File _service:tar_scm:Backport-aarch64-support-BTI-a... of Package openssl

File _service:tar_scm:Backport-aarch64-support-BTI-and-pointer-authentication-in-as.patch of Package openssl (Revision d474a74717cc76625b8579a29ba04662)

Currently displaying revision d474a74717cc76625b8579a29ba04662 , Show latest

From 44b6e3d07ae5b09255710986e61035c862ec68aa Mon Sep 17 00:00:00 2001
From: Russ Butler <russ.butler@arm.com>
Date: Sat, 28 Aug 2021 13:57:09 -0500
Subject: [PATCH 01/13] aarch64: support BTI and pointer authentication in
 assembly

This change adds optional support for
- Armv8.3-A Pointer Authentication (PAuth) and
- Armv8.5-A Branch Target Identification (BTI)
features to the perl scripts.

Both features can be enabled with additional compiler flags.
Unless any of these are enabled explicitly there is no code change at
all.

The extensions are briefly described below. Please read the appropriate
chapters of the Arm Architecture Reference Manual for the complete
specification.

Scope
-----

This change only affects generated assembly code.

Armv8.3-A Pointer Authentication
--------------------------------

Pointer Authentication extension supports the authentication of the
contents of registers before they are used for indirect branching
or load.

PAuth provides a probabilistic method to detect corruption of register
values. PAuth signing instructions generate a Pointer Authentication
Code (PAC) based on the value of a register, a seed and a key.
The generated PAC is inserted into the original value in the register.
A PAuth authentication instruction recomputes the PAC, and if it matches
the PAC in the register, restores its original value. In case of a
mismatch, an architecturally unmapped address is generated instead.

With PAuth, mitigation against ROP (Return-oriented Programming) attacks
can be implemented. This is achieved by signing the contents of the
link-register (LR) before it is pushed to stack. Once LR is popped,
it is authenticated. This way a stack corruption which overwrites the
LR on the stack is detectable.

The PAuth extension adds several new instructions, some of which are not
recognized by older hardware. To support a single codebase for both pre
Armv8.3-A targets and newer ones, only NOP-space instructions are added
by this patch. These instructions are treated as NOPs on hardware
which does not support Armv8.3-A. Furthermore, this patch only considers
cases where LR is saved to the stack and then restored before branching
to its content. There are cases in the code where LR is pushed to stack
but it is not used later. We do not address these cases as they are not
affected by PAuth.

There are two keys available to sign an instruction address: A and B.
PACIASP and PACIBSP only differ in the used keys: A and B, respectively.
The keys are typically managed by the operating system.

To enable generating code for PAuth compile with
-mbranch-protection=<mode>:

- standard or pac-ret: add PACIASP and AUTIASP, also enables BTI
  (read below)
- pac-ret+b-key: add PACIBSP and AUTIBSP

Armv8.5-A Branch Target Identification
--------------------------------------

Branch Target Identification features some new instructions which
protect the execution of instructions on guarded pages which are not
intended branch targets.

If Armv8.5-A is supported by the hardware, execution of an instruction
changes the value of PSTATE.BTYPE field. If an indirect branch
lands on a guarded page the target instruction must be one of the
BTI <jc> flavors, or in case of a direct call or jump it can be any
other instruction. If the target instruction is not compatible with the
value of PSTATE.BTYPE a Branch Target Exception is generated.

In short, indirect jumps are compatible with BTI <j> and <jc> while
indirect calls are compatible with BTI <c> and <jc>. Please refer to the
specification for the details.

Armv8.3-A PACIASP and PACIBSP are implicit branch target
identification instructions which are equivalent with BTI c or BTI jc
depending on system register configuration.

BTI is used to mitigate JOP (Jump-oriented Programming) attacks by
limiting the set of instructions which can be jumped to.

BTI requires active linker support to mark the pages with BTI-enabled
code as guarded. For ELF64 files BTI compatibility is recorded in the
.note.gnu.property section. For a shared object or static binary it is
required that all linked units support BTI. This means that even a
single assembly file without the required note section turns-off BTI
for the whole binary or shared object.

The new BTI instructions are treated as NOPs on hardware which does
not support Armv8.5-A or on pages which are not guarded.

To insert this new and optional instruction compile with
-mbranch-protection=standard (also enables PAuth) or +bti.

When targeting a guarded page from a non-guarded page, weaker
compatibility restrictions apply to maintain compatibility between
legacy and new code. For detailed rules please refer to the Arm ARM.

Compiler support
----------------

Compiler support requires understanding '-mbranch-protection=<mode>'
and emitting the appropriate feature macros (__ARM_FEATURE_BTI_DEFAULT
and __ARM_FEATURE_PAC_DEFAULT). The current state is the following:

-------------------------------------------------------
| Compiler | -mbranch-protection | Feature macros     |
+----------+---------------------+--------------------+
| clang    | 9.0.0               | 11.0.0             |
+----------+---------------------+--------------------+
| gcc      | 9                   | expected in 10.1+  |
-------------------------------------------------------

Available Platforms
------------------

Arm Fast Model and QEMU support both extensions.

https://developer.arm.com/tools-and-software/simulation-models/fast-models
https://www.qemu.org/

Implementation Notes
--------------------

This change adds BTI landing pads even to assembly functions which are
likely to be directly called only. In these cases, landing pads might
be superfluous depending on what code the linker generates.
Code size and performance impact for these cases would be negligible.

Interaction with C code
-----------------------

Pointer Authentication is a per-frame protection while Branch Target
Identification can be turned on and off only for all code pages of a
whole shared object or static binary. Because of these properties if
C/C++ code is compiled without any of the above features but assembly
files support any of them unconditionally there is no incompatibility
between the two.

