildRequires: libzstd-devel
%endif
%if %{with sqlite}
BuildRequires: sqlite-devel
%endif
# Couple of patches change makefiles so, require for now...
BuildRequires: automake libtool

# Temporary! Work around bugs in beta1 makefiles
BuildRequires: pandoc

%if %{with plugins}
BuildRequires: libselinux-devel
BuildRequires: dbus-devel
BuildRequires: audit-libs-devel
%endif

%if %{with libimaevm}
BuildRequires: ima-evm-utils-devel >= 1.0
%endif

%if %{with fsverity}
BuildRequires: fsverity-utils-devel
%endif

# For the rpmdb migration scriptlet (#2055033)
Requires(pre): coreutils
Requires(pre): findutils
Requires(pre): sed

%description
The RPM Package Manager (RPM) is a powerful command line driven
package management system capable of installing, uninstalling,
verifying, querying, and updating software packages. Each software
package consists of an archive of files along with information about
the package like its version, a description, etc.

%package libs
Summary:  Libraries for manipulating RPM packages
License: GPLv2+ and LGPLv2+ with exceptions
Requires: %{name} = %{version}-%{release}

%description libs
This package contains the RPM shared libraries.

%package build-libs
Summary:  Libraries for building RPM packages
License: GPLv2+ and LGPLv2+ with exceptions
Requires: rpm-libs = %{version}-%{release}

%description build-libs
This package contains the RPM shared libraries for building packages.

%package sign-libs
Summary:  Libraries for signing RPM packages
License: GPLv2+ and LGPLv2+ with exceptions
Requires: rpm-libs = %{version}-%{release}
Requires: %{_bindir}/gpg2

%description sign-libs
This package contains the RPM shared libraries for signing packages.

%package devel
Summary:  Development files for manipulating RPM packages
License: GPLv2+ and LGPLv2+ with exceptions
Requires: %{name} = %{version}-%{release}
Requires: %{name}-libs = %{version}-%{release}
Requires: %{name}-build-libs = %{version}-%{release}
Requires: %{name}-sign-libs = %{version}-%{release}
Requires: popt-devel

%description devel
This package contains the RPM C library and header files. These
development files will simplify the process of writing programs that
manipulate RPM packages and databases. These files are intended to
simplify the process of creating graphical package managers or any
other tools that need an intimate knowledge of RPM packages in order
to function.

This package should be installed if you want to develop programs that
will manipulate RPM packages and databases.

%package build
Summary: Scripts and executable programs used to build packages
Requires: rpm = %{version}-%{release}
Requires: elfutils >= 0.128 binutils
Requires: findutils sed grep gawk diffutils file patch >= 2.5
Requires: tar unzip gzip bzip2 cpio xz
%if %{with zstd}
Requires: zstd
%endif
Requires: debugedit >= 0.3
Requires: pkgconfig >= 1:0.24
Requires: /usr/bin/gdb-add-index
Suggests: gdb-minimal
Requires: system-rpm-config

%description build
The rpm-build package contains the scripts and executable programs
that are used to build packages using the RPM Package Manager.

%package sign
Summary: Package signing support
Requires: rpm-sign-libs = %{version}-%{release}

%description sign
This package contains support for digitally signing RPM packages.

%package -n python3-%{name}
Summary: Python 3 bindings for apps which will manipulate RPM packages
BuildRequires: python3-devel
%{?python_provide:%python_provide python3-%{name}}
Requires: %{name}-libs = %{version}-%{release}
Provides: %{name}-python3 = %{version}-%{release}
Obsoletes: %{name}-python3 < %{version}-%{release}
Obsoletes: platform-python-%{name} < %{version}-%{release}

%description -n python3-%{name}
The python3-rpm package contains a module that permits applications
written in the Python programming language to use the interface
supplied by RPM Package Manager libraries.

This package should be installed if you want to develop Python 3
programs that will manipulate RPM packages and databases.