Useful Links
------------

To fully understand the details of both PAuth and BTI it is advised to
read the related chapters of the Arm Architecture Reference Manual
(Arm ARM):
https://developer.arm.com/documentation/ddi0487/latest/

Additional materials:

"Providing protection for complex software"
https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software

Arm Compiler Reference Guide Version 6.14: -mbranch-protection
https://developer.arm.com/documentation/101754/0614/armclang-Reference/armclang-Command-line-Options/-mbranch-protection?lang=en

Arm C Language Extensions (ACLE)
https://developer.arm.com/docs/101028/latest

Addional Notes
--------------

This patch is a copy of the work done by Tamas Petz in boringssl. It
contains the changes from the following commits:

aarch64: support BTI and pointer authentication in assembly
    Change-Id: I4335f92e2ccc8e209c7d68a0a79f1acdf3aeb791
    URL: https://boringssl-review.googlesource.com/c/boringssl/+/42084
aarch64: Improve conditional compilation
    Change-Id: I14902a64e5f403c2b6a117bc9f5fb1a4f4611ebf
    URL: https://boringssl-review.googlesource.com/c/boringssl/+/43524
aarch64: Fix name of gnu property note section
    Change-Id: I6c432d1c852129e9c273f6469a8b60e3983671ec
    URL: https://boringssl-review.googlesource.com/c/boringssl/+/44024

Change-Id: I2d95ebc5e4aeb5610d3b226f9754ee80cf74a9af

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16674)
---
 crypto/aes/asm/aesv8-armx.pl          | 18 +++++++-
 crypto/aes/asm/vpaes-armv8.pl         | 39 ++++++++--------
 crypto/aes/build.info                 |  1 +
 crypto/arm64cpuid.pl                  | 10 +++++
 crypto/arm_arch.h                     | 58 ++++++++++++++++++++++++
 crypto/bn/asm/armv8-mont.pl           | 19 +++++---
 crypto/chacha/asm/chacha-armv8.pl     | 18 ++++----
 crypto/ec/asm/ecp_nistz256-armv8.pl   | 64 ++++++++++++++++-----------
 crypto/modes/asm/aes-gcm-armv8_64.pl  |  6 +++
 crypto/modes/asm/ghashv8-armx.pl      | 11 +++++
 crypto/poly1305/asm/poly1305-armv8.pl | 17 ++++++-
 crypto/sha/asm/keccak1600-armv8.pl    | 30 +++++++------
 crypto/sha/asm/sha1-armv8.pl          |  5 ++-
 crypto/sha/asm/sha512-armv8.pl        | 11 +++--
 crypto/sha/build.info                 |  1 +
 15 files changed, 228 insertions(+), 80 deletions(-)

diff --git a/crypto/aes/asm/aesv8-armx.pl b/crypto/aes/asm/aesv8-armx.pl
index 6a7bf05d1b..ed5ae4207c 100755
--- a/crypto/aes/asm/aesv8-armx.pl
+++ b/crypto/aes/asm/aesv8-armx.pl
@@ -120,6 +120,8 @@ ${prefix}_set_encrypt_key:
 .Lenc_key:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 ___
@@ -295,7 +297,7 @@ $code.=<<___;
 ${prefix}_set_decrypt_key:
 ___
 $code.=<<___	if ($flavour =~ /64/);
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 ___
@@ -339,7 +341,7 @@ $code.=<<___	if ($flavour !~ /64/);
 ___
 $code.=<<___	if ($flavour =~ /64/);
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 ___
 $code.=<<___;
@@ -359,6 +361,11 @@ $code.=<<___;
 .type	${prefix}_${dir}crypt,%function
 .align	5
 ${prefix}_${dir}crypt:
+___
+$code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+___
+$code.=<<___;
 	ldr	$rounds,[$key,#240]
 	vld1.32	{$rndkey0},[$key],#16
 	vld1.8	{$inout},[$inp]
@@ -442,6 +449,7 @@ $code.=<<___;
 ${prefix}_ecb_encrypt:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
 	subs	$len,$len,#16
 	// Original input data size bigger than 16, jump to big size processing.
 	b.ne    .Lecb_big_size
@@ -1236,6 +1244,8 @@ $code.=<<___;
 ${prefix}_cbc_encrypt:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 ___
@@ -1764,6 +1774,8 @@ $code.=<<___;
 ${prefix}_ctr32_encrypt_blocks:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp		x29,x30,[sp,#-16]!
 	add		x29,sp,#0
 ___
@@ -2256,6 +2268,7 @@ $code.=<<___	if ($flavour =~ /64/);
 ${prefix}_xts_encrypt:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
 	cmp	$len,#16
 	// Original input data size bigger than 16, jump to big size processing.
 	b.ne	.Lxts_enc_big_size
@@ -2930,6 +2943,7 @@ $code.=<<___	if ($flavour =~ /64/);
 .type	${prefix}_xts_decrypt,%function
 .align	5
 ${prefix}_xts_decrypt:
+	AARCH64_VALID_CALL_TARGET
 ___
 $code.=<<___	if ($flavour =~ /64/);
 	cmp	$len,#16
diff --git a/crypto/aes/asm/vpaes-armv8.pl b/crypto/aes/asm/vpaes-armv8.pl
index dcd5065e68..49988e9c2b 100755
--- a/crypto/aes/asm/vpaes-armv8.pl
+++ b/crypto/aes/asm/vpaes-armv8.pl
@@ -53,6 +53,8 @@ open OUT,"| \"$^X\" $xlate $flavour \"$output\""
 *STDOUT=*OUT;
 
 $code.=<<___;
+#include "arm_arch.h"
+
 .text
 
 .type	_vpaes_consts,%object
@@ -259,7 +261,7 @@ _vpaes_encrypt_core:
 .type	vpaes_encrypt,%function
 .align	4
 vpaes_encrypt:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -269,7 +271,7 @@ vpaes_encrypt:
 	st1	{v0.16b}, [$out]
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_encrypt,.-vpaes_encrypt
 
@@ -492,7 +494,7 @@ _vpaes_decrypt_core:
 .type	vpaes_decrypt,%function
 .align	4
 vpaes_decrypt:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -502,7 +504,7 @@ vpaes_decrypt:
 	st1	{v0.16b}, [$out]
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_decrypt,.-vpaes_decrypt
 
@@ -673,7 +675,7 @@ _vpaes_key_preheat:
 .type	_vpaes_schedule_core,%function
 .align	4
 _vpaes_schedule_core:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29, x30, [sp,#-16]!
 	add	x29,sp,#0
 
@@ -838,7 +840,7 @@ _vpaes_schedule_core:
 	eor	v6.16b, v6.16b, v6.16b		// vpxor	%xmm6,	%xmm6,	%xmm6
 	eor	v7.16b, v7.16b, v7.16b		// vpxor	%xmm7,	%xmm7,	%xmm7
 	ldp	x29, x30, [sp],#16
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	_vpaes_schedule_core,.-_vpaes_schedule_core
 
@@ -1051,7 +1053,7 @@ _vpaes_schedule_mangle:
 .type	vpaes_set_encrypt_key,%function
 .align	4
 vpaes_set_encrypt_key:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#-16]!	// ABI spec says so
@@ -1067,7 +1069,7 @@ vpaes_set_encrypt_key:
 
 	ldp	d8,d9,[sp],#16
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_set_encrypt_key,.-vpaes_set_encrypt_key
 
@@ -1075,7 +1077,7 @@ vpaes_set_encrypt_key:
 .type	vpaes_set_decrypt_key,%function
 .align	4
 vpaes_set_decrypt_key:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#-16]!	// ABI spec says so
@@ -1095,7 +1097,7 @@ vpaes_set_decrypt_key:
 
 	ldp	d8,d9,[sp],#16
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_set_decrypt_key,.-vpaes_set_decrypt_key
 ___
@@ -1108,11 +1110,11 @@ $code.=<<___;
 .type	vpaes_cbc_encrypt,%function
 .align	4
 vpaes_cbc_encrypt:
+	AARCH64_SIGN_LINK_REGISTER
 	cbz	$len, .Lcbc_abort
 	cmp	w5, #0			// check direction
 	b.eq	vpaes_cbc_decrypt
 
-	.inst	0xd503233f		// paciasp
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -1135,15 +1137,16 @@ vpaes_cbc_encrypt:
 	st1	{v0.16b}, [$ivec]	// write ivec
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
 .Lcbc_abort:
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_cbc_encrypt,.-vpaes_cbc_encrypt
 
 .type	vpaes_cbc_decrypt,%function
 .align	4
 vpaes_cbc_decrypt:
-	.inst	0xd503233f		// paciasp
+	// Not adding AARCH64_SIGN_LINK_REGISTER here because vpaes_cbc_decrypt is jumped to
+	// only from vpaes_cbc_encrypt which has already signed the return address.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#-16]!	// ABI spec says so
@@ -1185,7 +1188,7 @@ vpaes_cbc_decrypt:
 	ldp	d10,d11,[sp],#16
 	ldp	d8,d9,[sp],#16
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_cbc_decrypt,.-vpaes_cbc_decrypt
 ___
@@ -1195,7 +1198,7 @@ $code.=<<___;
 .type	vpaes_ecb_encrypt,%function
 .align	4
 vpaes_ecb_encrypt:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#-16]!	// ABI spec says so
@@ -1229,7 +1232,7 @@ vpaes_ecb_encrypt:
 	ldp	d10,d11,[sp],#16
 	ldp	d8,d9,[sp],#16
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_ecb_encrypt,.-vpaes_ecb_encrypt
 
@@ -1237,7 +1240,7 @@ vpaes_ecb_encrypt:
 .type	vpaes_ecb_decrypt,%function
 .align	4
 vpaes_ecb_decrypt:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#-16]!	// ABI spec says so
@@ -1271,7 +1274,7 @@ vpaes_ecb_decrypt:
 	ldp	d10,d11,[sp],#16
 	ldp	d8,d9,[sp],#16
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	vpaes_ecb_decrypt,.-vpaes_ecb_decrypt
 ___
diff --git a/crypto/aes/build.info b/crypto/aes/build.info
index b250903fa6..47f99fdf33 100644
--- a/crypto/aes/build.info
+++ b/crypto/aes/build.info
@@ -116,6 +116,7 @@ INCLUDE[aes-mips.o]=..
 GENERATE[aesv8-armx.S]=asm/aesv8-armx.pl
 INCLUDE[aesv8-armx.o]=..
 GENERATE[vpaes-armv8.S]=asm/vpaes-armv8.pl
+INCLUDE[vpaes-armv8.o]=..
 
 GENERATE[aes-armv4.S]=asm/aes-armv4.pl
 INCLUDE[aes-armv4.o]=..
diff --git a/crypto/arm64cpuid.pl b/crypto/arm64cpuid.pl
index ac76dd449f..11f0e50279 100755
--- a/crypto/arm64cpuid.pl
+++ b/crypto/arm64cpuid.pl
@@ -31,6 +31,7 @@ $code.=<<___;
 .globl	_armv7_neon_probe
 .type	_armv7_neon_probe,%function
 _armv7_neon_probe:
+	AARCH64_VALID_CALL_TARGET
 	orr	v15.16b, v15.16b, v15.16b
 	ret
 .size	_armv7_neon_probe,.-_armv7_neon_probe
@@ -38,6 +39,7 @@ _armv7_neon_probe:
 .globl	_armv7_tick
 .type	_armv7_tick,%function
 _armv7_tick:
+	AARCH64_VALID_CALL_TARGET
 #ifdef	__APPLE__
 	mrs	x0, CNTPCT_EL0
 #else
@@ -49,6 +51,7 @@ _armv7_tick:
 .globl	_armv8_aes_probe
 .type	_armv8_aes_probe,%function
 _armv8_aes_probe:
+	AARCH64_VALID_CALL_TARGET
 	aese	v0.16b, v0.16b
 	ret
 .size	_armv8_aes_probe,.-_armv8_aes_probe
@@ -56,6 +59,7 @@ _armv8_aes_probe:
 .globl	_armv8_sha1_probe
 .type	_armv8_sha1_probe,%function
 _armv8_sha1_probe:
+	AARCH64_VALID_CALL_TARGET
 	sha1h	s0, s0
 	ret
 .size	_armv8_sha1_probe,.-_armv8_sha1_probe
@@ -63,6 +67,7 @@ _armv8_sha1_probe:
 .globl	_armv8_sha256_probe
 .type	_armv8_sha256_probe,%function
 _armv8_sha256_probe:
+	AARCH64_VALID_CALL_TARGET
 	sha256su0	v0.4s, v0.4s
 	ret
 .size	_armv8_sha256_probe,.-_armv8_sha256_probe
@@ -70,6 +75,7 @@ _armv8_sha256_probe:
 .globl	_armv8_pmull_probe
 .type	_armv8_pmull_probe,%function
 _armv8_pmull_probe:
+	AARCH64_VALID_CALL_TARGET
 	pmull	v0.1q, v0.1d, v0.1d
 	ret
 .size	_armv8_pmull_probe,.-_armv8_pmull_probe
@@ -77,6 +83,7 @@ _armv8_pmull_probe:
 .globl	_armv8_sha512_probe
 .type	_armv8_sha512_probe,%function
 _armv8_sha512_probe:
+	AARCH64_VALID_CALL_TARGET
 	.long	0xcec08000	// sha512su0	v0.2d,v0.2d
 	ret
 .size	_armv8_sha512_probe,.-_armv8_sha512_probe
@@ -84,6 +91,7 @@ _armv8_sha512_probe:
 .globl	_armv8_cpuid_probe
 .type	_armv8_cpuid_probe,%function
 _armv8_cpuid_probe:
+	AARCH64_VALID_CALL_TARGET
 	mrs	x0, midr_el1
 	ret
 .size	_armv8_cpuid_probe,.-_armv8_cpuid_probe
@@ -92,6 +100,7 @@ _armv8_cpuid_probe:
 .type	OPENSSL_cleanse,%function
 .align	5
 OPENSSL_cleanse:
+	AARCH64_VALID_CALL_TARGET
 	cbz	x1,.Lret	// len==0?
 	cmp	x1,#15
 	b.hi	.Lot		// len>15
@@ -123,6 +132,7 @@ OPENSSL_cleanse:
 .type	CRYPTO_memcmp,%function
 .align	4
 CRYPTO_memcmp:
+	AARCH64_VALID_CALL_TARGET
 	eor	w3,w3,w3
 	cbz	x2,.Lno_data	// len==0?
 	cmp	x2,#16
diff --git a/crypto/arm_arch.h b/crypto/arm_arch.h
index 45d7e15564..a815a5c72b 100644
--- a/crypto/arm_arch.h
+++ b/crypto/arm_arch.h
@@ -126,4 +126,62 @@ extern unsigned int OPENSSL_armv8_rsa_neonized;
 