%package apidocs
Summary: API documentation for RPM libraries
BuildArch: noarch

%description apidocs
This package contains API documentation for developing applications
that will manipulate RPM packages and databases.

%package cron
Summary: Create daily logs of installed packages.
BuildArch: noarch
Requires: crontabs logrotate rpm = %{version}-%{release}

%description cron
This package contains a cron job which creates daily logs of installed
packages on a system.

%if %{with plugins}
%package plugin-selinux
Summary: Rpm plugin for SELinux functionality
Requires: rpm-libs = %{version}-%{release}
Requires: selinux-policy-base

%description plugin-selinux
%{summary}.

%package plugin-syslog
Summary: Rpm plugin for syslog functionality
Requires: rpm-libs = %{version}-%{release}

%description plugin-syslog
%{summary}.

%package plugin-systemd-inhibit
Summary: Rpm plugin for systemd inhibit functionality
Requires: rpm-libs = %{version}-%{release}

%description plugin-systemd-inhibit
This plugin blocks systemd from entering idle, sleep or shutdown while an rpm
transaction is running using the systemd-inhibit mechanism.

%package plugin-ima
Summary: Rpm plugin ima file signatures
Requires: rpm-libs = %{version}-%{release}

%description plugin-ima
%{summary}.

%package plugin-prioreset
Summary: Rpm plugin for resetting scriptlet priorities for SysV init
Requires: rpm-libs = %{version}-%{release}

%description plugin-prioreset
%{summary}.

Useful on legacy SysV init systems if you run rpm transactions with
nice/ionice priorities. Should not be used on systemd systems.

%package plugin-audit
Summary: Rpm plugin for logging audit events on package operations
Requires: rpm-libs = %{version}-%{release}

%description plugin-audit
%{summary}.

%package plugin-fsverity
Summary: Rpm plugin for fsverity file signatures
Requires: rpm-libs = %{version}-%{release}

%description plugin-fsverity
%{summary}.

%package plugin-fapolicyd
Summary: Rpm plugin for fapolicyd support
Requires: rpm-libs = %{version}-%{release}
Provides: fapolicyd-plugin = %{version}-%{release}
# fapolicyd-dnf-plugin currently at 1.0.4
Obsoletes: fapolicyd-dnf-plugin < 1.0.5

%description plugin-fapolicyd
%{summary}.

See https://people.redhat.com/sgrubb/fapolicyd/ for information about
the fapolicyd daemon.

%package plugin-dbus-announce
Summary: Rpm plugin for announcing transactions on the DBUS
Requires: rpm-libs = %{version}-%{release}

%description plugin-dbus-announce
The plugin announces basic information about rpm transactions to the
system DBUS - like packages installed or removed.  Other programs can
subscribe to the signals to get notified when packages on the system
change.

# with plugins
%endif

%prep
%autosetup -n rpm-%{srcver} -p1

%build
%set_build_flags

autoreconf -i -f

# Hardening hack taken from macro %%configure defined in system-rpm-config
for i in $(find . -name ltmain.sh) ; do
     %{__sed} -i.backup -e 's~compiler_flags=$~compiler_flags="%{_hardened_ldflags}"~' $i
done;

# Using configure macro has some unwanted side-effects on rpm platform
# setup, use the old-fashioned way for now only defining minimal paths.
./configure \
    --prefix=%{_usr} \
    --sysconfdir=%{_sysconfdir} \
    --localstatedir=%{_var} \
    --sharedstatedir=%{_var}/lib \
    --libdir=%{_libdir} \
    --build=%{_target_platform} \
    --host=%{_target_platform} \
    --with-vendor=anolis \
    %{!?with_plugins: --disable-plugins} \
    --with-lua \
    --with-selinux \
    --with-cap \
    --with-acl \
    --with-fapolicyd \
    %{?with_ndb: --enable-ndb} \
    %{?with_libimaevm: --with-imaevm} \
    %{?with_fsverity: --with-fsverity} \
    %{?with_zstd: --enable-zstd} \
    %{?with_sqlite: --enable-sqlite} \
    %{?with_bdb_ro: --enable-bdb-ro} \
    --enable-python \
    --with-crypto=openssl