 # define MIDR_IS_CPU_MODEL(midr, imp, partnum) \
            (((midr) & MIDR_CPU_MODEL_MASK) == MIDR_CPU_MODEL(imp, partnum))
+
+#if defined(__ASSEMBLER__)
+
+   /*
+    * Support macros for
+    *   - Armv8.3-A Pointer Authentication and
+    *   - Armv8.5-A Branch Target Identification
+    * features which require emitting a .note.gnu.property section with the
+    * appropriate architecture-dependent feature bits set.
+    * Read more: "ELF for the Arm® 64-bit Architecture"
+    */
+
+#  if defined(__ARM_FEATURE_BTI_DEFAULT) && __ARM_FEATURE_BTI_DEFAULT == 1
+#   define GNU_PROPERTY_AARCH64_BTI (1 << 0)   /* Has Branch Target Identification */
+#   define AARCH64_VALID_CALL_TARGET hint #34  /* BTI 'c' */
+#  else
+#   define GNU_PROPERTY_AARCH64_BTI 0  /* No Branch Target Identification */
+#   define AARCH64_VALID_CALL_TARGET
+#  endif
+
+#  if defined(__ARM_FEATURE_PAC_DEFAULT) && \
+       (__ARM_FEATURE_PAC_DEFAULT & 1) == 1  /* Signed with A-key */
+#   define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+     (1 << 1)                                       /* Has Pointer Authentication */
+#   define AARCH64_SIGN_LINK_REGISTER hint #25      /* PACIASP */
+#   define AARCH64_VALIDATE_LINK_REGISTER hint #29  /* AUTIASP */
+#  elif defined(__ARM_FEATURE_PAC_DEFAULT) && \
+       (__ARM_FEATURE_PAC_DEFAULT & 2) == 2  /* Signed with B-key */
+#   define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+     (1 << 1)                                       /* Has Pointer Authentication */
+#   define AARCH64_SIGN_LINK_REGISTER hint #27      /* PACIBSP */
+#   define AARCH64_VALIDATE_LINK_REGISTER hint #31  /* AUTIBSP */
+#  else
+#   define GNU_PROPERTY_AARCH64_POINTER_AUTH 0  /* No Pointer Authentication */
+#   if GNU_PROPERTY_AARCH64_BTI != 0
+#    define AARCH64_SIGN_LINK_REGISTER AARCH64_VALID_CALL_TARGET
+#   else
+#    define AARCH64_SIGN_LINK_REGISTER
+#   endif
+#   define AARCH64_VALIDATE_LINK_REGISTER
+#  endif
+
+#  if GNU_PROPERTY_AARCH64_POINTER_AUTH != 0 || GNU_PROPERTY_AARCH64_BTI != 0
+    .pushsection .note.gnu.property, "a";
+    .balign 8;
+    .long 4;
+    .long 0x10;
+    .long 0x5;
+    .asciz "GNU";
+    .long 0xc0000000; /* GNU_PROPERTY_AARCH64_FEATURE_1_AND */
+    .long 4;
+    .long (GNU_PROPERTY_AARCH64_POINTER_AUTH | GNU_PROPERTY_AARCH64_BTI);
+    .long 0;
+    .popsection;
+#  endif
+
+# endif  /* defined __ASSEMBLER__ */
+
 #endif
diff --git a/crypto/bn/asm/armv8-mont.pl b/crypto/bn/asm/armv8-mont.pl
index 54d2e8245f..21ab12bdf0 100755
--- a/crypto/bn/asm/armv8-mont.pl
+++ b/crypto/bn/asm/armv8-mont.pl
@@ -67,8 +67,8 @@ $n0="x4";	# const BN_ULONG *n0,
 $num="x5";	# int num);
 
 $code.=<<___;
+#include "arm_arch.h"
 #ifndef	__KERNEL__
-# include "arm_arch.h"
 .extern OPENSSL_armv8_rsa_neonized
 .hidden OPENSSL_armv8_rsa_neonized
 #endif
@@ -78,6 +78,7 @@ $code.=<<___;
 .type	bn_mul_mont,%function
 .align	5
 bn_mul_mont:
+	AARCH64_SIGN_LINK_REGISTER
 .Lbn_mul_mont:
 	tst	$num,#3
 	b.ne	.Lmul_mont
@@ -288,6 +289,7 @@ bn_mul_mont:
 	mov	x0,#1
 	ldp	x23,x24,[x29,#48]
 	ldr	x29,[sp],#64
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	bn_mul_mont,.-bn_mul_mont
 ___
@@ -309,6 +311,8 @@ $code.=<<___;
 .type	bn_mul8x_mont_neon,%function
 .align	5
 bn_mul8x_mont_neon:
+	// Not adding AARCH64_SIGN_LINK_REGISTER here because bn_mul8x_mont_neon is jumped to
+	// only from bn_mul_mont which has already signed the return address.
 	stp	x29,x30,[sp,#-80]!
 	mov	x16,sp
 	stp	d8,d9,[sp,#16]
@@ -649,6 +653,7 @@ $code.=<<___;
 	ldp	d10,d11,[sp,#32]
 	ldp	d8,d9,[sp,#16]
 	ldr	x29,[sp],#80
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret			// bx lr
 
 .size	bn_mul8x_mont_neon,.-bn_mul8x_mont_neon
@@ -671,7 +676,8 @@ __bn_sqr8x_mont:
 	cmp	$ap,$bp
 	b.ne	__bn_mul4x_mont
 .Lsqr8x_mont:
-	.inst	0xd503233f		// paciasp
+	// Not adding AARCH64_SIGN_LINK_REGISTER here because __bn_sqr8x_mont is jumped to
+	// only from bn_mul_mont which has already signed the return address.
 	stp	x29,x30,[sp,#-128]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1425,7 +1431,8 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldr	x29,[sp],#128
-	.inst	0xd50323bf		// autiasp
+	// x30 is loaded earlier
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	__bn_sqr8x_mont,.-__bn_sqr8x_mont
 ___
@@ -1449,7 +1456,8 @@ $code.=<<___;
 .type	__bn_mul4x_mont,%function
 .align	5
 __bn_mul4x_mont:
-	.inst	0xd503233f		// paciasp
+	// Not adding AARCH64_SIGN_LINK_REGISTER here because __bn_mul4x_mont is jumped to
+	// only from bn_mul_mont (or __bn_sqr8x_mont from bn_mul_mont) which has already signed the return address.
 	stp	x29,x30,[sp,#-128]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1883,7 +1891,8 @@ __bn_mul4x_mont:
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldr	x29,[sp],#128
-	.inst	0xd50323bf		// autiasp
+	// x30 loaded earlier
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	__bn_mul4x_mont,.-__bn_mul4x_mont
 ___
diff --git a/crypto/chacha/asm/chacha-armv8.pl b/crypto/chacha/asm/chacha-armv8.pl
index dcdc4a04e3..e1a8b81594 100755
--- a/crypto/chacha/asm/chacha-armv8.pl
+++ b/crypto/chacha/asm/chacha-armv8.pl
@@ -132,8 +132,8 @@ my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
 }
 
 $code.=<<___;
+#include "arm_arch.h"
 #ifndef	__KERNEL__
-# include "arm_arch.h"
 .extern	OPENSSL_armcap_P
 .hidden	OPENSSL_armcap_P
 #endif
@@ -153,6 +153,7 @@ $code.=<<___;
 .type	ChaCha20_ctr32,%function
 .align	5
 ChaCha20_ctr32:
+	AARCH64_SIGN_LINK_REGISTER
 	cbz	$len,.Labort
 	cmp	$len,#192
 	b.lo	.Lshort
@@ -165,7 +166,6 @@ ChaCha20_ctr32:
 #endif
 
 .Lshort:
-	.inst	0xd503233f			// paciasp
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 
@@ -285,8 +285,8 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf			// autiasp
 .Labort:
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 
 .align	4
@@ -342,7 +342,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ChaCha20_ctr32,.-ChaCha20_ctr32
 ___
@@ -432,8 +432,8 @@ $code.=<<___;
 .type	ChaCha20_neon,%function
 .align	5
 ChaCha20_neon:
+	AARCH64_SIGN_LINK_REGISTER
 .LChaCha20_neon:
-	.inst	0xd503233f			// paciasp
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 
@@ -667,7 +667,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 
 .align	4
@@ -799,7 +799,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ChaCha20_neon,.-ChaCha20_neon
 ___
@@ -844,7 +844,7 @@ $code.=<<___;
 .type	ChaCha20_512_neon,%function
 .align	5
 ChaCha20_512_neon:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 
@@ -1268,7 +1268,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ChaCha20_512_neon,.-ChaCha20_512_neon
 ___
diff --git a/crypto/ec/asm/ecp_nistz256-armv8.pl b/crypto/ec/asm/ecp_nistz256-armv8.pl
index 81ee3947d7..6c5d0e8b3c 100644
--- a/crypto/ec/asm/ecp_nistz256-armv8.pl
+++ b/crypto/ec/asm/ecp_nistz256-armv8.pl
@@ -122,7 +122,7 @@ $code.=<<___;
 .type	ecp_nistz256_to_mont,%function
 .align	6
 ecp_nistz256_to_mont:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-32]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -138,7 +138,7 @@ ecp_nistz256_to_mont:
 
 	ldp	x19,x20,[sp,#16]
 	ldp	x29,x30,[sp],#32
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_to_mont,.-ecp_nistz256_to_mont
 
@@ -147,7 +147,7 @@ ecp_nistz256_to_mont:
 .type	ecp_nistz256_from_mont,%function
 .align	4
 ecp_nistz256_from_mont:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-32]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -163,7 +163,7 @@ ecp_nistz256_from_mont:
 
 	ldp	x19,x20,[sp,#16]
 	ldp	x29,x30,[sp],#32
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_from_mont,.-ecp_nistz256_from_mont
 
@@ -173,7 +173,7 @@ ecp_nistz256_from_mont:
 .type	ecp_nistz256_mul_mont,%function
 .align	4
 ecp_nistz256_mul_mont:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-32]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -188,7 +188,7 @@ ecp_nistz256_mul_mont:
 
 	ldp	x19,x20,[sp,#16]
 	ldp	x29,x30,[sp],#32
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_mul_mont,.-ecp_nistz256_mul_mont
 
@@ -197,7 +197,7 @@ ecp_nistz256_mul_mont:
 .type	ecp_nistz256_sqr_mont,%function
 .align	4
 ecp_nistz256_sqr_mont:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-32]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -211,7 +211,7 @@ ecp_nistz256_sqr_mont:
 
 	ldp	x19,x20,[sp,#16]
 	ldp	x29,x30,[sp],#32
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_sqr_mont,.-ecp_nistz256_sqr_mont
 