%make_build

pushd python
%py3_build
popd

%install
%make_install

# We need to build with --enable-python for the self-test suite, but we
# actually package the bindings built with setup.py (#531543#c26)
pushd python
%py3_install
popd

mkdir -p $RPM_BUILD_ROOT%{_unitdir}
install -m 644 %{SOURCE10} $RPM_BUILD_ROOT/%{_unitdir}
install -m 644 %{SOURCE20} $RPM_BUILD_ROOT/%{_unitdir}

mkdir -p $RPM_BUILD_ROOT%{rpmhome}
install -m 755 %{SOURCE21} $RPM_BUILD_ROOT/%{rpmhome}

# Save list of packages through cron
mkdir -p ${RPM_BUILD_ROOT}%{_sysconfdir}/cron.daily
install -m 755 scripts/rpm.daily ${RPM_BUILD_ROOT}%{_sysconfdir}/cron.daily/rpm

mkdir -p ${RPM_BUILD_ROOT}%{_sysconfdir}/logrotate.d
install -m 644 scripts/rpm.log ${RPM_BUILD_ROOT}%{_sysconfdir}/logrotate.d/rpm

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/rpm
mkdir -p $RPM_BUILD_ROOT%{rpmhome}/macros.d
mkdir -p $RPM_BUILD_ROOT/usr/lib/sysimage/rpm

# init an empty database for %ghost'ing for all supported backends
for be in %{?with_ndb:ndb} %{?with_sqlite:sqlite}; do
    ./rpmdb --define "_db_backend ${be}" --dbpath=${PWD}/${be} --initdb
    cp -va ${be}/. $RPM_BUILD_ROOT/usr/lib/sysimage/rpm/
done

# some packages invoke find-debuginfo directly, preserve compat for now
ln -s ../../bin/find-debuginfo $RPM_BUILD_ROOT/usr/lib/rpm/find-debuginfo.sh

%find_lang rpm

find $RPM_BUILD_ROOT -name "*.la"|xargs rm -f

# These live in perl-generators and python-rpm-generators now
rm -f $RPM_BUILD_ROOT/%{rpmhome}/{perldeps.pl,perl.*,pythond*}
rm -f $RPM_BUILD_ROOT/%{_fileattrsdir}/{perl*,python*}
rm -rf $RPM_BUILD_ROOT/var/tmp

%generate_compatibility_deps

%if %{with check}
%check
make check TESTSUITEFLAGS=-j%{_smp_build_ncpus} || (cat tests/rpmtests.log; exit 1)
# rpm >= 4.16.0 testsuite leaves a read-only tree behind, clean it up
make clean
%endif

%pre
# Symlink all rpmdb files to the new location if we're still using /var/lib/rpm
if [ -d /var/lib/rpm ]; then
    mkdir -p /usr/lib/sysimage/rpm
    rpmdb_files=$(find /var/lib/rpm -maxdepth 1 -type f | sed 's|^/var/lib/rpm/||g' | sort)
    for rpmdb_file in ${rpmdb_files[@]}; do
        ln -sfr /var/lib/rpm/${rpmdb_file} /usr/lib/sysimage/rpm/${rpmdb_file}
    done
fi

%triggerun -- rpm < 4.17.0
# Handle rpmdb migrate service on erasure of old to avoid ordering issues
if [ -x /usr/bin/systemctl ]; then
    systemctl --no-reload preset rpmdb-migrate ||:
fi