@@ -221,7 +221,7 @@ ecp_nistz256_sqr_mont:
 .type	ecp_nistz256_add,%function
 .align	4
 ecp_nistz256_add:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -235,7 +235,7 @@ ecp_nistz256_add:
 	bl	__ecp_nistz256_add
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_add,.-ecp_nistz256_add
 
@@ -244,7 +244,7 @@ ecp_nistz256_add:
 .type	ecp_nistz256_div_by_2,%function
 .align	4
 ecp_nistz256_div_by_2:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -256,7 +256,7 @@ ecp_nistz256_div_by_2:
 	bl	__ecp_nistz256_div_by_2
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		//  autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_div_by_2,.-ecp_nistz256_div_by_2
 
@@ -265,7 +265,7 @@ ecp_nistz256_div_by_2:
 .type	ecp_nistz256_mul_by_2,%function
 .align	4
 ecp_nistz256_mul_by_2:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -281,7 +281,7 @@ ecp_nistz256_mul_by_2:
 	bl	__ecp_nistz256_add	// ret = a+a	// 2*a
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_mul_by_2,.-ecp_nistz256_mul_by_2
 
@@ -290,7 +290,7 @@ ecp_nistz256_mul_by_2:
 .type	ecp_nistz256_mul_by_3,%function
 .align	4
 ecp_nistz256_mul_by_3:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -317,7 +317,7 @@ ecp_nistz256_mul_by_3:
 	bl	__ecp_nistz256_add	// ret += a	// 2*a+a=3*a
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_mul_by_3,.-ecp_nistz256_mul_by_3
 
@@ -327,7 +327,7 @@ ecp_nistz256_mul_by_3:
 .type	ecp_nistz256_sub,%function
 .align	4
 ecp_nistz256_sub:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -339,7 +339,7 @@ ecp_nistz256_sub:
 	bl	__ecp_nistz256_sub_from
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_sub,.-ecp_nistz256_sub
 
@@ -348,7 +348,7 @@ ecp_nistz256_sub:
 .type	ecp_nistz256_neg,%function
 .align	4
 ecp_nistz256_neg:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -363,7 +363,7 @@ ecp_nistz256_neg:
 	bl	__ecp_nistz256_sub_from
 
 	ldp	x29,x30,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_neg,.-ecp_nistz256_neg
 
@@ -724,7 +724,7 @@ $code.=<<___;
 .type	ecp_nistz256_point_double,%function
 .align	5
 ecp_nistz256_point_double:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -859,7 +859,7 @@ ecp_nistz256_point_double:
 	ldp	x19,x20,[x29,#16]
 	ldp	x21,x22,[x29,#32]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_point_double,.-ecp_nistz256_point_double
 ___
@@ -882,7 +882,7 @@ $code.=<<___;
 .type	ecp_nistz256_point_add,%function
 .align	5
 ecp_nistz256_point_add:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1117,7 +1117,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#96
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_point_add,.-ecp_nistz256_point_add
 ___
@@ -1139,7 +1139,7 @@ $code.=<<___;
 .type	ecp_nistz256_point_add_affine,%function
 .align	5
 ecp_nistz256_point_add_affine:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-80]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1328,7 +1328,7 @@ $code.=<<___;
 	ldp	x23,x24,[x29,#48]
 	ldp	x25,x26,[x29,#64]
 	ldp	x29,x30,[sp],#80
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	ecp_nistz256_point_add_affine,.-ecp_nistz256_point_add_affine
 ___
@@ -1346,6 +1346,8 @@ $code.=<<___;
 .type	ecp_nistz256_ord_mul_mont,%function
 .align	4
 ecp_nistz256_ord_mul_mont:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-64]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1487,6 +1489,8 @@ $code.=<<___;
 .type	ecp_nistz256_ord_sqr_mont,%function
 .align	4
 ecp_nistz256_ord_sqr_mont:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-64]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -1641,6 +1645,8 @@ $code.=<<___;
 .type	ecp_nistz256_scatter_w5,%function
 .align	4
 ecp_nistz256_scatter_w5:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -1703,6 +1709,8 @@ ecp_nistz256_scatter_w5:
 .type	ecp_nistz256_gather_w5,%function
 .align	4
 ecp_nistz256_gather_w5:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -1780,6 +1788,8 @@ ecp_nistz256_gather_w5:
 .type	ecp_nistz256_scatter_w7,%function
 .align	4
 ecp_nistz256_scatter_w7:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
@@ -1824,6 +1834,8 @@ ecp_nistz256_scatter_w7:
 .type	ecp_nistz256_gather_w7,%function
 .align	4
 ecp_nistz256_gather_w7:
+	AARCH64_VALID_CALL_TARGET
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
diff --git a/crypto/modes/asm/aes-gcm-armv8_64.pl b/crypto/modes/asm/aes-gcm-armv8_64.pl
index 3b9d5b6511..ff5809ec22 100755
--- a/crypto/modes/asm/aes-gcm-armv8_64.pl
+++ b/crypto/modes/asm/aes-gcm-armv8_64.pl
@@ -256,6 +256,7 @@ $code.=<<___;
 .type   aes_gcm_enc_128_kernel,%function
 .align  4
 aes_gcm_enc_128_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L128_enc_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
@@ -1089,6 +1090,7 @@ $code.=<<___;
 .type   aes_gcm_dec_128_kernel,%function
 .align  4
 aes_gcm_dec_128_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L128_dec_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
@@ -1973,6 +1975,7 @@ $code.=<<___;
 .type   aes_gcm_enc_192_kernel,%function
 .align  4
 aes_gcm_enc_192_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L192_enc_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
@@ -2858,6 +2861,7 @@ $code.=<<___;
 .type   aes_gcm_dec_192_kernel,%function
 .align  4
 aes_gcm_dec_192_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L192_dec_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
@@ -3797,6 +3801,7 @@ $code.=<<___;
 .type   aes_gcm_enc_256_kernel,%function
 .align  4
 aes_gcm_enc_256_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L256_enc_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
@@ -4729,6 +4734,7 @@ $code.=<<___;
 .type   aes_gcm_dec_256_kernel,%function
 .align  4
 aes_gcm_dec_256_kernel:
+	AARCH64_VALID_CALL_TARGET
 	cbz     x1, .L256_dec_ret
 	stp     x19, x20, [sp, #-112]!
 	mov     x16, x4
diff --git a/crypto/modes/asm/ghashv8-armx.pl b/crypto/modes/asm/ghashv8-armx.pl
index b1d35d25b5..57f893e77c 100644
--- a/crypto/modes/asm/ghashv8-armx.pl
+++ b/crypto/modes/asm/ghashv8-armx.pl
@@ -107,6 +107,11 @@ $code.=<<___;
 .type	gcm_init_v8,%function
 .align	4
 gcm_init_v8:
+___
+$code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+___
+$code.=<<___;
 	vld1.64		{$t1},[x1]		@ load input H
 	vmov.i8		$xC2,#0xe1
 	vshl.i64	$xC2,$xC2,#57		@ 0xc2.0
@@ -214,6 +219,11 @@ $code.=<<___;
 .type	gcm_gmult_v8,%function
 .align	4
 gcm_gmult_v8:
+___
+$code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
+___
+$code.=<<___;
 	vld1.64		{$t1},[$Xi]		@ load Xi
 	vmov.i8		$xC2,#0xe1
 	vld1.64		{$H-$Hhl},[$Htbl]	@ load twisted H, ...
@@ -268,6 +278,7 @@ $code.=<<___;
 gcm_ghash_v8:
 ___
 $code.=<<___	if ($flavour =~ /64/);
+	AARCH64_VALID_CALL_TARGET
 	cmp		$len,#64
 	b.hs		.Lgcm_ghash_v8_4x
 ___
diff --git a/crypto/poly1305/asm/poly1305-armv8.pl b/crypto/poly1305/asm/poly1305-armv8.pl
index 113a2151b6..20816c4283 100755
--- a/crypto/poly1305/asm/poly1305-armv8.pl
+++ b/crypto/poly1305/asm/poly1305-armv8.pl
@@ -72,6 +72,7 @@ $code.=<<___;
 .type	poly1305_init,%function
 .align	5
 poly1305_init:
+	AARCH64_VALID_CALL_TARGET
 	cmp	$inp,xzr
 	stp	xzr,xzr,[$ctx]		// zero hash value
 	stp	xzr,xzr,[$ctx,#16]	// [along with is_base2_26]
@@ -119,6 +120,9 @@ poly1305_init:
 .align	5
 poly1305_blocks:
 .Lpoly1305_blocks:
+	// The symbol .Lpoly1305_blocks is not a .globl symbol
+	// but a pointer to it is returned by poly1305_init
+	AARCH64_VALID_CALL_TARGET
 	ands	$len,$len,#-16
 	b.eq	.Lno_data
 
@@ -184,6 +188,9 @@ poly1305_blocks:
 .align	5
 poly1305_emit:
 .Lpoly1305_emit:
+	// The symbol .poly1305_emit is not a .globl symbol
+	// but a pointer to it is returned by poly1305_init
+	AARCH64_VALID_CALL_TARGET
 	ldp	$h0,$h1,[$ctx]		// load hash base 2^64
 	ldr	$h2,[$ctx,#16]
 	ldp	$t0,$t1,[$nonce]	// load nonce
@@ -291,13 +298,16 @@ poly1305_splat:
 .align	5
 poly1305_blocks_neon:
 .Lpoly1305_blocks_neon:
+	// The symbol .Lpoly1305_blocks_neon is not a .globl symbol
+	// but a pointer to it is returned by poly1305_init
+	AARCH64_VALID_CALL_TARGET
 	ldr	$is_base2_26,[$ctx,#24]
 	cmp	$len,#128
 	b.hs	.Lblocks_neon
 	cbz	$is_base2_26,.Lpoly1305_blocks
 
 .Lblocks_neon:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-80]!
 	add	x29,sp,#0
 
@@ -867,7 +877,7 @@ poly1305_blocks_neon:
 
 .Lno_data_neon:
 	ldr	x29,[sp],#80
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	poly1305_blocks_neon,.-poly1305_blocks_neon
 
@@ -875,6 +885,9 @@ poly1305_blocks_neon:
 .align	5
 poly1305_emit_neon:
 .Lpoly1305_emit_neon:
+	// The symbol .Lpoly1305_emit_neon is not a .globl symbol
+	// but a pointer to it is returned by poly1305_init
+	AARCH64_VALID_CALL_TARGET
 	ldr	$is_base2_26,[$ctx,#24]
 	cbz	$is_base2_26,poly1305_emit
 
diff --git a/crypto/sha/asm/keccak1600-armv8.pl b/crypto/sha/asm/keccak1600-armv8.pl
index 65102e7c29..cf54b62c63 100755
--- a/crypto/sha/asm/keccak1600-armv8.pl
+++ b/crypto/sha/asm/keccak1600-armv8.pl
@@ -80,6 +80,8 @@ my @rhotates = ([  0,  1, 62, 28, 27 ],
                 [ 18,  2, 61, 56, 14 ]);
 
 $code.=<<___;
+#include "arm_arch.h"
+
 .text
 
 .align 8	// strategic alignment and padding that allows to use
@@ -125,7 +127,7 @@ $code.=<<___;
 .align	5
 KeccakF1600_int:
 	adr	$C[2],iotas
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	$C[2],x30,[sp,#16]		// 32 bytes on top are mine
 	b	.Loop
 .align	4
@@ -297,14 +299,14 @@ $code.=<<___;
 	bne	.Loop
 
 	ldr	x30,[sp,#24]
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	KeccakF1600_int,.-KeccakF1600_int
 
 .type	KeccakF1600,%function
 .align	5
 KeccakF1600:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-128]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -354,7 +356,7 @@ KeccakF1600:
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#128
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	KeccakF1600,.-KeccakF1600
 