%posttrans
if [ -d /var/lib/rpm ]; then
    touch /var/lib/rpm/.migratedb
fi

%files -f rpm.lang
%license COPYING
%doc CREDITS docs/manual/[a-z]*

%{_unitdir}/rpmdb-rebuild.service
%{_unitdir}/rpmdb-migrate.service

%dir %{_sysconfdir}/rpm

%attr(0755, root, root) %dir /usr/lib/sysimage/rpm
%attr(0644, root, root) %ghost %config(missingok,noreplace) /usr/lib/sysimage/rpm/*
%attr(0644, root, root) %ghost /usr/lib/sysimage/rpm/.*.lock

%{_bindir}/rpm
%{_bindir}/rpm2archive
%{_bindir}/rpm2cpio
%{_bindir}/rpmdb
%{_bindir}/rpmkeys
%{_bindir}/rpmquery
%{_bindir}/rpmverify
%{abidir}/rpm*-option.list
%exclude %{abidir}/rpmsign-option.list
%exclude %{abidir}/rpmbuild-option.list
%exclude %{abidir}/rpmspec-option.list
%exclude %{abidir}/rpmlua-option.list

%{_mandir}/man8/rpm.8*
%{_mandir}/man8/rpmdb.8*
%{_mandir}/man8/rpmkeys.8*
%{_mandir}/man8/rpm2archive.8*
%{_mandir}/man8/rpm2cpio.8*
%{_mandir}/man8/rpm-misc.8*
%{_mandir}/man8/rpm-plugins.8*

# XXX this places translated manuals to wrong package wrt eg rpmbuild
%lang(fr) %{_mandir}/fr/man[18]/*.[18]*
%lang(ko) %{_mandir}/ko/man[18]/*.[18]*
%lang(ja) %{_mandir}/ja/man[18]/*.[18]*
%lang(pl) %{_mandir}/pl/man[18]/*.[18]*
%lang(ru) %{_mandir}/ru/man[18]/*.[18]*
%lang(sk) %{_mandir}/sk/man[18]/*.[18]*

%attr(0755, root, root) %dir %{rpmhome}
%{rpmhome}/macros
%{rpmhome}/macros.d
%{rpmhome}/lua
%{rpmhome}/rpmpopt*
%{rpmhome}/rpmrc

%{rpmhome}/rpmdb_*
%{rpmhome}/rpm.daily
%{rpmhome}/rpm.log
%{rpmhome}/rpm.supp
%{rpmhome}/rpm2cpio.sh
%{rpmhome}/tgpg

%{rpmhome}/platform

%dir %{rpmhome}/fileattrs

%{abidir}/_rpm*.dump

%files libs
%dir %{abidir}
%{_libdir}/librpmio.so.%{sover}
%{_libdir}/librpm.so.%{sover}
%{_libdir}/librpmio.so.%{sover}.*
%{_libdir}/librpm.so.%{sover}.*
%{abidir}/librpm*.dump
%exclude %{abidir}/librpmbuild*.dump
%exclude %{abidir}/librpmsign*.dump
%if %{with plugins}
%dir %{_libdir}/rpm-plugins

%files plugin-syslog
%{_libdir}/rpm-plugins/syslog.so
%{abidir}/syslog.dump
%{_mandir}/man8/rpm-plugin-syslog.8*

%files plugin-selinux
%{_libdir}/rpm-plugins/selinux.so
%{abidir}/selinux.dump
%{_mandir}/man8/rpm-plugin-selinux.8*

%files plugin-systemd-inhibit
%{_libdir}/rpm-plugins/systemd_inhibit.so
%{abidir}/systemd_inhibit.dump
%{_mandir}/man8/rpm-plugin-systemd-inhibit.8*

%files plugin-ima
%{_libdir}/rpm-plugins/ima.so
%{abidir}/ima.dump
%{_mandir}/man8/rpm-plugin-ima.8*

%files plugin-fsverity
%{_libdir}/rpm-plugins/fsverity.so
%{abidir}/fsverity.dump

%files plugin-fapolicyd
%{_libdir}/rpm-plugins/fapolicyd.so
%{abidir}/fapolicyd.dump
%{_mandir}/man8/rpm-plugin-fapolicyd.8*