@@ -362,7 +364,7 @@ KeccakF1600:
 .type	SHA3_absorb,%function
 .align	5
 SHA3_absorb:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-128]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -460,7 +462,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#128
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	SHA3_absorb,.-SHA3_absorb
 ___
@@ -471,7 +473,7 @@ $code.=<<___;
 .type	SHA3_squeeze,%function
 .align	5
 SHA3_squeeze:
-	.inst	0xd503233f			// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-48]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -534,7 +536,7 @@ SHA3_squeeze:
 	ldp	x19,x20,[sp,#16]
 	ldp	x21,x22,[sp,#32]
 	ldp	x29,x30,[sp],#48
-	.inst	0xd50323bf			// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	SHA3_squeeze,.-SHA3_squeeze
 ___
@@ -653,7 +655,7 @@ KeccakF1600_ce:
 .type	KeccakF1600_cext,%function
 .align	5
 KeccakF1600_cext:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-80]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#16]		// per ABI requirement
@@ -686,7 +688,7 @@ $code.=<<___;
 	ldp	d12,d13,[sp,#48]
 	ldp	d14,d15,[sp,#64]
 	ldr	x29,[sp],#80
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	KeccakF1600_cext,.-KeccakF1600_cext
 ___
@@ -699,7 +701,7 @@ $code.=<<___;
 .type	SHA3_absorb_cext,%function
 .align	5
 SHA3_absorb_cext:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-80]!
 	add	x29,sp,#0
 	stp	d8,d9,[sp,#16]		// per ABI requirement
@@ -771,7 +773,7 @@ $code.=<<___;
 	ldp	d12,d13,[sp,#48]
 	ldp	d14,d15,[sp,#64]
 	ldp	x29,x30,[sp],#80
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	SHA3_absorb_cext,.-SHA3_absorb_cext
 ___
@@ -783,7 +785,7 @@ $code.=<<___;
 .type	SHA3_squeeze_cext,%function
 .align	5
 SHA3_squeeze_cext:
-	.inst	0xd503233f		// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 	mov	x9,$ctx
@@ -839,7 +841,7 @@ SHA3_squeeze_cext:
 
 .Lsqueeze_done_ce:
 	ldr	x29,[sp],#16
-	.inst	0xd50323bf		// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	SHA3_squeeze_cext,.-SHA3_squeeze_cext
 ___
diff --git a/crypto/sha/asm/sha1-armv8.pl b/crypto/sha/asm/sha1-armv8.pl
index cdea8845af..5f23a20c1a 100644
--- a/crypto/sha/asm/sha1-armv8.pl
+++ b/crypto/sha/asm/sha1-armv8.pl
@@ -175,8 +175,8 @@ ___
 }
 
 $code.=<<___;
+#include "arm_arch.h"
 #ifndef	__KERNEL__
-# include "arm_arch.h"
 .extern OPENSSL_armcap_P
 .hidden OPENSSL_armcap_P
 #endif
@@ -187,11 +187,13 @@ $code.=<<___;
 .type	sha1_block_data_order,%function
 .align	6
 sha1_block_data_order:
+	AARCH64_VALID_CALL_TARGET
 	adrp	x16,OPENSSL_armcap_P
 	ldr	w16,[x16,#:lo12:OPENSSL_armcap_P]
 	tst	w16,#ARMV8_SHA1
 	b.ne	.Lv8_entry
 
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-96]!
 	add	x29,sp,#0
 	stp	x19,x20,[sp,#16]
@@ -253,6 +255,7 @@ $code.=<<___;
 .align	6
 sha1_block_armv8:
 .Lv8_entry:
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp	x29,x30,[sp,#-16]!
 	add	x29,sp,#0
 
diff --git a/crypto/sha/asm/sha512-armv8.pl b/crypto/sha/asm/sha512-armv8.pl
index 6bcff0b7d3..f900882fee 100644
--- a/crypto/sha/asm/sha512-armv8.pl
+++ b/crypto/sha/asm/sha512-armv8.pl
@@ -190,8 +190,8 @@ ___
 }
 
 $code.=<<___;
+#include "arm_arch.h"
 #ifndef	__KERNEL__
-# include "arm_arch.h"
 .extern	OPENSSL_armcap_P
 .hidden	OPENSSL_armcap_P
 #endif
@@ -202,6 +202,7 @@ $code.=<<___;
 .type	$func,%function
 .align	6
 $func:
+	AARCH64_VALID_CALL_TARGET
 #ifndef	__KERNEL__
 	adrp	x16,OPENSSL_armcap_P
 	ldr	w16,[x16,#:lo12:OPENSSL_armcap_P]
@@ -218,7 +219,7 @@ $code.=<<___	if ($SZ==8);
 ___
 $code.=<<___;
 #endif
-	.inst	0xd503233f				// paciasp
+	AARCH64_SIGN_LINK_REGISTER
 	stp	x29,x30,[sp,#-128]!
 	add	x29,sp,#0
 
@@ -280,7 +281,7 @@ $code.=<<___;
 	ldp	x25,x26,[x29,#64]
 	ldp	x27,x28,[x29,#80]
 	ldp	x29,x30,[sp],#128
-	.inst	0xd50323bf				// autiasp
+	AARCH64_VALIDATE_LINK_REGISTER
 	ret
 .size	$func,.-$func
 
@@ -370,6 +371,7 @@ $code.=<<___;
 .align	6
 sha256_block_armv8:
 .Lv8_entry:
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
 	stp		x29,x30,[sp,#-16]!
 	add		x29,sp,#0
 
@@ -632,7 +634,9 @@ $code.=<<___;
 .type	sha256_block_neon,%function
 .align	4
 sha256_block_neon:
+	AARCH64_VALID_CALL_TARGET
 .Lneon_entry:
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later
 	stp	x29, x30, [sp, #-16]!
 	mov	x29, sp
 	sub	sp,sp,#16*4
@@ -743,6 +747,7 @@ $code.=<<___;
 .align	6
 sha512_block_armv8:
 .Lv8_entry:
+	// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later
 	stp		x29,x30,[sp,#-16]!
 	add		x29,sp,#0
 
diff --git a/crypto/sha/build.info b/crypto/sha/build.info
index d61f7de9b6..556a658d8b 100644
--- a/crypto/sha/build.info
+++ b/crypto/sha/build.info
@@ -153,6 +153,7 @@ INCLUDE[sha256-armv8.o]=..
 GENERATE[sha512-armv8.S]=asm/sha512-armv8.pl
 INCLUDE[sha512-armv8.o]=..
 GENERATE[keccak1600-armv8.S]=asm/keccak1600-armv8.pl
+INCLUDE[keccak1600-armv8.o]=..
 
 GENERATE[sha1-s390x.S]=asm/sha1-s390x.pl
 INCLUDE[sha1-s390x.o]=..
-- 
2.37.3.windows.1