%files plugin-prioreset
%{_libdir}/rpm-plugins/prioreset.so
%{abidir}/prioreset.dump
%{_mandir}/man8/rpm-plugin-prioreset.8*

%files plugin-audit
%{_libdir}/rpm-plugins/audit.so
%{abidir}/audit.dump
%{_mandir}/man8/rpm-plugin-audit.8*
# with plugins

%files plugin-dbus-announce
%{_libdir}/rpm-plugins/dbus_announce.so
%{abidir}/dbus_announce.dump
%{_mandir}/man8/rpm-plugin-dbus-announce.8*
%{_sysconfdir}/dbus-1/system.d/org.rpm.conf
%endif

%files build-libs
%{_libdir}/librpmbuild.so.%{sover}
%{_libdir}/librpmbuild.so.%{sover}.*
%{abidir}/librpmbuild*.dump

%files sign-libs
%{_libdir}/librpmsign.so.%{sover}
%{_libdir}/librpmsign.so.%{sover}.*
%{abidir}/librpmsign*.dump

%files build
%{_bindir}/rpmbuild
%{_bindir}/gendiff
%{_bindir}/rpmspec
%{_bindir}/rpmlua
%{abidir}/rpmbuild-option.list
%{abidir}/gendiff-option.list
%{abidir}/rpmspec-option.list
%{abidir}/rpmlua-option.list

%{_mandir}/man1/gendiff.1*
%{_mandir}/man8/rpmbuild.8*
%{_mandir}/man8/rpmdeps.8*
%{_mandir}/man8/rpmspec.8*
%{_mandir}/man8/rpmlua.8*

%{rpmhome}/brp-*
%{rpmhome}/check-*
%{rpmhome}/find-lang.sh
%{rpmhome}/*provides*
%{rpmhome}/*requires*
%{rpmhome}/*deps*
%{rpmhome}/*.prov
%{rpmhome}/*.req
%{rpmhome}/mkinstalldirs
%{rpmhome}/fileattrs/*
%{rpmhome}/find-debuginfo.sh
%{rpmhome}/rpmuncompress

%files sign
%{_bindir}/rpmsign
%{abidir}/rpmsign-option.list
%{_mandir}/man8/rpmsign.8*

%files -n python3-%{name}
%{python3_sitearch}/rpm/
%{python3_sitearch}/rpm-%{rpmver}*.egg-info

%files devel
%{_mandir}/man8/rpmgraph.8*
%{_bindir}/rpmgraph
%{abidir}/rpmgraph-option.list
%{_libdir}/librp*[a-z].so
%{_libdir}/pkgconfig/rpm.pc
%{_includedir}/rpm/

%files cron
%{_sysconfdir}/cron.daily/rpm
%config(noreplace) %{_sysconfdir}/logrotate.d/rpm

%files apidocs
%license COPYING
%doc docs/librpm/html/*

%changelog
* Thu Oct 13 2022 mgb01105731 <mgb01105731@alibaba-inc.com> - 4.18.0-2
- optimise spec file

* Tue Sep 27 2022 mgb01105731 <mgb01105731@alibaba-inc.com> - 4.18.0-1
- update to 4.18.0

* Tue Mar 22 2022 Chunmei Xu <xuchunmei@linux.alibaba.com> - 4.17.0-4
- disable fsverity

* Wed Mar 09 2022 Chunmei Xu <xuchunmei@linux.alibaba.com> - 4.17.0-3
- Rebuild with new python macros

* Wed Mar 09 2022 Chunmei Xu <xuchunmei@linux.alibaba.com> - 4.17.0-2
- Bump version to rebuild

* Mon Feb 28 2022 Chunmei Xu <xuchunmei@linux.alibaba.com> - 4.17.0-1
- upstream version 4.17.0 and migrate rpmdb to /usr/lib/sysimage/rpm